Re: [Qemu-devel] [PATCH v3 7/8] hw/misc: Add a config switch for the "unimplemented" device

[Philippe Mathieu-Daudé]

On 8/17/19 12:19 PM, Thomas Huth wrote:
> The device is only used by some few boards. Let's use a proper Kconfig
> switch so that we only compile this code if we really need it.
> 
> Signed-off-by: Thomas Huth <address@hidden>

Reviewed-by: Philippe Mathieu-Daudé <address@hidden>

> ---
>  hw/arm/Kconfig        | 11 +++++++++++
>  hw/microblaze/Kconfig |  1 +
>  hw/misc/Kconfig       |  3 +++
>  hw/misc/Makefile.objs |  2 +-
>  hw/sparc64/Kconfig    |  1 +
>  5 files changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index 6e24c73b54..76a2a6bcbf 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -82,6 +82,7 @@ config MUSCA
>      select PL011
>      select PL031
>      select SPLIT_IRQ
> +    select UNIMP
>  
>  config MUSICPAL
>      bool
> @@ -217,6 +218,7 @@ config STELLARIS
>      select SSI_SD
>      select STELLARIS_INPUT
>      select STELLARIS_ENET # ethernet
> +    select UNIMP
>  
>  config STRONGARM
>      bool
> @@ -283,6 +285,7 @@ config ALLWINNER_A10
>      select ALLWINNER_A10_PIC
>      select ALLWINNER_EMAC
>      select SERIAL
> +    select UNIMP
>  
>  config RASPI
>      bool
> @@ -320,6 +323,7 @@ config XLNX_VERSAL
>      select PL011
>      select CADENCE
>      select VIRTIO_MMIO
> +    select UNIMP
>  
>  config FSL_IMX25
>      bool
> @@ -355,6 +359,7 @@ config ASPEED_SOC
>      select SSI_M25P80
>      select TMP105
>      select TMP421
> +    select UNIMP
>  
>  config MPS2
>      bool
> @@ -366,6 +371,7 @@ config MPS2
>      select PL022    # Serial port
>      select PL080    # DMA controller
>      select SPLIT_IRQ
> +    select UNIMP
>  
>  config FSL_IMX7
>      bool
> @@ -378,6 +384,7 @@ config FSL_IMX7
>      select IMX_I2C
>      select PCI_EXPRESS_DESIGNWARE
>      select SDHCI
> +    select UNIMP
>  
>  config ARM_SMMUV3
>      bool
> @@ -389,6 +396,7 @@ config FSL_IMX6UL
>      select IMX_FEC
>      select IMX_I2C
>      select SDHCI
> +    select UNIMP
>  
>  config MICROBIT
>      bool
> @@ -398,6 +406,7 @@ config NRF51_SOC
>      bool
>      select I2C
>      select ARM_V7M
> +    select UNIMP
>  
>  config EMCRAFT_SF2
>      bool
> @@ -410,6 +419,7 @@ config MSF2
>      select PTIMER
>      select SERIAL
>      select SSI
> +    select UNIMP
>  
>  config ZAURUS
>      bool
> @@ -448,6 +458,7 @@ config ARMSSE
>      select TZ_MPC
>      select TZ_MSC
>      select TZ_PPC
> +    select UNIMP
>  
>  config ARMSSE_CPUID
>      bool
> diff --git a/hw/microblaze/Kconfig b/hw/microblaze/Kconfig
> index c4dc120973..e2697ced9c 100644
> --- a/hw/microblaze/Kconfig
> +++ b/hw/microblaze/Kconfig
> @@ -4,6 +4,7 @@ config PETALOGIX_S3ADSP1800
>      select XILINX
>      select XILINX_AXI
>      select XILINX_ETHLITE
> +    select UNIMP
>  
>  config PETALOGIX_ML605
>      bool
> diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
> index 385e1b0cec..51754bb47c 100644
> --- a/hw/misc/Kconfig
> +++ b/hw/misc/Kconfig
> @@ -117,4 +117,7 @@ config AUX
>      bool
>      select I2C
>  
> +config UNIMP
> +    bool
> +
>  source macio/Kconfig
> diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
> index e9aab519a1..e4aad707fb 100644
> --- a/hw/misc/Makefile.objs
> +++ b/hw/misc/Makefile.objs
> @@ -9,7 +9,7 @@ common-obj-$(CONFIG_PCI_TESTDEV) += pci-testdev.o
>  common-obj-$(CONFIG_EDU) += edu.o
>  common-obj-$(CONFIG_PCA9552) += pca9552.o
>  
> -common-obj-y += unimp.o
> +common-obj-$(CONFIG_UNIMP) += unimp.o
>  common-obj-$(CONFIG_FW_CFG_DMA) += vmcoreinfo.o
>  
>  # ARM devices
> diff --git a/hw/sparc64/Kconfig b/hw/sparc64/Kconfig
> index d4d76a89be..f9f8b0f73a 100644
> --- a/hw/sparc64/Kconfig
> +++ b/hw/sparc64/Kconfig
> @@ -17,3 +17,4 @@ config NIAGARA
>      bool
>      select EMPTY_SLOT
>      select SUN4V_RTC
> +    select UNIMP
>