[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH V13 6/9] target/mips: Add loongson-ext lsdc2 group of instruc
From: |
Huacai Chen |
Subject: |
Re: [PATCH V13 6/9] target/mips: Add loongson-ext lsdc2 group of instructions |
Date: |
Sun, 11 Oct 2020 11:02:46 +0800 |
Hi, Philippe,
On Sat, Oct 10, 2020 at 9:07 PM Philippe Mathieu-Daudé <f4bug@amsat.org> wrote:
>
> On 10/7/20 10:39 AM, Huacai Chen wrote:
> > From: Jiaxun Yang <jiaxun.yang@flygoat.com>
> >
> > LDC2/SDC2 opcodes have been rewritten as "load & store with offset"
> > group of instructions by loongson-ext ASE.
> >
> > This patch add implementation of these instructions:
> > gslbx: load 1 bytes to GPR
> > gslhx: load 2 bytes to GPR
> > gslwx: load 4 bytes to GPR
> > gsldx: load 8 bytes to GPR
> > gslwxc1: load 4 bytes to FPR
> > gsldxc1: load 8 bytes to FPR
> > gssbx: store 1 bytes from GPR
> > gsshx: store 2 bytes from GPR
> > gsswx: store 4 bytes from GPR
> > gssdx: store 8 bytes from GPR
> > gsswxc1: store 4 bytes from FPR
> > gssdxc1: store 8 bytes from FPR
> >
> > Details of Loongson-EXT is here:
> > https://github.com/FlyGoat/loongson-insn/blob/master/loongson-ext.md
> >
> > Signed-off-by: Huacai Chen <chenhc@lemote.com>
> > Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
>
> If this patch is from Jiaxun, Huacai's S-o-b should come *after*.
OK, I will do that.
>
> > ---
> > target/mips/translate.c | 179
> > ++++++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 179 insertions(+)
> >
> > diff --git a/target/mips/translate.c b/target/mips/translate.c
> > index 916b57f..4d42cfc 100644
> > --- a/target/mips/translate.c
> > +++ b/target/mips/translate.c
> > @@ -484,6 +484,24 @@ enum {
> > OPC_GSSDRC1 = 0x7 | OPC_GSSHFS,
> > };
> >
> > +/* Loongson EXT LDC2/SDC2 opcodes */
> > +#define MASK_LOONGSON_LSDC2(op) (MASK_OP_MAJOR(op) | (op & 0x7))
> > +
> > +enum {
> > + OPC_GSLBX = 0x0 | OPC_LDC2,
> > + OPC_GSLHX = 0x1 | OPC_LDC2,
> > + OPC_GSLWX = 0x2 | OPC_LDC2,
> > + OPC_GSLDX = 0x3 | OPC_LDC2,
> > + OPC_GSLWXC1 = 0x6 | OPC_LDC2,
> > + OPC_GSLDXC1 = 0x7 | OPC_LDC2,
> > + OPC_GSSBX = 0x0 | OPC_SDC2,
> > + OPC_GSSHX = 0x1 | OPC_SDC2,
> > + OPC_GSSWX = 0x2 | OPC_SDC2,
> > + OPC_GSSDX = 0x3 | OPC_SDC2,
> > + OPC_GSSWXC1 = 0x6 | OPC_SDC2,
> > + OPC_GSSDXC1 = 0x7 | OPC_SDC2,
> > +};
> > +
> > /* BSHFL opcodes */
> > #define MASK_BSHFL(op) (MASK_SPECIAL3(op) | (op & (0x1F <<
> > 6)))
> >
> > @@ -6172,6 +6190,165 @@ static void gen_loongson_lswc2(DisasContext *ctx,
> > int rt,
> > tcg_temp_free(t0);
> > }
> >
> > +/* Loongson EXT LDC2/SDC2 */
> > +static void gen_loongson_lsdc2(DisasContext *ctx, int rt,
> > + int rs, int rd)
>
> Alignment off (various occurences in this series).
OK, thanks.
