[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v4 0/7] Make hcd-xhci independent of pci hooks
From: |
Sai Pavan Boddu |
Subject: |
[PATCH v4 0/7] Make hcd-xhci independent of pci hooks |
Date: |
Sat, 29 Aug 2020 00:49:33 +0530 |
This patch series attempts to make 'hcd-xhci' an independent model so
it can be used by both pci and system-bus interface.
Changes for V2:
Make XHCIState non-qom
Use container_of functions for retriving pci device instance
Initialize the AddressSpace pointer in PATCH 1/3 itself
Changes for V3:
Convert XHCIState to TYPE_DEVICE and register as a child of XHCIPciState.
Changes for V4:
Add DWC3 usb controller
Add versal, usb2-reg module
Connect sysbus xhci to versal virt board
Sai Pavan Boddu (5):
usb/hcd-xhci: Make dma read/writes hooks pci free
usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c
usb/hcd-xhci: Split pci wrapper for xhci base model
usb: hcd-xhci-sysbus: Attach xhci to sysbus device
misc: Add versal-usb2-regs module
Vikram Garhwal (2):
usb: Add DWC3 model
Versal: Connect DWC3 controller with virt-versal
hw/arm/xlnx-versal-virt.c | 59 ++++
hw/arm/xlnx-versal.c | 38 ++
hw/misc/Makefile.objs | 1 +
hw/misc/xlnx-versal-usb2-regs.c | 224 ++++++++++++
hw/usb/Kconfig | 11 +
hw/usb/Makefile.objs | 3 +
hw/usb/hcd-dwc3.c | 606 ++++++++++++++++++++++++++++++++
hw/usb/hcd-xhci-nec.c | 18 +-
hw/usb/hcd-xhci-pci.c | 244 +++++++++++++
hw/usb/hcd-xhci-pci.h | 45 +++
hw/usb/hcd-xhci-sysbus.c | 99 ++++++
hw/usb/hcd-xhci-sysbus.h | 32 ++
hw/usb/hcd-xhci.c | 260 +++-----------
hw/usb/hcd-xhci.h | 22 +-
include/hw/arm/xlnx-versal.h | 14 +
include/hw/misc/xlnx-versal-usb2-regs.h | 43 +++
include/hw/usb/hcd-dwc3.h | 58 +++
17 files changed, 1552 insertions(+), 225 deletions(-)
create mode 100644 hw/misc/xlnx-versal-usb2-regs.c
create mode 100644 hw/usb/hcd-dwc3.c
create mode 100644 hw/usb/hcd-xhci-pci.c
create mode 100644 hw/usb/hcd-xhci-pci.h
create mode 100644 hw/usb/hcd-xhci-sysbus.c
create mode 100644 hw/usb/hcd-xhci-sysbus.h
create mode 100644 include/hw/misc/xlnx-versal-usb2-regs.h
create mode 100644 include/hw/usb/hcd-dwc3.h
--
2.7.4
- [PATCH v4 0/7] Make hcd-xhci independent of pci hooks,
Sai Pavan Boddu <=
- [PATCH v4 5/7] misc: Add versal-usb2-regs module, Sai Pavan Boddu, 2020/08/28
- [PATCH v4 7/7] Versal: Connect DWC3 controller with virt-versal, Sai Pavan Boddu, 2020/08/28
- [PATCH v4 6/7] usb: Add DWC3 model, Sai Pavan Boddu, 2020/08/28
- [PATCH v4 3/7] usb/hcd-xhci: Split pci wrapper for xhci base model, Sai Pavan Boddu, 2020/08/28
- [PATCH v4 1/7] usb/hcd-xhci: Make dma read/writes hooks pci free, Sai Pavan Boddu, 2020/08/28
- [PATCH v4 4/7] usb: hcd-xhci-sysbus: Attach xhci to sysbus device, Sai Pavan Boddu, 2020/08/28
- [PATCH v4 2/7] usb/hcd-xhci: Move qemu-xhci device to hcd-xhci-pci.c, Sai Pavan Boddu, 2020/08/28