qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH REPOST v3 64/80] ppc/{ppc440_bamboo,sam460ex}: drop RAM size


From: David Gibson
Subject: Re: [PATCH REPOST v3 64/80] ppc/{ppc440_bamboo,sam460ex}: drop RAM size fixup
Date: Mon, 27 Jan 2020 14:39:36 +1100

On Thu, Jan 23, 2020 at 12:38:29PM +0100, Igor Mammedov wrote:
> If user provided non-sense RAM size, board will complain and
> continue running with max RAM size supported or sometimes
> crash like this:
>   %QEMU -M bamboo -m 1
>     exec.c:1926: find_ram_offset: Assertion `size != 0' failed.
>     Aborted (core dumped)
> Also RAM is going to be allocated by generic code, so it won't be
> possible for board to fix things up for user.
> 
> Make it error message and exit to force user fix CLI,
> instead of accepting non-sense CLI values.
> That also fixes crash issue, since wrongly calculated size
> isn't used to allocate RAM
> 
> Signed-off-by: Igor Mammedov <address@hidden>

Acked-by: David Gibson <address@hidden>

> ---
> v2:
>   * s/ppc4xx_sdram_adjust/ppc4xx_sdram_prep/
>      (BALATON Zoltan <address@hidden>)
>   * print possible valid ram size id not all RAM was distributed
>   * initialize ram_bases/ram_bases at the same time we are checking
>     that user supplied RAM would fit available banks and drop nested
>     loop that were duplicating the same calculations.
>   * coincidentally fix crash when -m is less than minimal bank size
> v3:
>   * s/ppc4xx_sdram_prep/ppc4xx_sdram_banks/
>       (BALATON Zoltan <address@hidden>)
>   * fix subject line in commit message
> v3.1:
>   * add lost 'break' statement in 'j' loop
> v3.2:
>   * replace global ram_size with machine->ram_size in ppc4xx_sdram_banks() 
> call
>   * add a comment about the expected sorting order within sdram_bank_sizes[]
>     (BALATON Zoltan <address@hidden>)
> 
> CC: address@hidden
> CC: address@hidden
> CC: address@hidden
> ---
>  include/hw/ppc/ppc4xx.h |  9 ++++----
>  hw/ppc/ppc440_bamboo.c  | 11 ++++-----
>  hw/ppc/ppc4xx_devs.c    | 60 
> ++++++++++++++++++++++++++-----------------------
>  hw/ppc/sam460ex.c       |  5 ++---
>  4 files changed, 42 insertions(+), 43 deletions(-)
> 
> diff --git a/include/hw/ppc/ppc4xx.h b/include/hw/ppc/ppc4xx.h
> index 7d82259..b8c8f32 100644
> --- a/include/hw/ppc/ppc4xx.h
> +++ b/include/hw/ppc/ppc4xx.h
> @@ -42,11 +42,10 @@ enum {
>  qemu_irq *ppcuic_init (CPUPPCState *env, qemu_irq *irqs,
>                         uint32_t dcr_base, int has_ssr, int has_vr);
>  
> -ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks,
> -                               MemoryRegion ram_memories[],
> -                               hwaddr ram_bases[],
> -                               hwaddr ram_sizes[],
> -                               const ram_addr_t sdram_bank_sizes[]);
> +void ppc4xx_sdram_banks(ram_addr_t ram_size, int nr_banks,
> +                        MemoryRegion ram_memories[],
> +                        hwaddr ram_bases[], hwaddr ram_sizes[],
> +                        const ram_addr_t sdram_bank_sizes[]);
>  
>  void ppc4xx_sdram_init (CPUPPCState *env, qemu_irq irq, int nbanks,
>                          MemoryRegion ram_memories[],
> diff --git a/hw/ppc/ppc440_bamboo.c b/hw/ppc/ppc440_bamboo.c
> index b782641..29a9642 100644
> --- a/hw/ppc/ppc440_bamboo.c
> +++ b/hw/ppc/ppc440_bamboo.c
> @@ -158,7 +158,6 @@ static void main_cpu_reset(void *opaque)
>  
>  static void bamboo_init(MachineState *machine)
>  {
> -    ram_addr_t ram_size = machine->ram_size;
>      const char *kernel_filename = machine->kernel_filename;
