[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH] block: posix: Always allocate the first block
From: |
Nir Soffer |
Subject: |
Re: [Qemu-devel] [PATCH] block: posix: Always allocate the first block |
Date: |
Thu, 22 Aug 2019 14:30:36 +0300 |
Max, did you have time to look at this?
On Sat, Aug 17, 2019 at 12:21 AM Nir Soffer <address@hidden> wrote:
> When creating an image with preallocation "off" or "falloc", the first
> block of the image is typically not allocated. When using Gluster
> storage backed by XFS filesystem, reading this block using direct I/O
> succeeds regardless of request length, fooling alignment detection.
>
> In this case we fallback to a safe value (4096) instead of the optimal
> value (512), which may lead to unneeded data copying when aligning
> requests. Allocating the first block avoids the fallback.
>
> When using preallocation=off, we always allocate at least one filesystem
> block:
>
> $ ./qemu-img create -f raw test.raw 1g
> Formatting 'test.raw', fmt=raw size=1073741824
>
> $ ls -lhs test.raw
> 4.0K -rw-r--r--. 1 nsoffer nsoffer 1.0G Aug 16 23:48 test.raw
>
> I did quick performance tests for these flows:
> - Provisioning a VM with a new raw image.
> - Copying disks with qemu-img convert to new raw target image
>
> I installed Fedora 29 server on raw sparse image, measuring the time
> from clicking "Begin installation" until the "Reboot" button appears:
>
> Before(s) After(s) Diff(%)
> -------------------------------
> 356 389 +8.4
>
> I ran this only once, so we cannot tell much from these results.
>
> The second test was cloning the installation image with qemu-img
> convert, doing 10 runs:
>
> for i in $(seq 10); do
> rm -f dst.raw
> sleep 10
> time ./qemu-img convert -f raw -O raw -t none -T none src.raw
> dst.raw
> done
>
> Here is a table comparing the total time spent:
>
> Type Before(s) After(s) Diff(%)
> ---------------------------------------
> real 530.028 469.123 -11.4
> user 17.204 10.768 -37.4
> sys 17.881 7.011 -60.7
>
> Here we see very clear improvement in CPU usage.
>
> Signed-off-by: Nir Soffer <address@hidden>
> ---
> block/file-posix.c | 25 +++++++++++++++++++++++++
> tests/qemu-iotests/150.out | 1 +
> tests/qemu-iotests/160 | 4 ++++
> tests/qemu-iotests/175 | 19 +++++++++++++------
> tests/qemu-iotests/175.out | 8 ++++----
> tests/qemu-iotests/221.out | 12 ++++++++----
> tests/qemu-iotests/253.out | 12 ++++++++----
> 7 files changed, 63 insertions(+), 18 deletions(-)
>
> diff --git a/block/file-posix.c b/block/file-posix.c
> index b9c33c8f6c..3964dd2021 100644
> --- a/block/file-posix.c
> +++ b/block/file-posix.c
> @@ -1755,6 +1755,27 @@ static int handle_aiocb_discard(void *opaque)
> return ret;
> }
>
> +/*
> + * Help alignment detection by allocating the first block.
> + *
> + * When reading with direct I/O from unallocated area on Gluster backed
> by XFS,
> + * reading succeeds regardless of request length. In this case we
> fallback to
> + * safe aligment which is not optimal. Allocating the first block avoids
> this
> + * fallback.
> + *
> + * Returns: 0 on success, -errno on failure.
