[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 13/16] util/vfio-helpers: Introduce qemu_vfio_pci_msix_init_irqs(
From: |
Philippe Mathieu-Daudé |
Subject: |
[PATCH 13/16] util/vfio-helpers: Introduce qemu_vfio_pci_msix_init_irqs() |
Date: |
Tue, 20 Oct 2020 19:24:25 +0200 |
qemu_vfio_pci_init_irq() allows us to initialize any type of IRQ,
but only one. Introduce qemu_vfio_pci_msix_init_irqs() which is
specific to MSIX IRQ type, and allow us to use multiple IRQs
(thus passing multiple eventfd notifiers).
All eventfd notifiers are initialized with the special '-1' value
meaning "un-assigned".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
include/qemu/vfio-helpers.h | 6 +++-
util/vfio-helpers.c | 65 ++++++++++++++++++++++++++++++++++++-
util/trace-events | 1 +
3 files changed, 70 insertions(+), 2 deletions(-)
diff --git a/include/qemu/vfio-helpers.h b/include/qemu/vfio-helpers.h
index 4b97a904e93..492072cba2f 100644
--- a/include/qemu/vfio-helpers.h
+++ b/include/qemu/vfio-helpers.h
@@ -1,11 +1,13 @@
/*
* QEMU VFIO helpers
*
- * Copyright 2016 - 2018 Red Hat, Inc.
+ * Copyright 2016 - 2020 Red Hat, Inc.
*
* Authors:
* Fam Zheng <famz@redhat.com>
+ * Philippe Mathieu-Daudé <philmd@redhat.com>
*
+ * SPDX-License-Identifier: GPL-2.0-or-later
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
@@ -29,5 +31,7 @@ void qemu_vfio_pci_unmap_bar(QEMUVFIOState *s, int index,
void *bar,
uint64_t offset, uint64_t size);
int qemu_vfio_pci_init_irq(QEMUVFIOState *s, EventNotifier *e,
int irq_type, Error **errp);
+int qemu_vfio_pci_msix_init_irqs(QEMUVFIOState *s,
+ unsigned *irq_count, Error **errp);
#endif
diff --git a/util/vfio-helpers.c b/util/vfio-helpers.c
index 874d76c2a2a..d88e2c7dc1f 100644
--- a/util/vfio-helpers.c
+++ b/util/vfio-helpers.c
@@ -1,11 +1,13 @@
/*
* VFIO utility
*
- * Copyright 2016 - 2018 Red Hat, Inc.
+ * Copyright 2016 - 2020 Red Hat, Inc.
*
* Authors:
* Fam Zheng <famz@redhat.com>
+ * Philippe Mathieu-Daudé <philmd@redhat.com>
*
+ * SPDX-License-Identifier: GPL-2.0-or-later
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
@@ -230,6 +232,67 @@ int qemu_vfio_pci_init_irq(QEMUVFIOState *s, EventNotifier
*e,
return 0;
}
+/**
+ * Initialize device MSIX IRQs and register event notifiers.
+ * @irq_count: pointer to number of MSIX IRQs to initialize
+ *
+ * If the number of IRQs requested exceeds the available on the device,
+ * store the number of available IRQs in @irq_count and return -EOVERFLOW.
