[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 3/3] target/nios2: Use gen_io_start around wrctl instruction
From: |
Richard Henderson |
Subject: |
Re: [PATCH 3/3] target/nios2: Use gen_io_start around wrctl instruction |
Date: |
Thu, 2 Jul 2020 11:53:34 -0700 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.8.0 |
On 6/29/20 9:05 AM, Wentong Wu wrote:
> wrctl instruction on nios2 target will cause checking cpu
> interrupt but tcg_handle_interrupt() will call cpu_abort()
> if the CPU gets an interrupt while it's not in 'can do IO'
> state, so add gen_io_start around wrctl instruction. Also
> at the same time, end the onging TB with DISAS_UPDATE.
>
> Signed-off-by: Wentong Wu <wentong.wu@intel.com>
> ---
> target/nios2/translate.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/target/nios2/translate.c b/target/nios2/translate.c
> index 83c10eb2..51347ada 100644
> --- a/target/nios2/translate.c
> +++ b/target/nios2/translate.c
> @@ -32,6 +32,7 @@
> #include "exec/cpu_ldst.h"
> #include "exec/translator.h"
> #include "qemu/qemu-print.h"
> +#include "exec/gen-icount.h"
>
> /* is_jmp field values */
> #define DISAS_JUMP DISAS_TARGET_0 /* only pc was modified dynamically */
> @@ -518,7 +519,11 @@ static void wrctl(DisasContext *dc, uint32_t code,
> uint32_t flags)
> /* If interrupts were enabled using WRCTL, trigger them. */
> #if !defined(CONFIG_USER_ONLY)
> if ((instr.imm5 + CR_BASE) == CR_STATUS) {
> + if (tb_cflags(dc->tb) & CF_USE_ICOUNT) {
> + gen_io_start();
> + }
> gen_helper_check_interrupts(dc->cpu_env);
> + dc->is_jmp = DISAS_UPDATE;
> }
> #endif
This isn't right. Not so much the gen_io_start portion, but the entire
existence of helper_check_interrupt.
The correct way to acknowledge interrupts after changing an interrupt mask bit
is to exit the TB back to the cpu main loop.
Which you are doing here with DISAS_UPDATE, so that part is fine. (Although
you could merge that into the switch statement above.)
Looking at nios_pic_cpu_handler, there are two other bugs:
1) Get rid of env->irq_pending and use cpu_interrupt/cpu_reset_interrupt
instead.
2) Do not check env->regs[CR_STATUS] & CR_STATUS_PIE. That variable does not
belong to the pic and should not be checked there. The check belongs in
nios2_cpu_exec_interrupt, and is in fact already there.
r~
- RE: [PATCH 3/3] target/nios2: Use gen_io_start around wrctl instruction, Wu, Wentong, 2020/07/01
- Re: [PATCH 3/3] target/nios2: Use gen_io_start around wrctl instruction,
Richard Henderson <=
- RE: [PATCH 3/3] target/nios2: Use gen_io_start around wrctl instruction, Wu, Wentong, 2020/07/03
- RE: [PATCH 3/3] target/nios2: Use gen_io_start around wrctl instruction, Wu, Wentong, 2020/07/05
- RE: [PATCH 3/3] target/nios2: Use gen_io_start around wrctl instruction, Wu, Wentong, 2020/07/05
- Re: [PATCH 3/3] target/nios2: Use gen_io_start around wrctl instruction, Peter Maydell, 2020/07/05
- RE: [PATCH 3/3] target/nios2: Use gen_io_start around wrctl instruction, Wu, Wentong, 2020/07/05
RE: [PATCH 3/3] target/nios2: Use gen_io_start around wrctl instruction, Wu, Wentong, 2020/07/03
Re: [PATCH 3/3] target/nios2: Use gen_io_start around wrctl instruction, Peter Maydell, 2020/07/05