> + */
> +static int allocate_first_block(int fd)
> +{
> + ssize_t n;
> +
> + do {
> + n = pwrite(fd, "\0", 1, 0);
> + } while (n == -1 && errno == EINTR);
> +
> + return (n == -1) ? -errno : 0;
> +}
> +
> static int handle_aiocb_truncate(void *opaque)
> {
> RawPosixAIOData *aiocb = opaque;
> @@ -1794,6 +1815,8 @@ static int handle_aiocb_truncate(void *opaque)
> /* posix_fallocate() doesn't set errno. */
> error_setg_errno(errp, -result,
> "Could not preallocate new data");
> + } else if (current_length == 0) {
> + allocate_first_block(fd);
> }
> } else {
> result = 0;
> @@ -1855,6 +1878,8 @@ static int handle_aiocb_truncate(void *opaque)
> if (ftruncate(fd, offset) != 0) {
> result = -errno;
> error_setg_errno(errp, -result, "Could not resize file");
> + } else if (current_length == 0 && offset > current_length) {
> + allocate_first_block(fd);
> }
> return result;
> default:
> diff --git a/tests/qemu-iotests/150.out b/tests/qemu-iotests/150.out
> index 2a54e8dcfa..3cdc7727a5 100644
> --- a/tests/qemu-iotests/150.out
> +++ b/tests/qemu-iotests/150.out
> @@ -3,6 +3,7 @@ QA output created by 150
> === Mapping sparse conversion ===
>
> Offset Length File
> +0 0x1000 TEST_DIR/t.IMGFMT
>
> === Mapping non-sparse conversion ===
>
> diff --git a/tests/qemu-iotests/160 b/tests/qemu-iotests/160
> index df89d3864b..ad2d054a47 100755
> --- a/tests/qemu-iotests/160
> +++ b/tests/qemu-iotests/160
> @@ -57,6 +57,10 @@ for skip in $TEST_SKIP_BLOCKS; do
> $QEMU_IMG dd if="$TEST_IMG" of="$TEST_IMG.out" skip="$skip" -O
> "$IMGFMT" \
> 2> /dev/null
> TEST_IMG="$TEST_IMG.out" _check_test_img
> +
> + # We always write the first byte of an image.
> + printf "\0" > "$TEST_IMG.out.dd"
> +
> dd if="$TEST_IMG" of="$TEST_IMG.out.dd" skip="$skip" status=none
>
> echo
> diff --git a/tests/qemu-iotests/175 b/tests/qemu-iotests/175
> index 51e62c8276..c6a3a7bb1e 100755
> --- a/tests/qemu-iotests/175
> +++ b/tests/qemu-iotests/175
> @@ -37,14 +37,16 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
> # the file size. This function hides the resulting difference in the
> # stat -c '%b' output.
> # Parameter 1: Number of blocks an empty file occupies
> -# Parameter 2: Image size in bytes
> +# Parameter 2: Minimal number of blocks in an image
> +# Parameter 3: Image size in bytes
> _filter_blocks()
> {
> extra_blocks=$1
> - img_size=$2
> + min_blocks=$2
> + img_size=$3
>
> - sed -e "s/blocks=$extra_blocks\\(\$\\|[^0-9]\\)/nothing allocated/" \
> - -e "s/blocks=$((extra_blocks + img_size /
> 512))\\(\$\\|[^0-9]\\)/everything allocated/"
> + sed -e "s/blocks=$((extra_blocks + min_blocks))\\(\$\\|[^0-9]\\)/min
> allocation/" \
> + -e "s/blocks=$((extra_blocks + img_size /
> 512))\\(\$\\|[^0-9]\\)/max allocation/"
> }
>
> # get standard environment, filters and checks
> @@ -60,16 +62,21 @@ size=$((1 * 1024 * 1024))
> touch "$TEST_DIR/empty"
> extra_blocks=$(stat -c '%b' "$TEST_DIR/empty")
>
> +# We always write the first byte; check how many blocks this filesystem
> +# allocates to match empty image alloation.
