qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [External] Re: [PATCH 1/2] hw/misc: add an EMC141{3, 4} device model


From: John Wang
Subject: Re: [External] Re: [PATCH 1/2] hw/misc: add an EMC141{3, 4} device model
Date: Thu, 8 Oct 2020 10:21:02 +0800

On Thu, Oct 1, 2020 at 11:04 PM Cédric Le Goater <clg@kaod.org> wrote:
>
> Hello,
>
> On 9/29/20 7:53 AM, John Wang wrote:
> > Largely inspired by the TMP423 temperature sensor, here is a model for
>
> It's a TMP421 temperature sensor

Will fix

>
> > the EMC1413 temperature sensors.
> >
> > Specs can be found here :
> >   https://pdf1.alldatasheet.com/datasheet-pdf/view/533713/SMSC/EMC1413.html
>
>
> Have you tested it under a current Linux kernel ?

Yes, I tested it, it works well.
>
> > Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
> > ---
> >  hw/arm/Kconfig      |   1 +
> >  hw/misc/Kconfig     |   4 +
> >  hw/misc/emc1413.c   | 309 ++++++++++++++++++++++++++++++++++++++++++++
> >  hw/misc/meson.build |   1 +
> >  4 files changed, 315 insertions(+)
> >  create mode 100644 hw/misc/emc1413.c
> >
> > diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> > index f303c6bead..8801ada145 100644
> > --- a/hw/arm/Kconfig
> > +++ b/hw/arm/Kconfig
> > @@ -402,6 +402,7 @@ config ASPEED_SOC
> >      select SSI_M25P80
> >      select TMP105
> >      select TMP421
> > +    select EMC1413
> >      select UNIMP
> >
> >  config MPS2
> > diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
> > index 3185456110..91badf2d4d 100644
> > --- a/hw/misc/Kconfig
> > +++ b/hw/misc/Kconfig
> > @@ -13,6 +13,10 @@ config TMP421
> >      bool
> >      depends on I2C
> >
> > +config EMC1413
> > +    bool
> > +    depends on I2C
> > +
> >  config ISA_DEBUG
> >      bool
> >      depends on ISA_BUS
> > diff --git a/hw/misc/emc1413.c b/hw/misc/emc1413.c
> > new file mode 100644
> > index 0000000000..2430c3f074
> > --- /dev/null
> > +++ b/hw/misc/emc1413.c
> > @@ -0,0 +1,309 @@
> > +/*
> > + * SMSC EMC1413 temperature sensor.
> > + *
> > + * Copyright (c) 2020 Bytedance Corporation
> > + * Written by John Wang <wangzhiqiang.bj@bytedance.com>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation; either version 2 or
> > + * (at your option) version 3 of the License.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along
> > + * with this program; if not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "hw/i2c/i2c.h"
> > +#include "migration/vmstate.h"
> > +#include "qapi/error.h"
> > +#include "qapi/visitor.h"
> > +#include "qemu/module.h"
> > +#include "qom/object.h"
> > +
> > +#define DEVICE_ID_REG                    0xfd
> > +#define MANUFACTURER_ID_REG              0xfe
> > +#define REVISION_REG                     0xff
> > +#define EMC1413_DEVICE_ID                0x21
> > +#define EMC1414_DEVICE_ID                0x25
> > +
> > +typedef struct DeviceInfo {
> > +    uint8_t model;
> > +    const char *name;
> > +} DeviceInfo;
> > +
> > +static const DeviceInfo devices[] = {
> > +    { EMC1413_DEVICE_ID, "emc1413" },
> > +    { EMC1414_DEVICE_ID, "emc1414" },
> > +};
> >
>
> DeviceInfo is a bit redundant with EMC1413Class. We could define all
> the attributes under the class.

