[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v4 5/6] m68k: Add serial controller to the NeXTc
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [Qemu-devel] [PATCH v4 5/6] m68k: Add serial controller to the NeXTcube machine |
Date: |
Tue, 13 Aug 2019 12:26:53 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.7.0 |
On 7/9/19 9:32 AM, Thomas Huth wrote:
> The NeXTcube uses a normal 8530 serial controller, so we can simply use
> our normal "escc" device here.
> While we're at it, also add a boot-serial-test for the next-cube machine,
> now that the serial output works.
>
> Signed-off-by: Thomas Huth <address@hidden>
Tested-by: Philippe Mathieu-Daudé <address@hidden>
> ---
> hw/m68k/Kconfig | 1 +
> hw/m68k/next-cube.c | 37 ++++++++++++++++++++++++++++++++++++-
> tests/boot-serial-test.c | 12 ++++++++++++
> 3 files changed, 49 insertions(+), 1 deletion(-)
>
> diff --git a/hw/m68k/Kconfig b/hw/m68k/Kconfig
> index ec58a2eb06..a74fac5abd 100644
> --- a/hw/m68k/Kconfig
> +++ b/hw/m68k/Kconfig
> @@ -11,3 +11,4 @@ config MCF5208
> config NEXTCUBE
> bool
> select FRAMEBUFFER
> + select ESCC
> diff --git a/hw/m68k/next-cube.c b/hw/m68k/next-cube.c
> index 0737605417..b7f1e9106b 100644
> --- a/hw/m68k/next-cube.c
> +++ b/hw/m68k/next-cube.c
> @@ -846,6 +846,39 @@ void next_irq(void *opaque, int number, int level)
> }
> }
>
> +static void next_serial_irq(void *opaque, int n, int level)
> +{
> + /* DPRINTF("SCC IRQ NUM %i\n",n); */
> + if (n) {
> + next_irq(opaque, NEXT_SCC_DMA_I, level);
> + } else {
> + next_irq(opaque, NEXT_SCC_I, level);
> + }
> +}
> +
> +static void next_escc_init(M68kCPU *cpu)
> +{
> + qemu_irq *ser_irq = qemu_allocate_irqs(next_serial_irq, cpu, 2);
> + DeviceState *dev;
> + SysBusDevice *s;
> +
> + dev = qdev_create(NULL, TYPE_ESCC);
> + qdev_prop_set_uint32(dev, "disabled", 0);
> + qdev_prop_set_uint32(dev, "frequency", 9600 * 384);
> + qdev_prop_set_uint32(dev, "it_shift", 0);
> + qdev_prop_set_bit(dev, "bit_swap", true);
> + qdev_prop_set_chr(dev, "chrB", serial_hd(1));
> + qdev_prop_set_chr(dev, "chrA", serial_hd(0));
> + qdev_prop_set_uint32(dev, "chnBtype", escc_serial);
> + qdev_prop_set_uint32(dev, "chnAtype", escc_serial);
> + qdev_init_nofail(dev);
> +
> + s = SYS_BUS_DEVICE(dev);
> + sysbus_connect_irq(s, 0, ser_irq[0]);
> + sysbus_connect_irq(s, 1, ser_irq[1]);
> + sysbus_mmio_map(s, 0, 0x2118000);
> +}
> +
> static void next_cube_init(MachineState *machine)
> {
> M68kCPU *cpu;
> @@ -937,8 +970,10 @@ static void next_cube_init(MachineState *machine)
> }
> }
>
> - /* TODO: */
> /* Serial */
> + next_escc_init(cpu);
> +
> + /* TODO: */
> /* Network */
> /* SCSI */
>
> diff --git a/tests/boot-serial-test.c b/tests/boot-serial-test.c
> index 24852d4c7d..c8ded1195e 100644
> --- a/tests/boot-serial-test.c
> +++ b/tests/boot-serial-test.c
> @@ -24,6 +24,17 @@ static const uint8_t kernel_mcf5208[] = {
> 0x60, 0xfa /* bra.s loop */
> };
>
> +static const uint8_t bios_nextcube[] = {
> + 0x06, 0x00, 0x00, 0x00, /* Initial SP */
> + 0x01, 0x00, 0x00, 0x08, /* Initial PC */
> + 0x41, 0xf9, 0x02, 0x11, 0x80, 0x00, /* lea 0x02118000,%a0 */
> + 0x10, 0x3c, 0x00, 0x54, /* move.b #'T',%d0 */
> + 0x11, 0x7c, 0x00, 0x05, 0x00, 0x01, /* move.b #5,1(%a0) Sel
> TXCTRL */
> + 0x11, 0x7c, 0x00, 0x68, 0x00, 0x01, /* move.b #0x68,1(%a0) Enable TX
> */
> + 0x11, 0x40, 0x00, 0x03, /* move.b %d0,3(%a0) Print 'T'
> */
> + 0x60, 0xfa /* bra.s loop */
> +};
> +
> static const uint8_t kernel_pls3adsp1800[] = {
> 0xb0, 0x00, 0x84, 0x00, /* imm 0x8400 */
> 0x30, 0x60, 0x00, 0x04, /* addik r3,r0,4 */
> @@ -116,6 +127,7 @@ static testdef_t tests[] = {
> { "sparc64", "sun4u", "", "UltraSPARC" },
> { "s390x", "s390-ccw-virtio", "", "device" },
> { "m68k", "mcf5208evb", "", "TT", sizeof(kernel_mcf5208), kernel_mcf5208
> },
> + { "m68k", "next-cube", "", "TT", sizeof(bios_nextcube), 0, bios_nextcube
> },
> { "microblaze", "petalogix-s3adsp1800", "", "TT",
> sizeof(kernel_pls3adsp1800), kernel_pls3adsp1800 },
> { "microblazeel", "petalogix-ml605", "", "TT",
>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-devel] [PATCH v4 5/6] m68k: Add serial controller to the NeXTcube machine,
Philippe Mathieu-Daudé <=