> # Check if tools are available to build documentation.
> # version requirement). This will fail if sphinx-build is too old.
There is subtle error here, when sphinx_build not found, there is
SPHINX_ARGS should be [],
otherwise, latter place using
SPHINX_ARGS have not found sphinx_build will cause error by meson
..
>
> if not build_docs
> if sphinx_build_option != ''
> warning('@0@ exists but it is either too old or uses too old a Python version'.format(sphinx_build_option))
> endif
> if get_option('docs').enabled()
> error('Install a Python 3 version of python-sphinx')
> endif
> endif
>
>
>
> On 16/10/20 00:06, Yonggang Luo wrote:
> > Signed-off-by: Yonggang Luo <
luoyonggang@gmail.com>
> > ---
> > configure | 59 +++-------------------------------
> > docs/meson.build | 4 +--
> > meson.build | 60 +++++++++++++++++++++++++++++++----
> > meson_options.txt | 5 ++-
> > tests/qapi-schema/meson.build | 2 +-
> > 5 files changed, 64 insertions(+), 66 deletions(-)
> >
> > diff --git a/configure b/configure
> > index 1ce31f97b4..ff593a8542 100755
> > --- a/configure
> > +++ b/configure
> > @@ -297,7 +297,7 @@ brlapi=""
> > curl=""
> > iconv="auto"
> > curses="auto"
> > -docs=""
> > +docs="auto"
> > fdt="auto"
> > netmap="no"
> > sdl="auto"
> > @@ -822,15 +822,6 @@ do
> > fi
> > done
> >
> > -sphinx_build=
> > -for binary in sphinx-build-3 sphinx-build
> > -do
> > - if has "$binary"
> > - then
> > - sphinx_build=$(command -v "$binary")
> > - break
> > - fi
> > -done
> >
> > # Check for ancillary tools used in testing
> > genisoimage=
> > @@ -1226,9 +1217,9 @@ for opt do
> > ;;
> > --disable-crypto-afalg) crypto_afalg="no"
> > ;;
> > - --disable-docs) docs="no"
> > + --disable-docs) docs="disabled"
> > ;;
> > - --enable-docs) docs="yes"
> > + --enable-docs) docs="enabled"
> > ;;
> > --disable-vhost-net) vhost_net="no"
> > ;;
> > @@ -4413,45 +4404,6 @@ if check_include linux/btrfs.h ; then
> > btrfs=yes
> > fi
> >
> > -# If we're making warnings fatal, apply this to Sphinx runs as well
> > -sphinx_werror=""
> > -if test "$werror" = "yes"; then
> > - sphinx_werror="-W"
> > -fi
> > -
> > -# Check we have a new enough version of sphinx-build
> > -has_sphinx_build() {
> > - # This is a bit awkward but works: create a trivial document and
> > - # try to run it with our configuration file (which enforces a
> > - # version requirement). This will fail if either
> > - # sphinx-build doesn't exist at all or if it is too old.
> > - mkdir -p "$TMPDIR1/sphinx"
> > - touch "$TMPDIR1/sphinx/index.rst"
> > - "$sphinx_build" $sphinx_werror -c "$source_path/docs" \
> > - -b html "$TMPDIR1/sphinx" \
> > - "$TMPDIR1/sphinx/out" >> config.log 2>&1
> > -}
> > -
> > -# Check if tools are available to build documentation.
