Re: [PACTH v3 5/5] docs: tpm: Add example command line for ppc64 and tpm-spapr

[Marc-André Lureau]

Hi

On Wed, Dec 11, 2019 at 8:25 PM Stefan Berger
<address@hidden> wrote:
>
> Add an example to the TPM docs for how to add a TPM SPAPR
> device model to a QEMU VM emulating a pSeries machine.
>
> Signed-off-by: Stefan Berger <address@hidden>

Reviewed-by: Marc-André Lureau <address@hidden>

(I'll look at converting it to rst)

> ---
>  docs/specs/tpm.txt | 20 +++++++++++++++++++-
>  1 file changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/docs/specs/tpm.txt b/docs/specs/tpm.txt
> index 9c8cca042d..9c3e67d8a7 100644
> --- a/docs/specs/tpm.txt
> +++ b/docs/specs/tpm.txt
> @@ -34,6 +34,12 @@ The CRB interface makes a memory mapped IO region in the 
> area 0xfed40000 -
>  QEMU files related to TPM CRB interface:
>   - hw/tpm/tpm_crb.c
>
> +
> +pSeries (ppc64) machines offer a tpm-spapr device model.
> +
> +QEMU files related to the SPAPR interface:
> + - hw/tpm/tpm_spapr.c
> +
>  = fw_cfg interface =
>
>  The bios/firmware may read the "etc/tpm/config" fw_cfg entry for
> @@ -281,7 +287,7 @@ swtpm socket --tpmstate dir=/tmp/mytpm1 \
>    --log level=20
>
>  Command line to start QEMU with the TPM emulator device communicating with
> -the swtpm:
> +the swtpm (x86):
>
>  qemu-system-x86_64 -display sdl -accel kvm \
>    -m 1024 -boot d -bios bios-256k.bin -boot menu=on \
> @@ -289,6 +295,18 @@ qemu-system-x86_64 -display sdl -accel kvm \
>    -tpmdev emulator,id=tpm0,chardev=chrtpm \
>    -device tpm-tis,tpmdev=tpm0 test.img
>
> +In case a pSeries machine is emulated, use the following command line:
> +
> +qemu-system-ppc64 -display sdl -machine pseries,accel=kvm \
> +  -m 1024 -bios slof.bin -boot menu=on \
> +  -nodefaults -device VGA -device pci-ohci -device usb-kbd \
> +  -chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
> +  -tpmdev emulator,id=tpm0,chardev=chrtpm \
> +  -device tpm-spapr,tpmdev=tpm0 \
> +  -device spapr-vscsi,id=scsi0,reg=0x00002000 \
> +  -device 
> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x3,drive=drive-virtio-disk0,id=virtio-disk0
>  \
> +  -drive file=test.img,format=raw,if=none,id=drive-virtio-disk0
> +
>
>  In case SeaBIOS is used as firmware, it should show the TPM menu item
>  after entering the menu with 'ESC'.
> --
> 2.21.0
>
>


-- 
Marc-André Lureau