[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v3 11/18] target/arm: Handle watchpoints in sve_ld1_r
From: |
Richard Henderson |
Subject: |
[PATCH v3 11/18] target/arm: Handle watchpoints in sve_ld1_r |
Date: |
Tue, 21 Apr 2020 21:33:02 -0700 |
Handle all of the watchpoints for active elements all at once,
before we've modified the vector register. This removes the
TLB_WATCHPOINT bit from page[].flags, which means that we can
use the normal fast path via RAM.
Reviewed-by: Peter Maydell <address@hidden>
Signed-off-by: Richard Henderson <address@hidden>
---
target/arm/sve_helper.c | 72 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 71 insertions(+), 1 deletion(-)
diff --git a/target/arm/sve_helper.c b/target/arm/sve_helper.c
index 6bae342a17..7992a569b0 100644
--- a/target/arm/sve_helper.c
+++ b/target/arm/sve_helper.c
@@ -4371,6 +4371,70 @@ static bool sve_cont_ldst_pages(SVEContLdSt *info,
SVEContFault fault,
return have_work;
}
+static void sve_cont_ldst_watchpoints(SVEContLdSt *info, CPUARMState *env,
+ uint64_t *vg, target_ulong addr,
+ int esize, int msize, int wp_access,
+ uintptr_t retaddr)
+{
+#ifndef CONFIG_USER_ONLY
+ intptr_t mem_off, reg_off, reg_last;
+ int flags0 = info->page[0].flags;
+ int flags1 = info->page[1].flags;
+
+ if (likely(!((flags0 | flags1) & TLB_WATCHPOINT))) {
+ return;
+ }
+
+ /* Indicate that watchpoints are handled. */
+ info->page[0].flags = flags0 & ~TLB_WATCHPOINT;
+ info->page[1].flags = flags1 & ~TLB_WATCHPOINT;
+
+ if (flags0 & TLB_WATCHPOINT) {
+ mem_off = info->mem_off_first[0];
+ reg_off = info->reg_off_first[0];
+ reg_last = info->reg_off_last[0];
+
+ while (reg_off <= reg_last) {
+ uint64_t pg = vg[reg_off >> 6];
+ do {
+ if ((pg >> (reg_off & 63)) & 1) {
+ cpu_check_watchpoint(env_cpu(env), addr + mem_off,
+ msize, info->page[0].attrs,
+ wp_access, retaddr);
+ }
+ reg_off += esize;
+ mem_off += msize;
+ } while (reg_off <= reg_last && (reg_off & 63));
+ }
+ }
+
+ mem_off = info->mem_off_split;
+ if (mem_off >= 0) {
+ cpu_check_watchpoint(env_cpu(env), addr + mem_off, msize,
+ info->page[0].attrs, wp_access, retaddr);
+ }
+
+ mem_off = info->mem_off_first[1];
+ if ((flags1 & TLB_WATCHPOINT) && mem_off >= 0) {
+ reg_off = info->reg_off_first[1];
+ reg_last = info->reg_off_last[1];
+
+ do {
+ uint64_t pg = vg[reg_off >> 6];
+ do {
+ if ((pg >> (reg_off & 63)) & 1) {
+ cpu_check_watchpoint(env_cpu(env), addr + mem_off,
+ msize, info->page[1].attrs,
+ wp_access, retaddr);
+ }
+ reg_off += esize;
+ mem_off += msize;
+ } while (reg_off & 63);
+ } while (reg_off <= reg_last);
+ }
+#endif
+}
+
/*
* The result of tlb_vaddr_to_host for user-only is just g2h(x),
* which is always non-null. Elide the useless test.
@@ -4412,13 +4476,19 @@ void sve_ld1_r(CPUARMState *env, uint64_t *vg, const
target_ulong addr,
/* Probe the page(s). Exit with exception for any invalid page. */
sve_cont_ldst_pages(&info, FAULT_ALL, env, addr, MMU_DATA_LOAD, retaddr);
+ /* Handle watchpoints for all active elements. */
+ sve_cont_ldst_watchpoints(&info, env, vg, addr, 1 << esz, 1 << msz,
+ BP_MEM_READ, retaddr);
+
+ /* TODO: MTE check. */
+
flags = info.page[0].flags | info.page[1].flags;
if (unlikely(flags != 0)) {
#ifdef CONFIG_USER_ONLY
g_assert_not_reached();
#else
/*
- * At least one page includes MMIO (or watchpoints).
+ * At least one page includes MMIO.
* Any bus operation can fail with cpu_transaction_failed,
* which for ARM will raise SyncExternal. Perform the load
* into scratch memory to preserve register state until the end.
--
2.20.1
- Re: [PATCH v3 04/18] accel/tcg: Add probe_access_flags, (continued)
- [PATCH v3 06/18] target/arm: Use cpu_*_data_ra for sve_ldst_tlb_fn, Richard Henderson, 2020/04/22
- [PATCH v3 07/18] target/arm: Drop manual handling of set/clear_helper_retaddr, Richard Henderson, 2020/04/22
- [PATCH v3 05/18] accel/tcg: Add endian-specific cpu_{ld, st}* operations, Richard Henderson, 2020/04/22
- [PATCH v3 09/18] target/arm: Adjust interface of sve_ld1_host_fn, Richard Henderson, 2020/04/22
- [PATCH v3 08/18] target/arm: Add sve infrastructure for page lookup, Richard Henderson, 2020/04/22
- [PATCH v3 10/18] target/arm: Use SVEContLdSt in sve_ld1_r, Richard Henderson, 2020/04/22
- [PATCH v3 11/18] target/arm: Handle watchpoints in sve_ld1_r,
Richard Henderson <=
- [PATCH v3 12/18] target/arm: Use SVEContLdSt for multi-register contiguous loads, Richard Henderson, 2020/04/22
- [PATCH v3 13/18] target/arm: Update contiguous first-fault and no-fault loads, Richard Henderson, 2020/04/22
- Re: [PATCH v3 13/18] target/arm: Update contiguous first-fault and no-fault loads, Peter Maydell, 2020/04/27
- Re: [PATCH v3 13/18] target/arm: Update contiguous first-fault and no-fault loads, Richard Henderson, 2020/04/27
- Re: [PATCH v3 13/18] target/arm: Update contiguous first-fault and no-fault loads, Peter Maydell, 2020/04/27
- Re: [PATCH v3 13/18] target/arm: Update contiguous first-fault and no-fault loads, Richard Henderson, 2020/04/27
- Re: [PATCH v3 13/18] target/arm: Update contiguous first-fault and no-fault loads, Peter Maydell, 2020/04/27
- Re: [PATCH v3 13/18] target/arm: Update contiguous first-fault and no-fault loads, Richard Henderson, 2020/04/28
[PATCH v3 14/18] target/arm: Use SVEContLdSt for contiguous stores, Richard Henderson, 2020/04/22
[PATCH v3 15/18] target/arm: Reuse sve_probe_page for gather first-fault loads, Richard Henderson, 2020/04/22