>
> > +{
> > + int offset = (int8_t)(ctx->opcode >> 3);
>
> Please use sextract32() which is easier to read:
>
> int32_t offset = sextract32(ctx->opcode, 3, 8);
OK, thanks.
>
> > + uint32_t opc = MASK_LOONGSON_LSDC2(ctx->opcode);
> > + TCGv t0, t1;
> > + TCGv_i32 fp0;
> > +
> > + /* Pre-conditions */
> > + switch (opc) {
> > + case OPC_GSLBX:
> > + case OPC_GSLHX:
> > + case OPC_GSLWX:
> > + case OPC_GSLDX:
> > + /* prefetch, implement as NOP */
> > + if (rt == 0) {
> > + return;
> > + }
> > + break;
> > + case OPC_GSSBX:
> > + case OPC_GSSHX:
> > + case OPC_GSSWX:
> > + case OPC_GSSDX:
> > + break;
> > + case OPC_GSLWXC1:
> > +#if defined(TARGET_MIPS64)
> > + case OPC_GSLDXC1:
> > +#endif
> > + check_cp1_enabled(ctx);
> > + /* prefetch, implement as NOP */
> > + if (rt == 0) {
> > + return;
> > + }
> > + break;
> > + case OPC_GSSWXC1:
> > +#if defined(TARGET_MIPS64)
> > + case OPC_GSSDXC1:
> > +#endif
> > + check_cp1_enabled(ctx);
> > + break;
> > + default:
> > + MIPS_INVAL("loongson_lsdc2");
> > + generate_exception_end(ctx, EXCP_RI);
> > + return;
> > + break;
> > + }
> > +
> > + t0 = tcg_temp_new();
> > +
> > + gen_base_offset_addr(ctx, t0, rs, offset);
> > + gen_op_addr_add(ctx, t0, cpu_gpr[rd], t0);
> > +
> > + switch (opc) {
> > + case OPC_GSLBX:
> > + tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_SB);
> > + gen_store_gpr(t0, rt);
> > + break;
> > + case OPC_GSLHX:
> > + tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_TESW |
> > + ctx->default_tcg_memop_mask);
>
> Do Loongson EXT plan to support unaligned accesses?
Not support in hardware, and Linux kernel emulate the unaligned cases.
>
> > + gen_store_gpr(t0, rt);
> > + break;
> > + case OPC_GSLWX:
> > + gen_base_offset_addr(ctx, t0, rs, offset);
> > + if (rd) {
> > + gen_op_addr_add(ctx, t0, cpu_gpr[rd], t0);
> > + }
> > + tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_TESL |
> > + ctx->default_tcg_memop_mask);
> > + gen_store_gpr(t0, rt);
> > + break;
> > +#if defined(TARGET_MIPS64)
> > + case OPC_GSLDX:
> > + gen_base_offset_addr(ctx, t0, rs, offset);
> > + if (rd) {
> > + gen_op_addr_add(ctx, t0, cpu_gpr[rd], t0);
> > + }
> > + tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_TEQ |
> > + ctx->default_tcg_memop_mask);
> > + gen_store_gpr(t0, rt);
> > + break;
> > +#endif
> > + case OPC_GSLWXC1:
> > + check_cp1_enabled(ctx);
> > + gen_base_offset_addr(ctx, t0, rs, offset);
> > + if (rd) {
> > + gen_op_addr_add(ctx, t0, cpu_gpr[rd], t0);
> > + }
> > + fp0 = tcg_temp_new_i32();
> > + tcg_gen_qemu_ld_i32(fp0, t0, ctx->mem_idx, MO_TESL |
> > + ctx->default_tcg_memop_mask);
> > + gen_store_fpr32(ctx, fp0, rt);
> > + tcg_temp_free_i32(fp0);
> > + break;
> > +#if defined(TARGET_MIPS64)
> > + case OPC_GSLDXC1:
> > + check_cp1_enabled(ctx);
> > + gen_base_offset_addr(ctx, t0, rs, offset);
> > + if (rd) {
