[Qemu-devel] [PATCH v5 5/6] xlnx-zynqmp: Connect the SPI devices

[Alistair Francis]

Connect the Xilinx SPI devices to the ZynqMP model.

Signed-off-by: Alistair Francis <address@hidden>
---
V5:
 - Use the bus renaming function
V4:
 - Rename the SPI busses so that they can all be accessed from the SoC
 - Don't set the num-busses property
V3:
 - Expose the SPI Bus as part of the SoC device
V2:
 - Don't connect the SPI flash to the SoC

 hw/arm/xlnx-zynqmp.c         | 38 ++++++++++++++++++++++++++++++++++++++
 include/hw/arm/xlnx-zynqmp.h |  3 +++
 2 files changed, 41 insertions(+)

diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 87553bb..bce935d 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -56,6 +56,14 @@ static const int sdhci_intr[XLNX_ZYNQMP_NUM_SDHCI] = {
     48, 49,
 };
 
+static const uint64_t spi_addr[XLNX_ZYNQMP_NUM_SPIS] = {
+    0xFF040000, 0xFF050000,
+};
+
+static const int spi_intr[XLNX_ZYNQMP_NUM_SPIS] = {
+    19, 20,
+};
+
 typedef struct XlnxZynqMPGICRegion {
     int region_index;
     uint32_t address;
@@ -112,6 +120,12 @@ static void xlnx_zynqmp_init(Object *obj)
         qdev_set_parent_bus(DEVICE(&s->sdhci[i]),
                             sysbus_get_default());
     }
+
+    for (i = 0; i < XLNX_ZYNQMP_NUM_SPIS; i++) {
+        object_initialize(&s->spi[i], sizeof(s->spi[i]),
+                          TYPE_XILINX_SPIPS);
+        qdev_set_parent_bus(DEVICE(&s->spi[i]), sysbus_get_default());
+    }
 }
 
 static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
@@ -286,6 +300,30 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error 
**errp)
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci[i]), 0,
                            gic_spi[sdhci_intr[i]]);
     }
+
+    for (i = 0; i < XLNX_ZYNQMP_NUM_SPIS; i++) {
+        BusState *spi_bus;
+        char bus_name[6];
+
+        object_property_set_bool(OBJECT(&s->spi[i]), true, "realized", &err);
+
+        sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]);
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
+                           gic_spi[spi_intr[i]]);
+
+        /* Rename each SPI bus after the SPI device to allow the board
+         * to access all of the busses from the SoC.
+         */
+        spi_bus = qdev_get_child_bus(DEVICE(&s->spi[i]), "spi0");
+        snprintf(bus_name, 6, "spi%d", i);
+        qdev_bus_rename(spi_bus, bus_name);
+
+        /* Add the SPI buses to the SoC child bus */
+        /* FIXME: This causes the later buses to be duplicated in
+         * the SPI devices printout when running qtre.
+         */
+        QLIST_INSERT_HEAD(&dev->child_bus, spi_bus, sibling);
+    }
 }
 
 static Property xlnx_zynqmp_props[] = {
diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
index d116092..f598a43 100644
--- a/include/hw/arm/xlnx-zynqmp.h
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -25,6 +25,7 @@
 #include "hw/ide/pci.h"
 #include "hw/ide/ahci.h"
 #include "hw/sd/sdhci.h"
+#include "hw/ssi/xilinx_spips.h"
 
 #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp"
 #define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \
@@ -35,6 +36,7 @@
 #define XLNX_ZYNQMP_NUM_GEMS 4
 #define XLNX_ZYNQMP_NUM_UARTS 2
 #define XLNX_ZYNQMP_NUM_SDHCI 2
+#define XLNX_ZYNQMP_NUM_SPIS 2
 
 #define XLNX_ZYNQMP_NUM_OCM_BANKS 4
 #define XLNX_ZYNQMP_OCM_RAM_0_ADDRESS 0xFFFC0000
@@ -66,6 +68,7 @@ typedef struct XlnxZynqMPState {
     CadenceUARTState uart[XLNX_ZYNQMP_NUM_UARTS];
     SysbusAHCIState sata;
     SDHCIState sdhci[XLNX_ZYNQMP_NUM_SDHCI];
+    XilinxSPIPS spi[XLNX_ZYNQMP_NUM_SPIS];
 
     char *boot_cpu;
     ARMCPU *boot_cpu_ptr;
-- 
2.5.0