Re: [Qemu-devel] [PATCH for-2.5 30/30] m68k: add bitfield instructions

[Richard Henderson]

On 08/09/2015 01:13 PM, Laurent Vivier wrote:
>  uint32_t HELPER(rol32)(uint32_t val, uint32_t shift)
>  {
>      uint32_t result;
> @@ -1227,6 +1241,53 @@ void HELPER(set_mac_extu)(CPUM68KState *env, uint32_t 
> val, uint32_t acc)
>      env->macc[acc + 1] = res;
>  }
>  
> +/* load from a bitfield */
> +
> +uint64_t HELPER(bitfield_load)(uint32_t addr, uint32_t offset, uint32_t 
> width)
> +{
> +    uint8_t data[8];
> +    uint64_t bitfield;
> +    int size;
> +    int i;
> +
> +    size = (offset + width + 7) >> 3;
> +#if defined(CONFIG_USER_ONLY)
> +    cpu_memory_rw_debug(NULL, (target_ulong)addr, data, size, 0);
> +#else
> +    cpu_physical_memory_rw(addr, data, size, 0);
> +#endif

Err, this bypasses virtual memory.  Definitely not correct.

You'll need to use cpu_ld*_data instead.

> +DISAS_INSN(bitfield_reg)
> +{
> +    uint16_t ext;
> +    TCGv tmp;
> +    TCGv tmp1;
> +    TCGv reg;
> +    TCGv offset;
> +    TCGv width;
> +    int op;
> +    TCGv reg2;
> +    TCGv mask;
> +
> +    reg = DREG(insn, 0);
> +    op = (insn >> 8) & 7;
> +    ext = read_im16(env, s);
> +
> +    bitfield_param(ext, &offset, &width, &mask);
> +
> +    if (ext & 0x0800) {
> +        tcg_gen_andi_i32(offset, offset, 31);
> +    }
> +    gen_helper_ror32(mask, mask, offset);

Ah, the curious unused helpers.  Anyway, tcg_gen_rotr_i32.

Anyway, there's so much redundant computation in here let's name some
sub-expressions, and give them their own temporaries.  Let the tcg optimizer do
its job if they turn out to be unused for a specific case.

  mask_msb = mask before the rotate (at msb).
  mask_inp = mask after the rotate (in place).

> +    tmp = tcg_temp_new_i32();
> +    tcg_gen_and_i32(tmp, reg, mask);

  oldf_inp = tmp (old field in place).

> +
> +    tmp1 = tcg_temp_new_i32();
> +    gen_helper_rol32(tmp1, tmp, offset);

  oldf_msb = tmp1 (old field at msb).

> +        tcg_gen_sub_i32(tmp2, tcg_const_i32(32), width);

  comp_width = tmp2 (compliment of width).

Use tcg_gen_subfi so you won't leak the const.
Compute this once for all of the sub-cases.

> +    switch (op) {
> +    case 0: /* bftst */
> +        break;
> +    case 1: /* bfextu */
> +        tcg_gen_add_i32(tmp1, offset, width);
> +        tcg_gen_andi_i32(tmp1, tmp1, 31);
> +        gen_helper_rol32(reg2, tmp, tmp1);

  tcg_gen_shr_i32(reg2, oldf_msb, comp_width);

> +        break;
> +    case 2: /* bfchg */
> +        tcg_gen_xor_i32(reg, reg, mask);
> +        break;
> +    case 3: /* bfexts */
> +        gen_helper_rol32(reg2, tmp, offset);
> +        tcg_gen_sub_i32(width, tcg_const_i32(32), width);
> +        tcg_gen_sar_i32(reg2, reg2, width);

  tcg_gen_sar_i32(reg2, oldf_msb, comp_width);

> +    case 4: /* bfclr */
> +        tcg_gen_not_i32(mask, mask);
> +        tcg_gen_and_i32(reg, reg, mask);

  tcg_gen_andc_i32(reg, reg, mask_inp);