>      const char *kernel_cmdline = machine->kernel_cmdline;
>      const char *initrd_filename = machine->initrd_filename;
> @@ -203,10 +202,8 @@ static void bamboo_init(MachineState *machine)
>      /* SDRAM controller */
>      memset(ram_bases, 0, sizeof(ram_bases));
>      memset(ram_sizes, 0, sizeof(ram_sizes));
> -    ram_size = ppc4xx_sdram_adjust(ram_size, PPC440EP_SDRAM_NR_BANKS,
> -                                   ram_memories,
> -                                   ram_bases, ram_sizes,
> -                                   ppc440ep_sdram_bank_sizes);
> +    ppc4xx_sdram_banks(machine->ram_size, PPC440EP_SDRAM_NR_BANKS, 
> ram_memories,
> +                       ram_bases, ram_sizes, ppc440ep_sdram_bank_sizes);
>      /* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. 
> */
>      ppc4xx_sdram_init(env, pic[14], PPC440EP_SDRAM_NR_BANKS, ram_memories,
>                        ram_bases, ram_sizes, 1);
> @@ -268,7 +265,7 @@ static void bamboo_init(MachineState *machine)
>      /* Load initrd. */
>      if (initrd_filename) {
>          initrd_size = load_image_targphys(initrd_filename, RAMDISK_ADDR,
> -                                          ram_size - RAMDISK_ADDR);
> +                                          machine->ram_size - RAMDISK_ADDR);
>  
>          if (initrd_size < 0) {
>              error_report("could not load ram disk '%s' at %x",
> @@ -279,7 +276,7 @@ static void bamboo_init(MachineState *machine)
>  
>      /* If we're loading a kernel directly, we must load the device tree too. 
> */
>      if (kernel_filename) {
> -        if (bamboo_load_device_tree(FDT_ADDR, ram_size, RAMDISK_ADDR,
> +        if (bamboo_load_device_tree(FDT_ADDR, machine->ram_size, 
> RAMDISK_ADDR,
>                                      initrd_size, kernel_cmdline) < 0) {
>              error_report("couldn't load device tree");
>              exit(1);
> diff --git a/hw/ppc/ppc4xx_devs.c b/hw/ppc/ppc4xx_devs.c
> index c2e5013..d89008a 100644
> --- a/hw/ppc/ppc4xx_devs.c
> +++ b/hw/ppc/ppc4xx_devs.c
> @@ -668,21 +668,22 @@ void ppc4xx_sdram_init (CPUPPCState *env, qemu_irq irq, 
> int nbanks,
>  
>  /* Fill in consecutive SDRAM banks with 'ram_size' bytes of memory.
>   *
> - * sdram_bank_sizes[] must be 0-terminated.
> + * sdram_bank_sizes[] must be in descending order, that is sizes[i] > 
> sizes[i+1]
> + * and must be 0-terminated.
>   *
>   * The 4xx SDRAM controller supports a small number of banks, and each bank
>   * must be one of a small set of sizes. The number of banks and the supported
>   * sizes varies by SoC. */
> -ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks,
> -                               MemoryRegion ram_memories[],
> -                               hwaddr ram_bases[],
> -                               hwaddr ram_sizes[],
> -                               const ram_addr_t sdram_bank_sizes[])
> +void ppc4xx_sdram_banks(ram_addr_t ram_size, int nr_banks,
> +                        MemoryRegion ram_memories[],
> +                        hwaddr ram_bases[], hwaddr ram_sizes[],
> +                        const ram_addr_t sdram_bank_sizes[])
>  {
>      MemoryRegion *ram = g_malloc0(sizeof(*ram));
>      ram_addr_t size_left = ram_size;
>      ram_addr_t base = 0;
>      ram_addr_t bank_size;
> +    int last_bank = 0;
>      int i;
>      int j;
>  
> @@ -690,7 +691,12 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int 
> nr_banks,
>          for (j = 0; sdram_bank_sizes[j] != 0; j++) {