> +printf "\0" > "$TEST_DIR/empty"
> +min_blocks=$(stat -c '%b' "$TEST_DIR/empty")
> +
> echo
> echo "== creating image with default preallocation =="
> _make_test_img $size | _filter_imgfmt
> -stat -c "size=%s, blocks=%b" $TEST_IMG | _filter_blocks $extra_blocks
> $size
> +stat -c "size=%s, blocks=%b" $TEST_IMG | _filter_blocks $extra_blocks
> $min_blocks $size
>
> for mode in off full falloc; do
> echo
> echo "== creating image with preallocation $mode =="
> IMGOPTS=preallocation=$mode _make_test_img $size | _filter_imgfmt
> - stat -c "size=%s, blocks=%b" $TEST_IMG | _filter_blocks $extra_blocks
> $size
> + stat -c "size=%s, blocks=%b" $TEST_IMG | _filter_blocks $extra_blocks
> $min_blocks $size
> done
>
> # success, all done
> diff --git a/tests/qemu-iotests/175.out b/tests/qemu-iotests/175.out
> index 6d9a5ed84e..263e521262 100644
> --- a/tests/qemu-iotests/175.out
> +++ b/tests/qemu-iotests/175.out
> @@ -2,17 +2,17 @@ QA output created by 175
>
> == creating image with default preallocation ==
> Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576
> -size=1048576, nothing allocated
> +size=1048576, min allocation
>
> == creating image with preallocation off ==
> Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 preallocation=off
> -size=1048576, nothing allocated
> +size=1048576, min allocation
>
> == creating image with preallocation full ==
> Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 preallocation=full
> -size=1048576, everything allocated
> +size=1048576, max allocation
>
> == creating image with preallocation falloc ==
> Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576
> preallocation=falloc
> -size=1048576, everything allocated
> +size=1048576, max allocation
> *** done
> diff --git a/tests/qemu-iotests/221.out b/tests/qemu-iotests/221.out
> index 9f9dd52bb0..dca024a0c3 100644
> --- a/tests/qemu-iotests/221.out
> +++ b/tests/qemu-iotests/221.out
> @@ -3,14 +3,18 @@ QA output created by 221
> === Check mapping of unaligned raw image ===
>
> Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=65537
> -[{ "start": 0, "length": 66048, "depth": 0, "zero": true, "data": false,
> "offset": OFFSET}]
> -[{ "start": 0, "length": 66048, "depth": 0, "zero": true, "data": false,
> "offset": OFFSET}]
> +[{ "start": 0, "length": 4096, "depth": 0, "zero": false, "data": true,
> "offset": OFFSET},
> +{ "start": 4096, "length": 61952, "depth": 0, "zero": true, "data":
> false, "offset": OFFSET}]
> +[{ "start": 0, "length": 4096, "depth": 0, "zero": false, "data": true,
> "offset": OFFSET},
> +{ "start": 4096, "length": 61952, "depth": 0, "zero": true, "data":
> false, "offset": OFFSET}]
> wrote 1/1 bytes at offset 65536
> 1 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> -[{ "start": 0, "length": 65536, "depth": 0, "zero": true, "data": false,
> "offset": OFFSET},
> +[{ "start": 0, "length": 4096, "depth": 0, "zero": false, "data": true,
> "offset": OFFSET},
> +{ "start": 4096, "length": 61440, "depth": 0, "zero": true, "data":
> false, "offset": OFFSET},
> { "start": 65536, "length": 1, "depth": 0, "zero": false, "data": true,
> "offset": OFFSET},
> { "start": 65537, "length": 511, "depth": 0, "zero": true, "data": false,
> "offset": OFFSET}]
> -[{ "start": 0, "length": 65536, "depth": 0, "zero": true, "data": false,
> "offset": OFFSET},
> +[{ "start": 0, "length": 4096, "depth": 0, "zero": false, "data": true,
> "offset": OFFSET},