> > + gen_op_addr_add(ctx, t0, cpu_gpr[rd], t0);
> > + }
> > + tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_TEQ |
> > + ctx->default_tcg_memop_mask);
> > + gen_store_fpr64(ctx, t0, rt);
> > + break;
> > +#endif
> > + case OPC_GSSBX:
> > + t1 = tcg_temp_new();
> > + gen_load_gpr(t1, rt);
> > + tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_SB);
> > + tcg_temp_free(t1);
> > + break;
> > + case OPC_GSSHX:
> > + t1 = tcg_temp_new();
> > + gen_load_gpr(t1, rt);
> > + tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_TEUW |
> > + ctx->default_tcg_memop_mask);
> > + tcg_temp_free(t1);
> > + break;
> > + case OPC_GSSWX:
> > + t1 = tcg_temp_new();
> > + gen_load_gpr(t1, rt);
> > + tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_TEUL |
> > + ctx->default_tcg_memop_mask);
> > + tcg_temp_free(t1);
> > + break;
> > +#if defined(TARGET_MIPS64)
> > + case OPC_GSSDX:
> > + t1 = tcg_temp_new();
> > + gen_load_gpr(t1, rt);
> > + tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_TEQ |
> > + ctx->default_tcg_memop_mask);
> > + tcg_temp_free(t1);
> > + break;
> > +#endif
> > + case OPC_GSSWXC1:
> > + fp0 = tcg_temp_new_i32();
> > + gen_load_fpr32(ctx, fp0, rt);
> > + tcg_gen_qemu_st_i32(fp0, t0, ctx->mem_idx, MO_TEUL |
> > + ctx->default_tcg_memop_mask);
> > + tcg_temp_free_i32(fp0);
> > + break;
> > +#if defined(TARGET_MIPS64)
> > + case OPC_GSSDXC1:
> > + t1 = tcg_temp_new();
> > + gen_load_fpr64(ctx, t1, rt);
> > + tcg_gen_qemu_st_i64(t1, t0, ctx->mem_idx, MO_TEQ |
> > + ctx->default_tcg_memop_mask);
> > + tcg_temp_free(t1);
> > + break;
> > +#endif
> > + default:
> > + break;
> > + }
> > +
> > + tcg_temp_free(t0);
> > +}
> > +
> > /* Traps */
> > static void gen_trap(DisasContext *ctx, uint32_t opc,
> > int rs, int rt, int16_t imm)
> > @@ -31055,6 +31232,8 @@ static void decode_opc(CPUMIPSState *env,
> > DisasContext *ctx)
> > /* OPC_JIC, OPC_JIALC */
> > gen_compute_compact_branch(ctx, op, 0, rt, imm);
> > }
> > + } else if (ctx->insn_flags & ASE_LEXT) {
> > + gen_loongson_lsdc2(ctx, rt, rs, rd);
> > } else {
> > /* OPC_LWC2, OPC_SWC2 */
> > /* COP2: Not implemented. */
> >
Huacai
- Re: [PATCH V13 1/9] linux-headers: Update MIPS KVM type defintition, (continued)
- [PATCH V13 2/9] meson.build: Re-enable KVM support for MIPS, Huacai Chen, 2020/10/07
- [PATCH V13 3/9] target/mips: Fix PageMask with variable page size, Huacai Chen, 2020/10/07
- [PATCH V13 4/9] target/mips: Add loongson-ext lswc2 group of instructions (Part 1), Huacai Chen, 2020/10/07
- [PATCH V13 5/9] target/mips: Add loongson-ext lswc2 group of instructions (Part 2), Huacai Chen, 2020/10/07
- [PATCH V13 6/9] target/mips: Add loongson-ext lsdc2 group of instructions, Huacai Chen, 2020/10/07
[PATCH V13 7/9] hw/mips: Implement fw_cfg_arch_key_name(), Huacai Chen, 2020/10/07
[PATCH V13 8/9] hw/mips: Add Loongson-3 machine support, Huacai Chen, 2020/10/07