[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v12 2/6] ppc: spapr: Introduce FWNMI capability
From: |
Greg Kurz |
Subject: |
Re: [Qemu-devel] [PATCH v12 2/6] ppc: spapr: Introduce FWNMI capability |
Date: |
Fri, 30 Aug 2019 15:58:56 +0200 |
On Fri, 30 Aug 2019 14:43:40 +0530
Aravinda Prasad <address@hidden> wrote:
> Introduce the KVM capability KVM_CAP_PPC_FWNMI so that
> the KVM causes guest exit with NMI as exit reason
> when it encounters a machine check exception on the
> address belonging to a guest. Without this capability
> enabled, KVM redirects machine check exceptions to
> guest's 0x200 vector.
>
> This patch also introduces fwnmi-mce capability to
> deal with the case when a guest with the
> KVM_CAP_PPC_FWNMI capability enabled is attempted
> to migrate to a host that does not support this
> capability.
>
> Signed-off-by: Aravinda Prasad <address@hidden>
> ---
> hw/ppc/spapr.c | 1 +
> hw/ppc/spapr_caps.c | 29 +++++++++++++++++++++++++++++
> include/hw/ppc/spapr.h | 4 +++-
> target/ppc/kvm.c | 22 ++++++++++++++++++++++
> target/ppc/kvm_ppc.h | 11 +++++++++++
> 5 files changed, 66 insertions(+), 1 deletion(-)
>
> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> index ea56499..8288e8b 100644
> --- a/hw/ppc/spapr.c
> +++ b/hw/ppc/spapr.c
> @@ -4487,6 +4487,7 @@ static void spapr_machine_class_init(ObjectClass *oc,
> void *data)
> smc->default_caps.caps[SPAPR_CAP_NESTED_KVM_HV] = SPAPR_CAP_OFF;
> smc->default_caps.caps[SPAPR_CAP_LARGE_DECREMENTER] = SPAPR_CAP_ON;
> smc->default_caps.caps[SPAPR_CAP_CCF_ASSIST] = SPAPR_CAP_OFF;
> + smc->default_caps.caps[SPAPR_CAP_FWNMI_MCE] = SPAPR_CAP_OFF;
> spapr_caps_add_properties(smc, &error_abort);
> smc->irq = &spapr_irq_dual;
> smc->dr_phb_enabled = true;
> diff --git a/hw/ppc/spapr_caps.c b/hw/ppc/spapr_caps.c
> index 481dfd2..c11ff87 100644
> --- a/hw/ppc/spapr_caps.c
> +++ b/hw/ppc/spapr_caps.c
> @@ -496,6 +496,25 @@ static void cap_ccf_assist_apply(SpaprMachineState
> *spapr, uint8_t val,
> }
> }
>
> +static void cap_fwnmi_mce_apply(SpaprMachineState *spapr, uint8_t val,
> + Error **errp)
> +{
> + if (!val) {
> + return; /* Disabled by default */
> + }
> +
> + if (tcg_enabled()) {
> + /*
> + * TCG support may not be correct in some conditions (e.g., in case
> + * of software injected faults like duplicate SLBs).
> + */
> + warn_report("Firmware Assisted Non-Maskable Interrupts not supported
> in TCG");
> + } else if (kvm_enabled() && !kvmppc_has_cap_ppc_fwnmi()) {
> + error_setg(errp,
> +"Firmware Assisted Non-Maskable Interrupts not supported by KVM, try
> cap-fwnmi-mce=off");
> + }
> +}
> +
> SpaprCapabilityInfo capability_table[SPAPR_CAP_NUM] = {
> [SPAPR_CAP_HTM] = {
> .name = "htm",
> @@ -595,6 +614,15 @@ SpaprCapabilityInfo capability_table[SPAPR_CAP_NUM] = {
> .type = "bool",
> .apply = cap_ccf_assist_apply,
> },
> + [SPAPR_CAP_FWNMI_MCE] = {
> + .name = "fwnmi-mce",
> + .description = "Handle fwnmi machine check exceptions",
> + .index = SPAPR_CAP_FWNMI_MCE,
> + .get = spapr_cap_get_bool,
> + .set = spapr_cap_set_bool,
> + .type = "bool",
> + .apply = cap_fwnmi_mce_apply,
> + },
> };
>
> static SpaprCapabilities default_caps_with_cpu(SpaprMachineState *spapr,
> @@ -734,6 +762,7 @@ SPAPR_CAP_MIG_STATE(hpt_maxpagesize,
> SPAPR_CAP_HPT_MAXPAGESIZE);
> SPAPR_CAP_MIG_STATE(nested_kvm_hv, SPAPR_CAP_NESTED_KVM_HV);
> SPAPR_CAP_MIG_STATE(large_decr, SPAPR_CAP_LARGE_DECREMENTER);
> SPAPR_CAP_MIG_STATE(ccf_assist, SPAPR_CAP_CCF_ASSIST);
> +SPAPR_CAP_MIG_STATE(fwnmi, SPAPR_CAP_FWNMI_MCE);
>
> void spapr_caps_init(SpaprMachineState *spapr)
> {
> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