+ */
+int qemu_vfio_pci_msix_init_irqs(QEMUVFIOState *s,
+ unsigned *irq_count, Error **errp)
+{
+ int r;
+ size_t irq_set_size;
+ struct vfio_irq_set *irq_set;
+ struct vfio_irq_info irq_info = {
+ .argsz = sizeof(irq_info),
+ .index = VFIO_PCI_MSIX_IRQ_INDEX
+ };
+
+ if (ioctl(s->device, VFIO_DEVICE_GET_IRQ_INFO, &irq_info)) {
+ error_setg_errno(errp, errno, "Failed to get device interrupt info");
+ return -errno;
+ }
+ trace_qemu_vfio_msix_info_irqs(irq_info.count, *irq_count);
+ if (irq_info.count < *irq_count) {
+ error_setg(errp, "Not enough device interrupts available");
+ *irq_count = irq_info.count;
+ return -EOVERFLOW;
+ }
+ if (!(irq_info.flags & VFIO_IRQ_INFO_EVENTFD)) {
+ error_setg(errp, "Device interrupt doesn't support eventfd");
+ return -EINVAL;
+ }
+
+ irq_set_size = sizeof(*irq_set) + *irq_count * sizeof(int32_t);
+ irq_set = g_malloc0(irq_set_size);
+
+ /* Get to a known IRQ state */
+ *irq_set = (struct vfio_irq_set) {
+ .argsz = irq_set_size,
+ .flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER,
+ .index = VFIO_PCI_MSIX_IRQ_INDEX,
+ .start = 0,
+ .count = *irq_count,
+ };
+
+ for (unsigned i = 0; i < *irq_count; i++) {
+ ((int32_t *)&irq_set->data)[i] = -1; /* un-assigned: skip */
+ }
+ r = ioctl(s->device, VFIO_DEVICE_SET_IRQS, irq_set);
+ g_free(irq_set);
+ if (r < 0) {
+ error_setg_errno(errp, errno, "Failed to setup device interrupts");
+ return -errno;
+ } else if (r > 0) {
+ error_setg(errp, "Not enough device interrupts available");
+ *irq_count = r;
+ return -EOVERFLOW;
+ }
+ return 0;
+}
+
static int qemu_vfio_pci_read_config(QEMUVFIOState *s, void *buf,
int size, int ofs)
{
diff --git a/util/trace-events b/util/trace-events
index 3c36def9f30..ec93578b125 100644
--- a/util/trace-events
+++ b/util/trace-events
@@ -87,6 +87,7 @@ qemu_vfio_do_mapping(void *s, void *host, uint64_t iova,
size_t size) "s %p host
qemu_vfio_dma_map(void *s, void *host, size_t size, bool temporary, uint64_t
*iova) "s %p host %p size 0x%zx temporary %d &iova %p"
qemu_vfio_dma_mapped(void *s, void *host, uint64_t iova, size_t size) "s %p
host %p <-> iova 0x%"PRIx64" size 0x%zx"
qemu_vfio_dma_unmap(void *s, void *host) "s %p host %p"
+qemu_vfio_msix_info_irqs(uint32_t count, unsigned asked) "msix irqs %"PRIu32"
(asked: %u)"
qemu_vfio_iommu_iova_pgsizes(uint64_t iova_pgsizes) "iommu page size bitmask:
0x%08"PRIx64
qemu_vfio_pci_read_config(void *buf, int ofs, int size, uint64_t region_ofs,
uint64_t region_size) "read cfg ptr %p ofs 0x%x size %d (region ofs 0x%"PRIx64"
size %"PRId64")"
qemu_vfio_pci_write_config(void *buf, int ofs, int size, uint64_t region_ofs,
uint64_t region_size) "write cfg ptr %p ofs 0x%x size %d (region ofs
0x%"PRIx64" size %"PRId64")"
--
2.26.2
- [PATCH 08/16] util/vfio-helpers: Improve DMA trace events, (continued)
- [PATCH 08/16] util/vfio-helpers: Improve DMA trace events, Philippe Mathieu-Daudé, 2020/10/20
- [PATCH 09/16] util/vfio-helpers: Convert vfio_dump_mapping to trace events, Philippe Mathieu-Daudé, 2020/10/20
- [PATCH 10/16] util/vfio-helpers: Let qemu_vfio_dma_map() propagate Error, Philippe Mathieu-Daudé, 2020/10/20
- [PATCH 11/16] util/vfio-helpers: Let qemu_vfio_do_mapping() propagate Error, Philippe Mathieu-Daudé, 2020/10/20
- [PATCH 12/16] util/vfio-helpers: Let qemu_vfio_verify_mappings() use error_report(), Philippe Mathieu-Daudé, 2020/10/20
- [PATCH 13/16] util/vfio-helpers: Introduce qemu_vfio_pci_msix_init_irqs(),
Philippe Mathieu-Daudé <=
- [PATCH 15/16] block/nvme: Switch to using the MSIX API, Philippe Mathieu-Daudé, 2020/10/20
- [PATCH 14/16] util/vfio-helpers: Introduce qemu_vfio_pci_msix_set_irq(), Philippe Mathieu-Daudé, 2020/10/20
- [PATCH 16/16] util/vfio-helpers: Remove now unused qemu_vfio_pci_init_irq(), Philippe Mathieu-Daudé, 2020/10/20