> > -if test "$docs" != "no" ; then
> > - if has_sphinx_build; then
> > - sphinx_ok=yes
> > - else
> > - sphinx_ok=no
> > - fi
> > - if test "$sphinx_ok" = "yes"; then
> > - docs=yes
> > - else
> > - if test "$docs" = "yes" ; then
> > - if has $sphinx_build && test "$sphinx_ok" != "yes"; then
> > - echo "Warning: $sphinx_build exists but it is either too old or uses too old a Python version" >&2
> > - fi
> > - feature_not_found "docs" "Install a Python 3 version of python-sphinx"
> > - fi
> > - docs=no
> > - fi
> > -fi
> > -
> > # Search for bswap_32 function
> > byteswap_h=no
> > cat > $TMPC << EOF
> > @@ -6087,9 +6039,6 @@ qemu_version=$(head $source_path/VERSION)
> > echo "PKGVERSION=$pkgversion" >>$config_host_mak
> > echo "SRC_PATH=$source_path" >> $config_host_mak
> > echo "TARGET_DIRS=$target_list" >> $config_host_mak
> > -if [ "$docs" = "yes" ] ; then
> > - echo "BUILD_DOCS=yes" >> $config_host_mak
> > -fi
> > if test "$modules" = "yes"; then
> > # $shacmd can generate a hash started with digit, which the compiler doesn't
> > # like as an symbol. So prefix it with an underscore
> > @@ -6794,7 +6743,6 @@ fi
> > echo "ROMS=$roms" >> $config_host_mak
> > echo "MAKE=$make" >> $config_host_mak
> > echo "PYTHON=$python" >> $config_host_mak
> > -echo "SPHINX_BUILD=$sphinx_build" >> $config_host_mak
> > echo "GENISOIMAGE=$genisoimage" >> $config_host_mak
> > echo "MESON=$meson" >> $config_host_mak
> > echo "CC=$cc" >> $config_host_mak
> > @@ -7076,6 +7024,7 @@ NINJA=${ninja:-$PWD/ninjatool} $meson setup \
> > -Dgettext=$gettext -Dxkbcommon=$xkbcommon -Du2f=$u2f \
> > -Dcapstone=$capstone -Dslirp=$slirp -Dfdt=$fdt \
> > -Diconv=$iconv -Dcurses=$curses \
> > + -Ddocs=$docs -Dsphinx_build=$sphinx_build \
> > $cross_arg \
> > "$PWD" "$source_path"
> >
> > diff --git a/docs/meson.build b/docs/meson.build
> > index 0340d489ac..f566809a6a 100644
> > --- a/docs/meson.build
> > +++ b/docs/meson.build
> > @@ -37,7 +37,7 @@ if build_docs
> > input: [files('conf.py'), files(manual / 'conf.py')],
> > depfile: manual + '.d',
> > depend_files: sphinx_extn_depends,
> > - command: [SPHINX_ARGS, '-Ddepfile=@DEPFILE@',
> > + command: SPHINX_ARGS + ['-Ddepfile=@DEPFILE@',
> > '-Ddepfile_stamp=@OUTPUT0@',
> > '-b', 'html', '-d', private_dir,
> > input_dir, output_dir])
> > @@ -59,7 +59,7 @@ if build_docs
> > input: this_manual,
> > install: build_docs,
> > install_dir: install_dirs,
> > - command: [SPHINX_ARGS, '-b', 'man', '-d', private_dir,
> > + command: SPHINX_ARGS + ['-b', 'man', '-d', private_dir,
> > input_dir, meson.current_build_dir()])
> > endif
> > endforeach
> > diff --git a/meson.build b/meson.build
> > index 8156df8b71..8940468208 100644
> > --- a/meson.build
> > +++ b/meson.build
> > @@ -17,7 +17,13 @@ cc = meson.get_compiler('c')
> > config_host = keyval.load(meson.current_build_dir() / 'config-host.mak')
> > enable_modules = 'CONFIG_MODULES' in config_host
> > enable_static = 'CONFIG_STATIC' in config_host
> > -build_docs = 'BUILD_DOCS' in config_host
> > +
> > +# Temporary directory used for files created while
> > +# configure runs. Since it is in the build directory
> > +# we can safely blow away any previous version of it
> > +# (and we need not jump through hoops to try to delete
> > +# it when configure exits.)
> > +tmpdir = meson.current_build_dir() / 'config-temp'
> >
> > if get_option('qemu_suffix').startswith('/')
> > error('qemu_suffix cannot start with a /')
> > @@ -1235,12 +1241,52 @@ foreach d : hx_headers
> > endforeach
> > genh += hxdep
> >
> > -SPHINX_ARGS = [config_host['SPHINX_BUILD'],
> > - '-Dversion=' + meson.project_version(),
> > - '-Drelease=' + config_host['PKGVERSION']]
> > +sphinx_build = not_found
> > +sphinx_build_option = get_option('sphinx_build')
> > +if sphinx_build_option == ''
> > + sphinx_build = find_program('sphinx-build', required: false)
> > +else
> > + sphinx_build = find_program(sphinx_build_option, required: false)
> > +endif
> >
> > +SPHINX_TEST_ARGS = []
> > +# If we're making warnings fatal, apply this to Sphinx runs as well
> > if get_option('werror')
> > - SPHINX_ARGS += [ '-W' ]
> > + SPHINX_TEST_ARGS += [ '-W' ]
> > +endif
> > +
> > +build_docs = false
> > +docs_option = get_option('docs')
> > +# Check if tools are available to build documentation.
> > +if sphinx_build.found() and not docs_option.disabled()
> > + # This is a bit awkward but works: create a trivial document and
> > + # try to run it with our configuration file (which enforces a
> > + # version requirement). This will fail if either
> > + # sphinx-build doesn't exist at all or if it is too old.
