qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PULL 23/26] pnv/psi: Add device reset hook


From: David Gibson
Subject: [PULL 23/26] pnv/psi: Add device reset hook
Date: Wed, 8 Jan 2020 16:23:09 +1100

From: Greg Kurz <address@hidden>

And call it from a QEMU reset handler. This allows each PNV child class to
override the reset hook if needed, eg. POWER8 doesn't but POWER9 does.
The proper way to do that would be to use device_class_set_parent_reset(),
but defining a Pnv8PsiClass and a Pnv9PsiClass types with a parent_reset
pointer adds a fair amount of code. Calling pnv_psi_reset() explicitely is
fine for now.

A subsequent patch will consolidate the call to qemu_register_reset() in
a single place.

Signed-off-by: Greg Kurz <address@hidden>
Signed-off-by: Cédric Le Goater <address@hidden>
Message-Id: <address@hidden>
Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
Signed-off-by: David Gibson <address@hidden>
---
 hw/ppc/pnv_psi.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/hw/ppc/pnv_psi.c b/hw/ppc/pnv_psi.c
index 4da3d25686..846171914f 100644
--- a/hw/ppc/pnv_psi.c
+++ b/hw/ppc/pnv_psi.c
@@ -455,7 +455,7 @@ static const MemoryRegionOps pnv_psi_xscom_ops = {
     }
 };
 
-static void pnv_psi_reset(void *dev)
+static void pnv_psi_reset(DeviceState *dev)
 {
     PnvPsi *psi = PNV_PSI(dev);
 
@@ -464,6 +464,11 @@ static void pnv_psi_reset(void *dev)
     psi->regs[PSIHB_XSCOM_BAR] = psi->bar | PSIHB_BAR_EN;
 }
 
+static void pnv_psi_reset_handler(void *dev)
+{
+    device_reset(DEVICE(dev));
+}
+
 static void pnv_psi_power8_instance_init(Object *obj)
 {
     Pnv8Psi *psi8 = PNV8_PSI(obj);
@@ -526,7 +531,7 @@ static void pnv_psi_power8_realize(DeviceState *dev, Error 
**errp)
             ((uint64_t) i << PSIHB_XIVR_SRC_SH);
     }
 
-    qemu_register_reset(pnv_psi_reset, dev);
+    qemu_register_reset(pnv_psi_reset_handler, dev);
 }
 
 static int pnv_psi_dt_xscom(PnvXScomInterface *dev, void *fdt, int 
xscom_offset)
@@ -809,7 +814,7 @@ static void pnv_psi_power9_irq_set(PnvPsi *psi, int irq, 
bool state)
     qemu_set_irq(psi->qirqs[irq], state);
 }
 
-static void pnv_psi_power9_reset(void *dev)
+static void pnv_psi_power9_reset(DeviceState *dev)
 {
     Pnv9Psi *psi = PNV9_PSI(dev);
 
@@ -863,7 +868,7 @@ static void pnv_psi_power9_realize(DeviceState *dev, Error 
**errp)
 
     pnv_psi_set_bar(psi, psi->bar | PSIHB_BAR_EN);
 
-    qemu_register_reset(pnv_psi_power9_reset, dev);
+    qemu_register_reset(pnv_psi_reset_handler, dev);
 }
 
 static void pnv_psi_power9_class_init(ObjectClass *klass, void *data)
@@ -875,6 +880,7 @@ static void pnv_psi_power9_class_init(ObjectClass *klass, 
void *data)
 
     dc->desc    = "PowerNV PSI Controller POWER9";
     dc->realize = pnv_psi_power9_realize;
+    dc->reset   = pnv_psi_power9_reset;
 
     ppc->xscom_pcba = PNV9_XSCOM_PSIHB_BASE;
     ppc->xscom_size = PNV9_XSCOM_PSIHB_SIZE;
@@ -927,6 +933,7 @@ static void pnv_psi_class_init(ObjectClass *klass, void 
*data)
 
     dc->desc = "PowerNV PSI Controller";
     dc->props = pnv_psi_properties;
+    dc->reset = pnv_psi_reset;
 }
 
 static const TypeInfo pnv_psi_info = {
-- 
2.24.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]