yes, will remove this

>
> > +struct EMC1413State {
> > +    I2CSlave i2c;
> > +    uint8_t temperature[4];
> > +    uint8_t min[4];
> > +    uint8_t max[4];
> > +    uint8_t len;
> > +    uint8_t data;
> > +    uint8_t pointer;
> > +
> > +};
> > +
> > +struct EMC1413Class {
> > +    I2CSlaveClass parent_class;
> > +    DeviceInfo *dev;
> > +};
> > +
> > +#define TYPE_EMC1413 "emc1413-generic"
> > +OBJECT_DECLARE_TYPE(EMC1413State, EMC1413Class, EMC1413)
> > +
> > +
> > +/* the EMC1413 registers */
> > +#define EMC1413_TEMP_HIGH0               0x00
> > +#define EMC1413_TEMP_HIGH1               0x01
> > +#define EMC1413_TEMP_HIGH2               0x23
> > +#define EMC1413_TEMP_HIGH3               0x2a
> > +#define EMC1413_TEMP_MAX_HIGH0           0x05
> > +#define EMC1413_TEMP_MIN_HIGH0           0x06
> > +#define EMC1413_TEMP_MAX_HIGH1           0x07
> > +#define EMC1413_TEMP_MIN_HIGH1           0x08
> > +#define EMC1413_TEMP_MAX_HIGH2           0x15
> > +#define EMC1413_TEMP_MIN_HIGH2           0x16
> > +#define EMC1413_TEMP_MAX_HIGH3           0x2c
> > +#define EMC1413_TEMP_MIN_HIGH3           0x2d
>
> There are much more and it might not be necessary to model
> them all. Do we care about the status or config reg ?

I think we don't care about them. The linux driver doesn't care about
`config reg`,
as for `status reg`, in our project (openbmc) we don't care about it.

>
> > +static void emc1413_get_temperature(Object *obj, Visitor *v, const char 
> > *name,
> > +                                   void *opaque, Error **errp)
> > +{
> > +    EMC1413State *s = EMC1413(obj);
> > +    int64_t value;
> > +    int tempid;
> > +
> > +    if (sscanf(name, "temperature%d", &tempid) != 1) {
> > +        error_setg(errp, "error reading %s: %s", name, g_strerror(errno));
> > +        return;
> > +    }
> > +
> > +    if (tempid >= 4 || tempid < 0) {
> > +        error_setg(errp, "error reading %s", name);
> > +        return;
> > +    }
> > +
> > +    value = s->temperature[tempid] * 1000;
> > +
> > +    visit_type_int(v, name, &value, errp);
> > +}
> > +
> > +static void emc1413_set_temperature(Object *obj, Visitor *v, const char 
> > *name,
> > +                                   void *opaque, Error **errp)
> > +{
> > +    EMC1413State *s = EMC1413(obj);
> > +    int64_t temp;
> > +    int tempid;
> > +
> > +    if (!visit_type_int(v, name, &temp, errp)) {
> > +        return;
> > +    }
> > +
> > +    if (sscanf(name, "temperature%d", &tempid) != 1) {
> > +        error_setg(errp, "error reading %s: %s", name, g_strerror(errno));
> > +        return;
> > +    }
> > +
> > +    if (tempid >= 4 || tempid < 0) {
> > +        error_setg(errp, "error reading %s", name);
> > +        return;
> > +    }
> > +
> > +    s->temperature[tempid] = temp / 1000;
> > +}
> > +
> > +struct emc1413_reg {
> > +    uint8_t addr;
> > +    uint8_t *data;
> > +};
> > +
> > +static void emc1413_read(EMC1413State *s)
> > +{
> > +    EMC1413Class *sc = EMC1413_GET_CLASS(s);
> > +    uint8_t smsc_manufacturer_id = 0x5d;
> > +    uint8_t revision = 0x04;
> > +    struct emc1413_reg emc1413_regs[] = {
> > +        {DEVICE_ID_REG, &sc->dev->model},
> > +        {MANUFACTURER_ID_REG, &smsc_manufacturer_id},
> > +        {REVISION_REG, &revision},
>
> These attributes belong to the DeviceInfo structure or EMC1413Class if you
> decide to remove DeviceInfo.

