Make variables local to the block they are used in to make it clearer
which operation they are needed for.
Signed-off-by: BALATON Zoltan <address@hidden>
---
hw/display/sm501.c | 31 ++++++++++++++++---------------
1 file changed, 16 insertions(+), 15 deletions(-)
diff --git a/hw/display/sm501.c b/hw/display/sm501.c
index 97660090bb..5ed57703d8 100644
--- a/hw/display/sm501.c
+++ b/hw/display/sm501.c
@@ -699,28 +699,19 @@ static inline void hwc_invalidate(SM501State *s, int crt)
static void sm501_2d_operation(SM501State *s)
{
- /* obtain operation parameters */
int cmd = (s->twoD_control >> 16) & 0x1F;
int rtl = s->twoD_control & BIT(27);
- int src_x = (s->twoD_source >> 16) & 0x01FFF;
- int src_y = s->twoD_source & 0xFFFF;
- int dst_x = (s->twoD_destination >> 16) & 0x01FFF;
- int dst_y = s->twoD_destination & 0xFFFF;
- int width = (s->twoD_dimension >> 16) & 0x1FFF;
- int height = s->twoD_dimension & 0xFFFF;
- uint32_t color = s->twoD_foreground;
int format = (s->twoD_stretch >> 20) & 0x3;
int rop_mode = (s->twoD_control >> 15) & 0x1; /* 1 for rop2, else rop3 */
/* 1 if rop2 source is the pattern, otherwise the source is the bitmap */
int rop2_source_is_pattern = (s->twoD_control >> 14) & 0x1;
int rop = s->twoD_control & 0xFF;
- uint32_t src_base = s->twoD_source_base & 0x03FFFFFF;
+ int dst_x = (s->twoD_destination >> 16) & 0x01FFF;
+ int dst_y = s->twoD_destination & 0xFFFF;
+ int width = (s->twoD_dimension >> 16) & 0x1FFF;
+ int height = s->twoD_dimension & 0xFFFF;
uint32_t dst_base = s->twoD_destination_base & 0x03FFFFFF;
-
- /* get frame buffer info */
- uint8_t *src = s->local_mem + src_base;
uint8_t *dst = s->local_mem + dst_base;
- int src_pitch = s->twoD_pitch & 0x1FFF;
int dst_pitch = (s->twoD_pitch >> 16) & 0x1FFF;
int crt = (s->dc_crt_control & SM501_DC_CRT_CONTROL_SEL) ? 1 : 0;
int fb_len = get_width(s, crt) * get_height(s, crt) * get_bpp(s, crt);
@@ -758,6 +749,13 @@ static void sm501_2d_operation(SM501State *s)
switch (cmd) {
case 0x00: /* copy area */
+ {
+ int src_x = (s->twoD_source >> 16) & 0x01FFF;
+ int src_y = s->twoD_source & 0xFFFF;
+ uint32_t src_base = s->twoD_source_base & 0x03FFFFFF;
+ uint8_t *src = s->local_mem + src_base;
+ int src_pitch = s->twoD_pitch & 0x1FFF;
+
#define COPY_AREA(_bpp, _pixel_type, rtl) {
\
int y, x, index_d, index_s;
\
for (y = 0; y < height; y++) { \
@@ -793,8 +791,11 @@ static void sm501_2d_operation(SM501State *s)
break;
}
break;
-
+ }
case 0x01: /* fill rectangle */
+ {
+ uint32_t color = s->twoD_foreground;
+
#define FILL_RECT(_bpp, _pixel_type) { \
int y, x; \
for (y = 0; y < height; y++) { \
@@ -819,7 +820,7 @@ static void sm501_2d_operation(SM501State *s)
break;
}
break;
-
+ }
default:
qemu_log_mask(LOG_UNIMP, "sm501: not implemented 2D operation: %d\n",
cmd);