qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v4 12/14] dp8393x: Always update RRA pointers and sequence number


From: Finn Thain
Subject: [PATCH v4 12/14] dp8393x: Always update RRA pointers and sequence numbers
Date: Wed, 29 Jan 2020 20:27:49 +1100

These operations need to take place regardless of whether or not
rx descriptors have been used up (that is, EOL flag was observed).

The algorithm is now the same for a packet that was withheld as for
a packet that was not.

Signed-off-by: Finn Thain <address@hidden>
Tested-by: Laurent Vivier <address@hidden>
---
 hw/net/dp8393x.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/hw/net/dp8393x.c b/hw/net/dp8393x.c
index 99c5dad7c4..1b73a8703b 100644
--- a/hw/net/dp8393x.c
+++ b/hw/net/dp8393x.c
@@ -897,12 +897,14 @@ static ssize_t dp8393x_receive(NetClientState *nc, const 
uint8_t * buf,
         /* Move to next descriptor */
         s->regs[SONIC_CRDA] = s->regs[SONIC_LLFA];
         s->regs[SONIC_ISR] |= SONIC_ISR_PKTRX;
-        s->regs[SONIC_RSC] = (s->regs[SONIC_RSC] & 0xff00) | 
(((s->regs[SONIC_RSC] & 0x00ff) + 1) & 0x00ff);
+    }
 
-        if (s->regs[SONIC_RCR] & SONIC_RCR_LPKT) {
-            /* Read next RRA */
-            dp8393x_do_read_rra(s);
-        }
+    s->regs[SONIC_RSC] = (s->regs[SONIC_RSC] & 0xff00) |
+                         ((s->regs[SONIC_RSC] + 1) & 0x00ff);
+
+    if (s->regs[SONIC_RCR] & SONIC_RCR_LPKT) {
+        /* Read next RRA */
+        dp8393x_do_read_rra(s);
     }
 
     /* Done */
-- 
2.24.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]