yes

>
> > +        {EMC1413_TEMP_HIGH0, &s->temperature[0]},
> > +        {EMC1413_TEMP_HIGH1, &s->temperature[1]},
> > +        {EMC1413_TEMP_HIGH2, &s->temperature[2]},
> > +        {EMC1413_TEMP_HIGH3, &s->temperature[3]},
> > +        {EMC1413_TEMP_MAX_HIGH0, &s->max[0]},
> > +        {EMC1413_TEMP_MAX_HIGH1, &s->max[1]},
> > +        {EMC1413_TEMP_MAX_HIGH2, &s->max[2]},
> > +        {EMC1413_TEMP_MAX_HIGH3, &s->max[3]},
> > +        {EMC1413_TEMP_MIN_HIGH0, &s->min[0]},
> > +        {EMC1413_TEMP_MIN_HIGH1, &s->min[1]},
> > +        {EMC1413_TEMP_MIN_HIGH2, &s->min[2]},
> > +        {EMC1413_TEMP_MIN_HIGH3, &s->min[3]},
> > +    };
> > +    size_t i;
> > +    for (i = 0; i < ARRAY_SIZE(emc1413_regs); i++) {
> > +        if (emc1413_regs[i].addr == s->pointer) {
> > +            s->data = *(emc1413_regs[i].data);
> > +            return;
> > +        }
> > +    }
> > +}
> > +
> > +static void emc1413_write(EMC1413State *s)
> > +{
> > +    struct emc1413_reg emc1413_regs[] = {
> > +        {EMC1413_TEMP_MAX_HIGH0, &s->max[0]},
> > +        {EMC1413_TEMP_MAX_HIGH1, &s->max[1]},
> > +        {EMC1413_TEMP_MAX_HIGH2, &s->max[2]},
> > +        {EMC1413_TEMP_MAX_HIGH3, &s->max[3]},
> > +        {EMC1413_TEMP_MIN_HIGH0, &s->min[0]},
> > +        {EMC1413_TEMP_MIN_HIGH1, &s->min[1]},
> > +        {EMC1413_TEMP_MIN_HIGH2, &s->min[2]},
> > +        {EMC1413_TEMP_MIN_HIGH3, &s->min[3]},
> > +    };
> > +    size_t i;
> > +    for (i = 0; i < ARRAY_SIZE(emc1413_regs); i++) {
> > +        if (emc1413_regs[i].addr == s->pointer) {
> > +            *(emc1413_regs[i].data) = s->data;
> > +            return;
> > +        }
> > +    }
> > +}
> > +
> > +static uint8_t emc1413_rx(I2CSlave *i2c)
> > +{
> > +    EMC1413State *s = EMC1413(i2c);
> > +
> > +    if (s->len == 0) {
> > +        s->len++;
> > +        return s->data;
> > +    } else {
> > +        return 0xff;
> > +    }
> > +}
> > +
> > +static int emc1413_tx(I2CSlave *i2c, uint8_t data)
> > +{
> > +    EMC1413State *s = EMC1413(i2c);
> > +
> > +    if (s->len == 0) {
> > +        /* first byte is the reg pointer */
> > +        s->pointer = data;
> > +        s->len++;
> > +    } else if (s->len == 1) {
> > +        s->data = data;
> > +        emc1413_write(s);
> > +    }
> > +
> > +    return 0;
> > +}
> > +
> > +static int emc1413_event(I2CSlave *i2c, enum i2c_event event)
> > +{
> > +    EMC1413State *s = EMC1413(i2c);
> > +
> > +    if (event == I2C_START_RECV) {
> > +        emc1413_read(s);
> > +    }
> > +
> > +    s->len = 0;
> > +    return 0;
> > +}
> > +
> > +static const VMStateDescription vmstate_emc1413 = {
> > +    .name = "EMC1413",
> > +    .version_id = 0,
> > +    .minimum_version_id = 0,
> > +    .fields = (VMStateField[]) {
> > +        VMSTATE_UINT8(len, EMC1413State),
> > +        VMSTATE_UINT8(data, EMC1413State),
> > +        VMSTATE_UINT8(pointer, EMC1413State),
> > +        VMSTATE_UINT8_ARRAY(temperature, EMC1413State, 4),
> > +        VMSTATE_I2C_SLAVE(i2c, EMC1413State),
> > +        VMSTATE_END_OF_LIST()
> > +    }
> > +};
> > +
> > +static void emc1413_reset(I2CSlave *i2c)
> > +{
> > +    EMC1413State *s = EMC1413(i2c);
> > +