> > + run_command('mkdir', ['-p', tmpdir / 'sphinx'])
> > + run_command('touch', [tmpdir / 'sphinx/index.rst'])
> > + sphinx_build_test_out = run_command(sphinx_build, SPHINX_TEST_ARGS + [
> > + '-c', meson.current_source_dir() / 'docs',
> > + '-b', 'html', tmpdir / 'sphinx',
> > + tmpdir / 'sphinx/out'])
> > + if sphinx_build_test_out.returncode() == 0
> > + build_docs = true
> > + else
> > + if docs_option.enabled()
> > + if sphinx_build_option != ''
> > + warning('Warning: @0@ exists but it is either too old or uses too old a Python version'.format(sphinx_build_option))
> > + endif
> > + error('Warning: Install a Python 3 version of python-sphinx')
> > + endif
> > + # do not building docs
> > + endif
> > +endif
> > +
> > +SPHINX_ARGS = []
> > +if build_docs
> > + SPHINX_ARGS = [sphinx_build]
> > + SPHINX_ARGS += SPHINX_TEST_ARGS
> > + SPHINX_ARGS += ['-Dversion=' + meson.project_version(), '-Drelease=' + config_host['PKGVERSION']]
> > endif
> >
> > sphinx_extn_depends = [ meson.source_root() / 'docs/sphinx/depfile.py',
> > @@ -1918,7 +1964,7 @@ summary_info += {'QEMU_CFLAGS': config_host['QEMU_CFLAGS']}
> > summary_info += {'QEMU_LDFLAGS': config_host['QEMU_LDFLAGS']}
> > summary_info += {'make': config_host['MAKE']}
> > summary_info += {'python': '@0@ (version: @1@)'.format(python.full_path(), python.language_version())}
> > -summary_info += {'sphinx-build': config_host['SPHINX_BUILD']}
> > +summary_info += {'sphinx-build': sphinx_build.found()}
> > summary_info += {'genisoimage': config_host['GENISOIMAGE']}
> > # TODO: add back version
> > summary_info += {'slirp support': slirp_opt == 'disabled' ? false : slirp_opt}
> > @@ -1986,7 +2032,7 @@ if config_host.has_key('CONFIG_XEN_BACKEND')
> > summary_info += {'xen ctrl version': config_host['CONFIG_XEN_CTRL_INTERFACE_VERSION']}
> > endif
> > summary_info += {'brlapi support': config_host.has_key('CONFIG_BRLAPI')}
> > -summary_info += {'Documentation': config_host.has_key('BUILD_DOCS')}
> > +summary_info += {'Documentation': build_docs}
> > summary_info += {'PIE': get_option('b_pie')}
> > summary_info += {'vde support': config_host.has_key('CONFIG_VDE')}
> > summary_info += {'netmap support': config_host.has_key('CONFIG_NETMAP')}
> > diff --git a/meson_options.txt b/meson_options.txt
> > index e6cb1e589b..0e3fa7136b 100644
> > --- a/meson_options.txt
> > +++ b/meson_options.txt
> > @@ -1,8 +1,11 @@
> > option('qemu_suffix', type : 'string', value: 'qemu',
> > description: 'Suffix for QEMU data/modules/config directories (can be empty)')
> > +option('docs', type : 'feature', value : 'auto',
> > + description: 'Documentations build support')
> > option('docdir', type : 'string', value : 'doc',
> > description: 'Base directory for documentation installation (can be empty)')
> > -
> > +option('sphinx_build', type : 'string', value : '',
> > + description: 'Use specified sphinx-build [$sphinx_build] for building document (default to be empty)')
> > option('gettext', type : 'boolean', value : true,
> > description: 'Localization of the GTK+ user interface')
> > option('sparse', type : 'feature', value : 'auto',
> > diff --git a/tests/qapi-schema/meson.build b/tests/qapi-schema/meson.build
> > index 1f222a7a13..961b8367a9 100644
> > --- a/tests/qapi-schema/meson.build
> > +++ b/tests/qapi-schema/meson.build
> > @@ -237,7 +237,7 @@ qapi_doc_out = custom_target('QAPI rST doc',
> > # we want it to always really run the QAPI doc
> > # generation code. It also means we don't
> > # clutter up the build dir with the cache.
> > - command: [SPHINX_ARGS,
> > + command: SPHINX_ARGS + [
> > '-b', 'text', '-E',
> > '-c', meson.source_root() / 'docs',
> > '-D', 'master_doc=doc-good',
> >
>
--
此致
礼
罗勇刚
Yours
sincerely,
Yonggang Luo