[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 2/7] hw/mips: Express dependencies of the Jaz
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [Qemu-devel] [PATCH v3 2/7] hw/mips: Express dependencies of the Jazz machine with Kconfig |
Date: |
Mon, 11 Mar 2019 12:37:32 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.5.1 |
Hi Thomas,
On 3/11/19 12:17 PM, Thomas Huth wrote:
> On 11/03/2019 01.56, Philippe Mathieu-Daudé wrote:
>> The Jazz use the RC4030 Asic to provide an EISA bus and DMA/IRQ. The
>> framebuffer display is managed by a G364, the network card is a Sonic
>> DP83932. A QLogic ESP216 provides a SCSI bus.
>>
>> Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
>> ---
>> v3: Keep CONFIG_JAZZ in default-configs/mips64el-softmmu.mak (Thomas)
>> ---
>> default-configs/mips-softmmu-common.mak | 1 -
>> default-configs/mips64-softmmu.mak | 5 -----
>> default-configs/mips64el-softmmu.mak | 5 -----
>> hw/mips/Kconfig | 17 +++++++++++++++++
>> 4 files changed, 17 insertions(+), 11 deletions(-)
>>
>> diff --git a/default-configs/mips-softmmu-common.mak
>> b/default-configs/mips-softmmu-common.mak
>> index 8c5fdf5ee1..caebafd416 100644
>> --- a/default-configs/mips-softmmu-common.mak
>> +++ b/default-configs/mips-softmmu-common.mak
>> @@ -3,7 +3,6 @@
>> CONFIG_ISA_BUS=y
>> CONFIG_PCI=y
>> CONFIG_PCI_DEVICES=y
>> -CONFIG_ESP=y
>> CONFIG_VGA_ISA=y
>> CONFIG_VGA_ISA_MM=y
>> CONFIG_VGA_CIRRUS=y
>> diff --git a/default-configs/mips64-softmmu.mak
>> b/default-configs/mips64-softmmu.mak
>> index bad7496672..a169738635 100644
>> --- a/default-configs/mips64-softmmu.mak
>> +++ b/default-configs/mips64-softmmu.mak
>> @@ -1,9 +1,4 @@
>> # Default configuration for mips64-softmmu
>>
>> include mips-softmmu-common.mak
>> -CONFIG_RC4030=y
>> -CONFIG_DP8393X=y
>> -CONFIG_DS1225Y=y
>> CONFIG_JAZZ=y
>> -CONFIG_G364FB=y
>> -CONFIG_JAZZ_LED=y
>> diff --git a/default-configs/mips64el-softmmu.mak
>> b/default-configs/mips64el-softmmu.mak
>> index 8b255efc54..a7b88318b2 100644
>> --- a/default-configs/mips64el-softmmu.mak
>> +++ b/default-configs/mips64el-softmmu.mak
>> @@ -2,13 +2,8 @@
>>
>> include mips-softmmu-common.mak
>> CONFIG_IDE_VIA=y
>> -CONFIG_RC4030=y
>> -CONFIG_DP8393X=y
>> -CONFIG_DS1225Y=y
>> CONFIG_FULONG=y
>> CONFIG_JAZZ=y
>> -CONFIG_G364FB=y
>> -CONFIG_JAZZ_LED=y
>> CONFIG_VT82C686=y
>> CONFIG_AHCI=y
>> CONFIG_MIPS_BOSTON=y
>> diff --git a/hw/mips/Kconfig b/hw/mips/Kconfig
>> index 3433e97e1a..ab006477c7 100644
>> --- a/hw/mips/Kconfig
>> +++ b/hw/mips/Kconfig
>> @@ -12,6 +12,23 @@ config MIPSSIM
>>
>> config JAZZ
>> bool
>> + select ISA_BUS
>> + select RC4030
>> + select I8259
>> + select I8254
>> + select I8257
>> + select PCSPK
>> + select VGA_ISA_MM
>> + select G364FB
>> + select DP8393X
>
> Looking at the code, it seems like you can also run the machine with
> "-net none", so I'd rather use "imply DP8393X" here instead.
Well here I'm not sure.
For the both machine variants (PICA-61 and Magnum 4000), the chipset is
soldered on the board, and is MMIO mapped (via a ChipSelect, no via a
bus you can plug/unplug). So it looks the code inherited habits from
boards having network card via busses.
Not sure the code can be fixed in time for soft freeze.
I might improve the commit message explaining this chipset is soldered
on the board.
Regards,
Phil.
- [Qemu-devel] [PATCH v3 0/7] Kconfig dependencies for MIPS machines (but Malta), Philippe Mathieu-Daudé, 2019/03/10
- [Qemu-devel] [PATCH v3 3/7] hw/mips: Express dependencies of the r4k platform with Kconfig, Philippe Mathieu-Daudé, 2019/03/10
- [Qemu-devel] [PATCH v3 4/7] hw/mips: Remove the redundant CONFIG_MIPS_ITU Makefile variable, Philippe Mathieu-Daudé, 2019/03/10
- [Qemu-devel] [PATCH v3 5/7] hw/mips: Express dependencies of the Boston machine with Kconfig, Philippe Mathieu-Daudé, 2019/03/10
- [Qemu-devel] [PATCH v3 6/7] hw/pci-host: Use CONFIG_PCI_BONITO to select the Bonito North Bridge, Philippe Mathieu-Daudé, 2019/03/10