These functions save and restore PCI device specific data - config
space of PCI device.
Tested save and restore with MSI and MSIX type.
Signed-off-by: Kirti Wankhede <address@hidden>
Reviewed-by: Neo Jia <address@hidden>
---
hw/vfio/pci.c | 163 ++++++++++++++++++++++++++++++++++++++++++
include/hw/vfio/vfio-common.h | 2 +
2 files changed, 165 insertions(+)
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 6c77c12e44b9..8deb11e87ef7 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -41,6 +41,7 @@
#include "trace.h"
#include "qapi/error.h"
#include "migration/blocker.h"
+#include "migration/qemu-file.h"
#define TYPE_VFIO_PCI "vfio-pci"
#define PCI_VFIO(obj) OBJECT_CHECK(VFIOPCIDevice, obj, TYPE_VFIO_PCI)
@@ -1632,6 +1633,50 @@ static void vfio_bars_prepare(VFIOPCIDevice *vdev)
}
}
+static int vfio_bar_validate(VFIOPCIDevice *vdev, int nr)
+{
+ PCIDevice *pdev = &vdev->pdev;
+ VFIOBAR *bar = &vdev->bars[nr];
+ uint64_t addr;
+ uint32_t addr_lo, addr_hi = 0;
+
+ /* Skip unimplemented BARs and the upper half of 64bit BARS. */
+ if (!bar->size) {
+ return 0;
+ }
+
+ addr_lo = pci_default_read_config(pdev, PCI_BASE_ADDRESS_0 + nr * 4, 4);
+
+ addr_lo = addr_lo & (bar->ioport ? PCI_BASE_ADDRESS_IO_MASK :
+ PCI_BASE_ADDRESS_MEM_MASK);
+ if (bar->type == PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ addr_hi = pci_default_read_config(pdev,
+ PCI_BASE_ADDRESS_0 + (nr + 1) * 4, 4);
+ }
+
+ addr = ((uint64_t)addr_hi << 32) | addr_lo;
+
+ if (!QEMU_IS_ALIGNED(addr, bar->size)) {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int vfio_bars_validate(VFIOPCIDevice *vdev)
+{
+ int i, ret;
+
+ for (i = 0; i < PCI_ROM_SLOT; i++) {
+ ret = vfio_bar_validate(vdev, i);
+ if (ret) {
+ error_report("vfio: BAR address %d validation failed", i);
+ return ret;
+ }
+ }
+ return 0;
+}
+
static void vfio_bar_register(VFIOPCIDevice *vdev, int nr)
{
VFIOBAR *bar = &vdev->bars[nr];
@@ -2414,11 +2459,129 @@ static Object *vfio_pci_get_object(VFIODevice
*vbasedev)
return OBJECT(vdev);
}
+static void vfio_pci_save_config(VFIODevice *vbasedev, QEMUFile *f)
+{
+ VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
+ PCIDevice *pdev = &vdev->pdev;
+ uint16_t pci_cmd;
+ int i;
+
+ for (i = 0; i < PCI_ROM_SLOT; i++) {
+ uint32_t bar;
+
+ bar = pci_default_read_config(pdev, PCI_BASE_ADDRESS_0 + i * 4, 4);
+ qemu_put_be32(f, bar);
+ }
+
+ qemu_put_be32(f, vdev->interrupt);
+ if (vdev->interrupt == VFIO_INT_MSI) {
+ uint32_t msi_flags, msi_addr_lo, msi_addr_hi = 0, msi_data;
+ bool msi_64bit;
+
+ msi_flags = pci_default_read_config(pdev, pdev->msi_cap +
PCI_MSI_FLAGS,
+ 2);
+ msi_64bit = (msi_flags & PCI_MSI_FLAGS_64BIT);
+
+ msi_addr_lo = pci_default_read_config(pdev,
+ pdev->msi_cap + PCI_MSI_ADDRESS_LO,
4);
+ qemu_put_be32(f, msi_addr_lo);
+
+ if (msi_64bit) {
+ msi_addr_hi = pci_default_read_config(pdev,
+ pdev->msi_cap +
PCI_MSI_ADDRESS_HI,
+ 4);
+ }
+ qemu_put_be32(f, msi_addr_hi);
+
+ msi_data = pci_default_read_config(pdev,
+ pdev->msi_cap + (msi_64bit ? PCI_MSI_DATA_64 :
PCI_MSI_DATA_32),
+ 2);
+ qemu_put_be32(f, msi_data);
+ } else if (vdev->interrupt == VFIO_INT_MSIX) {
+ uint16_t offset;
+
+ /* save enable bit and maskall bit */
+ offset = pci_default_read_config(pdev,
+ pdev->msix_cap + PCI_MSIX_FLAGS + 1, 2);
+ qemu_put_be16(f, offset);
+ msix_save(pdev, f);
+ }
+ pci_cmd = pci_default_read_config(pdev, PCI_COMMAND, 2);
+ qemu_put_be16(f, pci_cmd);
+}
+
+static int vfio_pci_load_config(VFIODevice *vbasedev, QEMUFile *f)
+{
+ VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
+ PCIDevice *pdev = &vdev->pdev;
+ uint32_t interrupt_type;
+ uint32_t msi_flags, msi_addr_lo, msi_addr_hi = 0, msi_data;
+ uint16_t pci_cmd;
+ bool msi_64bit;
+ int i, ret;
+
+ /* retore pci bar configuration */
+ pci_cmd = pci_default_read_config(pdev, PCI_COMMAND, 2);
+ vfio_pci_write_config(pdev, PCI_COMMAND,
+ pci_cmd & (!(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)), 2);
+ for (i = 0; i < PCI_ROM_SLOT; i++) {
+ uint32_t bar = qemu_get_be32(f);
+
+ vfio_pci_write_config(pdev, PCI_BASE_ADDRESS_0 + i * 4, bar, 4);
+ }
+
+ ret = vfio_bars_validate(vdev);