> +{ "start": 4096, "length": 61440, "depth": 0, "zero": true, "data":
> false, "offset": OFFSET},
> { "start": 65536, "length": 1, "depth": 0, "zero": false, "data": true,
> "offset": OFFSET},
> { "start": 65537, "length": 511, "depth": 0, "zero": true, "data": false,
> "offset": OFFSET}]
> *** done
> diff --git a/tests/qemu-iotests/253.out b/tests/qemu-iotests/253.out
> index 607c0baa0b..3d08b305d7 100644
> --- a/tests/qemu-iotests/253.out
> +++ b/tests/qemu-iotests/253.out
> @@ -3,12 +3,16 @@ QA output created by 253
> === Check mapping of unaligned raw image ===
>
> Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048575
> -[{ "start": 0, "length": 1048576, "depth": 0, "zero": true, "data":
> false, "offset": OFFSET}]
> -[{ "start": 0, "length": 1048576, "depth": 0, "zero": true, "data":
> false, "offset": OFFSET}]
> +[{ "start": 0, "length": 4096, "depth": 0, "zero": false, "data": true,
> "offset": OFFSET},
> +{ "start": 4096, "length": 1044480, "depth": 0, "zero": true, "data":
> false, "offset": OFFSET}]
> +[{ "start": 0, "length": 4096, "depth": 0, "zero": false, "data": true,
> "offset": OFFSET},
> +{ "start": 4096, "length": 1044480, "depth": 0, "zero": true, "data":
> false, "offset": OFFSET}]
> wrote 65535/65535 bytes at offset 983040
> 63.999 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> -[{ "start": 0, "length": 983040, "depth": 0, "zero": true, "data": false,
> "offset": OFFSET},
> +[{ "start": 0, "length": 4096, "depth": 0, "zero": false, "data": true,
> "offset": OFFSET},
> +{ "start": 4096, "length": 978944, "depth": 0, "zero": true, "data":
> false, "offset": OFFSET},
> { "start": 983040, "length": 65536, "depth": 0, "zero": false, "data":
> true, "offset": OFFSET}]
> -[{ "start": 0, "length": 983040, "depth": 0, "zero": true, "data": false,
> "offset": OFFSET},
> +[{ "start": 0, "length": 4096, "depth": 0, "zero": false, "data": true,
> "offset": OFFSET},
> +{ "start": 4096, "length": 978944, "depth": 0, "zero": true, "data":
> false, "offset": OFFSET},
> { "start": 983040, "length": 65536, "depth": 0, "zero": false, "data":
> true, "offset": OFFSET}]
> *** done
> --
> 2.20.1
>
>
- [Qemu-devel] [PATCH] block: posix: Always allocate the first block, Nir Soffer, 2019/08/16
- Re: [Qemu-devel] [Qemu-block] [PATCH] block: posix: Always allocate the first block, John Snow, 2019/08/16
- Re: [Qemu-devel] [PATCH] block: posix: Always allocate the first block,
Nir Soffer <=
- Re: [Qemu-devel] [PATCH] block: posix: Always allocate the first block, Max Reitz, 2019/08/22
- Re: [Qemu-devel] [PATCH] block: posix: Always allocate the first block, Nir Soffer, 2019/08/22
- Re: [Qemu-devel] [PATCH] block: posix: Always allocate the first block, Max Reitz, 2019/08/22
- Re: [Qemu-devel] [PATCH] block: posix: Always allocate the first block, Nir Soffer, 2019/08/22
- Re: [Qemu-devel] [PATCH] block: posix: Always allocate the first block, Max Reitz, 2019/08/23
- Re: [Qemu-devel] [PATCH] block: posix: Always allocate the first block, Nir Soffer, 2019/08/23
- Re: [Qemu-devel] [PATCH] block: posix: Always allocate the first block, Max Reitz, 2019/08/23
- Re: [Qemu-devel] [PATCH] block: posix: Always allocate the first block, Nir Soffer, 2019/08/23
- Re: [Qemu-devel] [PATCH] block: posix: Always allocate the first block, Max Reitz, 2019/08/23
- Re: [Qemu-devel] [PATCH] block: posix: Always allocate the first block, Nir Soffer, 2019/08/24