> index 03111fd..66049ac 100644
> --- a/include/hw/ppc/spapr.h
> +++ b/include/hw/ppc/spapr.h
> @@ -79,8 +79,10 @@ typedef enum {
> #define SPAPR_CAP_LARGE_DECREMENTER 0x08
> /* Count Cache Flush Assist HW Instruction */
> #define SPAPR_CAP_CCF_ASSIST 0x09
> +/* FWNMI machine check handling */
> +#define SPAPR_CAP_FWNMI_MCE 0x0A
> /* Num Caps */
> -#define SPAPR_CAP_NUM (SPAPR_CAP_CCF_ASSIST + 1)
> +#define SPAPR_CAP_NUM (SPAPR_CAP_FWNMI_MCE + 1)
>
> /*
> * Capability Values
> diff --git a/target/ppc/kvm.c b/target/ppc/kvm.c
> index 8c5b1f2..c055fc1 100644
> --- a/target/ppc/kvm.c
> +++ b/target/ppc/kvm.c
> @@ -85,6 +85,7 @@ static int cap_ppc_safe_indirect_branch;
> static int cap_ppc_count_cache_flush_assist;
> static int cap_ppc_nested_kvm_hv;
> static int cap_large_decr;
> +static int cap_ppc_fwnmi;
>
> static uint32_t debug_inst_opcode;
>
> @@ -2055,6 +2056,22 @@ void kvmppc_set_mpic_proxy(PowerPCCPU *cpu, int
> mpic_proxy)
> }
> }
>
> +int kvmppc_set_fwnmi(void)
> +{
> + PowerPCCPU *cpu = POWERPC_CPU(first_cpu);
> + CPUState *cs = CPU(cpu);
> + int ret;
> +
> + ret = kvm_vcpu_enable_cap(cs, KVM_CAP_PPC_FWNMI, 0);
> + if (ret) {
> + error_report("This KVM version does not support FWNMI");
> + return ret;
> + }
> +
> + cap_ppc_fwnmi = 1;
Hmm... AFAICT the meaning of cap_ppc_fwnmi should just be "KVM knows about
FWNMI", not "FWNMI was successfully enabled in KVM". Your v10 used to set
cap_ppc_fwnmi in kvm_arch_init() just like the other guys... why this change ?
> + return ret;
> +}
> +
> int kvmppc_smt_threads(void)
> {
> return cap_ppc_smt ? cap_ppc_smt : 1;
> @@ -2355,6 +2372,11 @@ bool kvmppc_has_cap_mmu_hash_v3(void)
> return cap_mmu_hash_v3;
> }
>
> +bool kvmppc_has_cap_ppc_fwnmi(void)
> +{
> + return cap_ppc_fwnmi;
> +}
> +
> static bool kvmppc_power8_host(void)
> {
> bool ret = false;
> diff --git a/target/ppc/kvm_ppc.h b/target/ppc/kvm_ppc.h
> index 98bd7d5..2990898 100644
> --- a/target/ppc/kvm_ppc.h
> +++ b/target/ppc/kvm_ppc.h
> @@ -27,6 +27,8 @@ void kvmppc_enable_h_page_init(void);
> void kvmppc_set_papr(PowerPCCPU *cpu);
> int kvmppc_set_compat(PowerPCCPU *cpu, uint32_t compat_pvr);
> void kvmppc_set_mpic_proxy(PowerPCCPU *cpu, int mpic_proxy);
> +int kvmppc_set_fwnmi(void);
> +bool kvmppc_has_cap_ppc_fwnmi(void);
> int kvmppc_smt_threads(void);
> void kvmppc_hint_smt_possible(Error **errp);
> int kvmppc_set_smt_threads(int smt);
> @@ -159,6 +161,15 @@ static inline void kvmppc_set_mpic_proxy(PowerPCCPU
> *cpu, int mpic_proxy)
> {
> }
>
> +static inline int kvmppc_set_fwnmi(void)
> +{
Missing return -1;
> +}
> +
> +static inline bool kvmppc_has_cap_ppc_fwnmi(void)
> +{
> + return false;
> +}
> +
> static inline int kvmppc_smt_threads(void)
> {
> return 1;
>
- [Qemu-devel] [PATCH v12 0/6] target-ppc/spapr: Add FWNMI support in QEMU for PowerKVM guests, Aravinda Prasad, 2019/08/30
- [Qemu-devel] [PATCH v12 1/6] Wrapper function to wait on condition for the main loop mutex, Aravinda Prasad, 2019/08/30
- [Qemu-devel] [PATCH v12 3/6] target/ppc: Handle NMI guest exit, Aravinda Prasad, 2019/08/30
- [Qemu-devel] [PATCH v12 2/6] ppc: spapr: Introduce FWNMI capability, Aravinda Prasad, 2019/08/30
- Re: [Qemu-devel] [PATCH v12 2/6] ppc: spapr: Introduce FWNMI capability,
Greg Kurz <=
- [Qemu-devel] [PATCH v12 4/6] target/ppc: Build rtas error log upon an MCE, Aravinda Prasad, 2019/08/30
- [Qemu-devel] [PATCH v12 5/6] ppc: spapr: Handle "ibm, nmi-register" and "ibm, nmi-interlock" RTAS calls, Aravinda Prasad, 2019/08/30
- [Qemu-devel] [PATCH v12 6/6] migration: Include migration support for machine check handling, Aravinda Prasad, 2019/08/30