> > +    memset(s->temperature, 0, sizeof(s->temperature));
> > +    memset(s->min, 0, sizeof(s->min));
> > +    memset(s->max, 0x55, sizeof(s->max));
> > +    s->pointer = 0;
> > +    s->len = 0;
> > +}
> > +
> > +static void emc1413_realize(DeviceState *dev, Error **errp)
> > +{
> > +    EMC1413State *s = EMC1413(dev);
> > +
> > +    emc1413_reset(&s->i2c);
> > +}
> > +
> > +static void emc1413_initfn(Object *obj)
> > +{
> > +    object_property_add(obj, "temperature0", "int",
> > +                        emc1413_get_temperature,
> > +                        emc1413_set_temperature, NULL, NULL);
> > +    object_property_add(obj, "temperature1", "int",
> > +                        emc1413_get_temperature,
> > +                        emc1413_set_temperature, NULL, NULL);
> > +    object_property_add(obj, "temperature2", "int",
> > +                        emc1413_get_temperature,
> > +                        emc1413_set_temperature, NULL, NULL);
> > +    object_property_add(obj, "temperature3", "int",
> > +                        emc1413_get_temperature,
> > +                        emc1413_set_temperature, NULL, NULL);
> > +}
> > +
> > +static void emc1413_class_init(ObjectClass *klass, void *data)
> > +{
> > +    DeviceClass *dc = DEVICE_CLASS(klass);
> > +    I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
> > +    EMC1413Class *sc = EMC1413_CLASS(klass);
> > +
> > +    dc->realize = emc1413_realize;
> > +    k->event = emc1413_event;
> > +    k->recv = emc1413_rx;
> > +    k->send = emc1413_tx;
> > +    dc->vmsd = &vmstate_emc1413;
> > +    sc->dev = (DeviceInfo *) data;
> > +}
> > +
> > +static const TypeInfo emc1413_info = {
> > +    .name          = TYPE_EMC1413,
> > +    .parent        = TYPE_I2C_SLAVE,
> > +    .instance_size = sizeof(EMC1413State),
> > +    .class_size    = sizeof(EMC1413Class),
> > +    .instance_init = emc1413_initfn,
> > +    .abstract      = true,
> > +};
> > +
> > +static void emc1413_register_types(void)
> > +{
> > +    int i;
> > +
> > +    type_register_static(&emc1413_info);
> > +    for (i = 0; i < ARRAY_SIZE(devices); ++i) {
> > +        TypeInfo ti = {
> > +            .name       = devices[i].name,
> > +            .parent     = TYPE_EMC1413,
> > +            .class_init = emc1413_class_init,
> > +            .class_data = (void *) &devices[i],
> > +        };
> > +        type_register(&ti);
> > +    }
> > +}
> > +
> > +type_init(emc1413_register_types)
> > diff --git a/hw/misc/meson.build b/hw/misc/meson.build
> > index 793d45b1dc..08821c72ba 100644
> > --- a/hw/misc/meson.build
> > +++ b/hw/misc/meson.build
> > @@ -9,6 +9,7 @@ softmmu_ss.add(when: 'CONFIG_PCI_TESTDEV', if_true: 
> > files('pci-testdev.c'))
> >  softmmu_ss.add(when: 'CONFIG_SGA', if_true: files('sga.c'))
> >  softmmu_ss.add(when: 'CONFIG_TMP105', if_true: files('tmp105.c'))
> >  softmmu_ss.add(when: 'CONFIG_TMP421', if_true: files('tmp421.c'))
> > +softmmu_ss.add(when: 'CONFIG_EMC1413', if_true: files('emc1413.c'))
> >  softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c'))
> >  softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c'))
> >
> >
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]