Re: [PATCH v8 2/2] hw/misc/sifive_u_otp: Add backend drive support

[Alistair Francis]

On Mon, Oct 19, 2020 at 8:37 PM Green Wan <green.wan@sifive.com> wrote:
>
> Add '-drive' support to OTP device. Allow users to assign a raw file
> as OTP image.
>
> test commands for 16k otp.img filled with zero:
>
> $ dd if=/dev/zero of=./otp.img bs=1k count=16
> $ ./qemu-system-riscv64 -M sifive_u -m 256M -nographic -bios none \
> -kernel ../opensbi/build/platform/sifive/fu540/firmware/fw_payload.elf \
> -d guest_errors -drive if=none,format=raw,file=otp.img
>
> Signed-off-by: Green Wan <green.wan@sifive.com>
> Reviewed-by: Bin Meng <bin.meng@windriver.com>
> Tested-by: Bin Meng <bin.meng@windriver.com>

Acked-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

> ---
>  hw/misc/sifive_u_otp.c         | 65 ++++++++++++++++++++++++++++++++++
>  include/hw/misc/sifive_u_otp.h |  2 ++
>  2 files changed, 67 insertions(+)
>
> diff --git a/hw/misc/sifive_u_otp.c b/hw/misc/sifive_u_otp.c
> index b9238d64cb..60066375ab 100644
> --- a/hw/misc/sifive_u_otp.c
> +++ b/hw/misc/sifive_u_otp.c
> @@ -19,11 +19,14 @@
>   */
>
>  #include "qemu/osdep.h"
> +#include "qapi/error.h"
>  #include "hw/qdev-properties.h"
>  #include "hw/sysbus.h"
>  #include "qemu/log.h"
>  #include "qemu/module.h"
>  #include "hw/misc/sifive_u_otp.h"
> +#include "sysemu/blockdev.h"
> +#include "sysemu/block-backend.h"
>
>  #define WRITTEN_BIT_ON 0x1
>
> @@ -54,6 +57,16 @@ static uint64_t sifive_u_otp_read(void *opaque, hwaddr 
> addr, unsigned int size)
>          if ((s->pce & SIFIVE_U_OTP_PCE_EN) &&
>              (s->pdstb & SIFIVE_U_OTP_PDSTB_EN) &&
>              (s->ptrim & SIFIVE_U_OTP_PTRIM_EN)) {
> +
> +            /* read from backend */
> +            if (s->blk) {
> +                int32_t buf;
> +
> +                blk_pread(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD, &buf,
> +                          SIFIVE_U_OTP_FUSE_WORD);
> +                return buf;
> +            }
> +
>              return s->fuse[s->pa & SIFIVE_U_OTP_PA_MASK];
>          } else {
>              return 0xff;
> @@ -145,6 +158,12 @@ static void sifive_u_otp_write(void *opaque, hwaddr addr,
>              /* write bit data */
>              SET_FUSEARRAY_BIT(s->fuse, s->pa, s->paio, s->pdin);
>
> +            /* write to backend */
> +            if (s->blk) {
> +                blk_pwrite(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD,
> +                           &s->fuse[s->pa], SIFIVE_U_OTP_FUSE_WORD, 0);
> +            }
> +
>              /* update written bit */
>              SET_FUSEARRAY_BIT(s->fuse_wo, s->pa, s->paio, WRITTEN_BIT_ON);
>          }
> @@ -168,16 +187,48 @@ static const MemoryRegionOps sifive_u_otp_ops = {
>
>  static Property sifive_u_otp_properties[] = {
>      DEFINE_PROP_UINT32("serial", SiFiveUOTPState, serial, 0),
> +    DEFINE_PROP_DRIVE("drive", SiFiveUOTPState, blk),
