[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers |
Date: |
Fri, 31 Jan 2020 04:09:47 +0100 |
Hi Aleksandar,
Cc'ing Thomas & Daniel who are not lawyers but tried to explain me few
times how licensing works.
On Fri, Jan 31, 2020 at 2:56 AM Aleksandar Markovic
<address@hidden> wrote:
> On Fri, Jan 31, 2020 at 1:03 AM Aleksandar Markovic
> <address@hidden> wrote:
> >
> > From: Philippe Mathieu-Daudé <address@hidden>
> >
> > Add some AVR microcontrollers from the ATmega family:
> >
> > - middle range: ATmega168 and ATmega328
> > - high range: ATmega1280 and ATmega2560
> >
> > For product comparison:
> > https://www.microchip.com/wwwproducts/ProductCompare/ATmega168P/ATmega328P
> > https://www.microchip.com/wwwproducts/ProductCompare/ATmega1280/ATmega2560
> >
> > Datasheets:
> >
> > http://ww1.microchip.com/downloads/en/DeviceDoc/ATmega48A-PA-88A-PA-168A-PA-328-P-DS-DS40002061A.pdf
> >
> > http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf
> >
> > [AM: Remove word 'Atmel' from filenames and all elements of code]
> > Suggested-by: Aleksandar Markovic <address@hidden>
> >
> > Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
> > Signed-off-by: Richard Henderson <address@hidden>
> > Signed-off-by: Aleksandar Markovic <address@hidden>
> > ---
> > hw/avr/Kconfig | 5 +
> > hw/avr/Makefile.objs | 1 +
> > hw/avr/atmega.c | 470
> > +++++++++++++++++++++++++++++++++++++++++++++++++++
> > hw/avr/atmega.h | 48 ++++++
> > 4 files changed, 524 insertions(+)
> > create mode 100644 hw/avr/Kconfig
> > create mode 100644 hw/avr/atmega.c
> > create mode 100644 hw/avr/atmega.h
> >
> > diff --git a/hw/avr/Kconfig b/hw/avr/Kconfig
> > new file mode 100644
> > index 0000000..9e6527e
> > --- /dev/null
> > +++ b/hw/avr/Kconfig
> > @@ -0,0 +1,5 @@
> > +config AVR_ATMEGA_MCU
> > + bool
> > + select AVR_TIMER16
> > + select AVR_USART
> > + select AVR_POWER
> > diff --git a/hw/avr/Makefile.objs b/hw/avr/Makefile.objs
> > index 123f174..af0fdde 100644
> > --- a/hw/avr/Makefile.objs
> > +++ b/hw/avr/Makefile.objs
> > @@ -1 +1,2 @@
> > obj-y += boot.o
> > +obj-$(CONFIG_AVR_ATMEGA_MCU) += atmega.o
> > diff --git a/hw/avr/atmega.c b/hw/avr/atmega.c
> > new file mode 100644
> > index 0000000..8cdf28b
> > --- /dev/null
> > +++ b/hw/avr/atmega.c
> > @@ -0,0 +1,470 @@
> > +/*
> > + * QEMU ATmega MCU
> > + *
> > + * Copyright (c) 2019 Philippe Mathieu-Daudé
> > + *
> > + * This work is licensed under the terms of the GNU GPLv2 or later.
> > + * See the COPYING file in the top-level directory.
> > + * SPDX-License-Identifier: GPL-2.0-or-later
> > + */
>
> Philippe,
>
> Michael and I already agreed at some moment that the whole target AVR
> should have harmonized licenses, and Sarrah agreed to change her
> license to achieve this. Do you agree to harmonize your licenses with
> the rest of the project? (This would mean changing the preable, but of
> course you remain copyright carrier as is now.)
What license do you want to use? I always use "GPLv2 or later" with
QEMU, mostly following what the others do.
Per https://wiki.qemu.org/License:
Source files with no licensing information are released under the
GNU General Public License, version 2 or (at your option) any later
version.
Reading about licensing is not fun :(
>
> Thanks,
> Aleksandar
- Re: [PATCH rc4 23/29] hw/avr: Add helper to load raw/ELF firmware binaries, (continued)
[PATCH rc4 29/29] .travis.yml: Run the AVR acceptance tests, Aleksandar Markovic, 2020/01/30
[PATCH rc4 18/29] hw/misc: Add limited support for AVR power device, Aleksandar Markovic, 2020/01/30
[PATCH rc4 25/29] hw/avr: Add some Arduino boards, Aleksandar Markovic, 2020/01/30
[PATCH rc4 15/29] target/avr: Add instruction disassembly function, Aleksandar Markovic, 2020/01/30
[PATCH rc4 27/29] tests/boot-serial-test: Test some Arduino boards (AVR based), Aleksandar Markovic, 2020/01/30
[PATCH rc4 28/29] tests/acceptance: Test the Arduino MEGA2560 board, Aleksandar Markovic, 2020/01/30
[PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers, Aleksandar Markovic, 2020/01/30
- Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers, Aleksandar Markovic, 2020/01/30
- Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers,
Philippe Mathieu-Daudé <=
- Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers, Aleksandar Markovic, 2020/01/30
- Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers, Aleksandar Markovic, 2020/01/30
- Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers, Thomas Huth, 2020/01/31
- Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers, Aleksandar Markovic, 2020/01/31
- Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers, Philippe Mathieu-Daudé, 2020/01/31
- Re: [PATCH rc4 24/29] hw/avr: Add some ATmega microcontrollers, Aleksandar Markovic, 2020/01/31
[PATCH rc4 17/29] hw/timer: Add limited support for AVR 16-bit timer peripheral, Aleksandar Markovic, 2020/01/30
Re: [PATCH rc4 00/29] target/avr merger, Aleksandar Markovic, 2020/01/30