> +        break;
> +    case 5: /* bfffo */
> +        gen_helper_rol32(reg2, tmp, offset);
> +        gen_helper_bfffo(tmp, tmp, width);
> +        tcg_gen_add_i32(reg2, tmp, offset);

There's a typo here if you look close.  That said,

  tcg_gen_orc_i32(tmp, oldf_msb, mask_msb);
  gen_helper_clo32(tmp, tmp);
  tcg_gen_add_i32(reg2, tmp, offset);

with

uint32_t helper_clo32(uint32_t x)
{
  return clo32(x);
}

The first opcode sets all bits outside the field, so that (if the field is
smaller than 32 bits) we're guaranteed to find a one.  At which point there's
really very little that needs doing in the helper.

> +    case 6: /* bfset */
> +        tcg_gen_or_i32(reg, reg, mask);
> +        break;

  tcg_gen_or_i32(reg, reg, mask_inp);

> +    case 7: /* bfins */
> +        tcg_gen_shl_i32(tmp1, tcg_const_i32(1), width);

Undefined if width == 32.  That said...

> +        tcg_gen_subi_i32(tmp1, tmp1, 1);
> +        tcg_gen_and_i32(tmp, reg2, tmp1);
> +        tcg_gen_add_i32(tmp1, offset, width);
> +        tcg_gen_andi_i32(tmp1, tmp1, 31);
> +        gen_helper_ror32(tmp, tmp, tmp1);
> +        tcg_gen_not_i32(mask, mask);
> +        tcg_gen_and_i32(reg, reg, mask);
> +        tcg_gen_or_i32(reg, reg, tmp);
> +        break;

  /* Rotate the source so that the field is at msb.  */
  tcg_gen_rotr_i32(tmp, reg2, width);

  /* Isolate the field and set flags.  */
  tcg_gen_and_i32(tmp, tmp, mask_msb);
  gen_logic_cc(s, tmp, OS_LONG);

  /* Rotate the field into position.  */
  tcg_gen_rotr_i32(tmp, tmp, offset);

  /* Merge field into destination.  */
  tcg_gen_andc_i32(reg, reg, mask_inp);
  tcg_gen_or_i32(reg, reg, tmp);
  return;

Handle the non-bfins after the switch with

  gen_logic_cc(s, oldf_msb, OS_LONG);

> +DISAS_INSN(bitfield_mem)
> +{
> +    uint16_t ext;
> +    int op;
> +    TCGv_i64 bitfield;
> +    TCGv_i64 mask_bitfield;
> +    TCGv mask_cc;
> +    TCGv shift;
> +    TCGv val;
> +    TCGv src;
> +    TCGv offset;
> +    TCGv width;
> +    TCGv reg;
> +    TCGv tmp;
> +
> +    op = (insn >> 8) & 7;
> +    ext = read_im16(env, s);
> +    src = gen_lea(env, s, insn, OS_LONG);
> +    if (IS_NULL_QREG(src)) {
> +        gen_addr_fault(s);
> +        return;
> +    }
> +
> +    bitfield_param(ext, &offset, &width, &mask_cc);
> +
> +    /* adjust src and offset */
> +
> +    /* src += offset >> 3; */
> +
> +    tmp = tcg_temp_new_i32();
> +    tcg_gen_shri_i32(tmp, offset, 3);
> +    tcg_gen_add_i32(src, src, tmp);
> +
> +    /* offset &= 7; */
> +
> +    tcg_gen_andi_i32(offset, offset, 7);
> +
> +    /* load */
> +
> +    bitfield = tcg_temp_new_i64();
> +    gen_helper_bitfield_load(bitfield, src, offset, width);

Surely better to load the value from memory such that the field is positioned
at the MSB, share code with bitfield_reg for the actual computation of flags
and result, and then store the value back from the temporary at MSB as needed.


r~