>      DEFINE_PROP_END_OF_LIST(),
>  };
>
>  static void sifive_u_otp_realize(DeviceState *dev, Error **errp)
>  {
>      SiFiveUOTPState *s = SIFIVE_U_OTP(dev);
> +    DriveInfo *dinfo;
>
>      memory_region_init_io(&s->mmio, OBJECT(dev), &sifive_u_otp_ops, s,
>                            TYPE_SIFIVE_U_OTP, SIFIVE_U_OTP_REG_SIZE);
>      sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
> +
> +    dinfo = drive_get_next(IF_NONE);
> +    if (dinfo) {
> +        int ret;
> +        uint64_t perm;
> +        int filesize;
> +        BlockBackend *blk;
> +
> +        blk = blk_by_legacy_dinfo(dinfo);
> +        filesize = SIFIVE_U_OTP_NUM_FUSES * SIFIVE_U_OTP_FUSE_WORD;
> +        if (blk_getlength(blk) < filesize) {
> +            error_setg(errp, "OTP drive size < 16K");
> +            return;
> +        }
> +
> +        qdev_prop_set_drive_err(dev, "drive", blk, errp);
> +
> +        if (s->blk) {
> +            perm = BLK_PERM_CONSISTENT_READ |
> +                   (blk_is_read_only(s->blk) ? 0 : BLK_PERM_WRITE);
> +            ret = blk_set_perm(s->blk, perm, BLK_PERM_ALL, errp);
> +            if (ret < 0) {
> +                return;
> +            }
> +
> +            if (blk_pread(s->blk, 0, s->fuse, filesize) != filesize) {
> +                error_setg(errp, "failed to read the initial flash content");
> +            }
> +        }
> +    }
>  }
>
>  static void sifive_u_otp_reset(DeviceState *dev)
> @@ -191,6 +242,20 @@ static void sifive_u_otp_reset(DeviceState *dev)
>      s->fuse[SIFIVE_U_OTP_SERIAL_ADDR] = s->serial;
>      s->fuse[SIFIVE_U_OTP_SERIAL_ADDR + 1] = ~(s->serial);
>
> +    if (s->blk) {
> +        /* Put serial number to backend as well*/
> +        uint32_t serial_data;
> +        int index = SIFIVE_U_OTP_SERIAL_ADDR;
> +
> +        serial_data = s->serial;
> +        blk_pwrite(s->blk, index * SIFIVE_U_OTP_FUSE_WORD,
> +                   &serial_data, SIFIVE_U_OTP_FUSE_WORD, 0);
> +
> +        serial_data = ~(s->serial);
> +        blk_pwrite(s->blk, (index + 1) * SIFIVE_U_OTP_FUSE_WORD,
> +                   &serial_data, SIFIVE_U_OTP_FUSE_WORD, 0);
> +    }
> +
>      /* Initialize write-once map */
>      memset(s->fuse_wo, 0x00, sizeof(s->fuse_wo));
>  }
> diff --git a/include/hw/misc/sifive_u_otp.h b/include/hw/misc/sifive_u_otp.h
> index ebffbc1fa5..5d0d7df455 100644
> --- a/include/hw/misc/sifive_u_otp.h
> +++ b/include/hw/misc/sifive_u_otp.h
> @@ -46,6 +46,7 @@
>
>  #define SIFIVE_U_OTP_PA_MASK        0xfff
>  #define SIFIVE_U_OTP_NUM_FUSES      0x1000
> +#define SIFIVE_U_OTP_FUSE_WORD      4
>  #define SIFIVE_U_OTP_SERIAL_ADDR    0xfc
>
>  #define SIFIVE_U_OTP_REG_SIZE       0x1000
> @@ -80,6 +81,7 @@ struct SiFiveUOTPState {
>      uint32_t fuse_wo[SIFIVE_U_OTP_NUM_FUSES];
>      /* config */
>      uint32_t serial;
> +    BlockBackend *blk;
>  };
>
>  #endif /* HW_SIFIVE_U_OTP_H */
> --
> 2.17.1
>