>              bank_size = sdram_bank_sizes[j];
>              if (bank_size <= size_left) {
> +                ram_bases[i] = base;
> +                ram_sizes[i] = bank_size;
> +                base += bank_size;
>                  size_left -= bank_size;
> +                last_bank = i;
> +                break;
>              }
>          }
>          if (!size_left) {
> @@ -699,34 +705,32 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int 
> nr_banks,
>          }
>      }
>  
> -    ram_size -= size_left;
>      if (size_left) {
> -        error_report("Truncating memory to %" PRId64 " MiB to fit SDRAM"
> -                     " controller limits", ram_size / MiB);
> +        ram_addr_t used_size = ram_size - size_left;
> +        GString *s = g_string_new(NULL);
> +
> +        for (i = 0; sdram_bank_sizes[i]; i++) {
> +            g_string_append_printf(s, "%" PRIi64 "%s",
> +                                   sdram_bank_sizes[i] / MiB,
> +                                   sdram_bank_sizes[i + 1] ? " ," : "");
> +        }
> +        error_report("Max %d banks of %s MB DIMM/bank supported",
> +            nr_banks, s->str);
> +        error_report("Possible valid RAM size: %" PRIi64,
> +            used_size ? used_size / MiB : sdram_bank_sizes[i - 1] / MiB);
> +
> +        g_string_free(s, true);
> +        exit(EXIT_FAILURE);
>      }
>  
>      memory_region_allocate_system_memory(ram, NULL, "ppc4xx.sdram", 
> ram_size);
>  
> -    size_left = ram_size;
> -    for (i = 0; i < nr_banks && size_left; i++) {
> -        for (j = 0; sdram_bank_sizes[j] != 0; j++) {
> -            bank_size = sdram_bank_sizes[j];
> -
> -            if (bank_size <= size_left) {
> -                char name[32];
> -                snprintf(name, sizeof(name), "ppc4xx.sdram%d", i);
> -                memory_region_init_alias(&ram_memories[i], NULL, name, ram,
> -                                         base, bank_size);
> -                ram_bases[i] = base;
> -                ram_sizes[i] = bank_size;
> -                base += bank_size;
> -                size_left -= bank_size;
> -                break;
> -            }
> -        }
> +    for (i = 0; i <= last_bank; i++) {
> +        char name[32];
> +        snprintf(name, sizeof(name), "ppc4xx.sdram%d", i);
> +        memory_region_init_alias(&ram_memories[i], NULL, name, ram,
> +                                 ram_bases[i], ram_sizes[i]);
>      }
> -
> -    return ram_size;
>  }
>  
>  
> /*****************************************************************************/
> diff --git a/hw/ppc/sam460ex.c b/hw/ppc/sam460ex.c
> index 437e214..949acba 100644
> --- a/hw/ppc/sam460ex.c
> +++ b/hw/ppc/sam460ex.c
> @@ -324,9 +324,8 @@ static void sam460ex_init(MachineState *machine)
>      /* SDRAM controller */
>      /* put all RAM on first bank because board has one slot
>       * and firmware only checks that */
> -    machine->ram_size = ppc4xx_sdram_adjust(machine->ram_size, 1,
> -                                   ram_memories, ram_bases, ram_sizes,
> -                                   ppc460ex_sdram_bank_sizes);
> +    ppc4xx_sdram_banks(machine->ram_size, 1, ram_memories, ram_bases, 
> ram_sizes,
> +                       ppc460ex_sdram_bank_sizes);
>  
>      /* FIXME: does 460EX have ECC interrupts? */
>      ppc440_sdram_init(env, SDRAM_NR_BANKS, ram_memories,

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

Attachment: signature.asc
Description: PGP signature


reply via email to

[Prev in Thread] Current Thread [Next in Thread]