[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 3/5] xen/pass-through: log errno values rather than f
From: |
Stefano Stabellini |
Subject: |
[Qemu-devel] [PULL 3/5] xen/pass-through: log errno values rather than function return ones |
Date: |
Mon, 22 Jun 2015 14:09:09 +0100 |
From: Jan Beulich <address@hidden>
Functions setting errno commonly return just -1, which is of no
particular use in the log file.
Signed-off-by: Jan Beulich <address@hidden>
Reviewed-by: Stefano Stabellini <address@hidden>
---
hw/xen/xen_pt.c | 26 +++++++++++++-------------
hw/xen/xen_pt_msi.c | 24 ++++++++++++------------
2 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/hw/xen/xen_pt.c b/hw/xen/xen_pt.c
index 7b8a31e..329dbd2 100644
--- a/hw/xen/xen_pt.c
+++ b/hw/xen/xen_pt.c
@@ -615,8 +615,8 @@ static void xen_pt_region_update(XenPCIPassthroughState *s,
guest_port, machine_port, size,
op);
if (rc) {
- XEN_PT_ERR(d, "%s ioport mapping failed! (rc: %i)\n",
- adding ? "create new" : "remove old", rc);
+ XEN_PT_ERR(d, "%s ioport mapping failed! (err: %i)\n",
+ adding ? "create new" : "remove old", errno);
}
} else {
pcibus_t guest_addr = sec->offset_within_address_space;
@@ -629,8 +629,8 @@ static void xen_pt_region_update(XenPCIPassthroughState *s,
XEN_PFN(size + XC_PAGE_SIZE - 1),
op);
if (rc) {
- XEN_PT_ERR(d, "%s mem mapping failed! (rc: %i)\n",
- adding ? "create new" : "remove old", rc);
+ XEN_PT_ERR(d, "%s mem mapping failed! (err: %i)\n",
+ adding ? "create new" : "remove old", errno);
}
}
}
@@ -744,8 +744,8 @@ static int xen_pt_initfn(PCIDevice *d)
rc = xc_physdev_map_pirq(xen_xc, xen_domid, machine_irq, &pirq);
if (rc < 0) {
- XEN_PT_ERR(d, "Mapping machine irq %u to pirq %i failed, (rc: %d)\n",
- machine_irq, pirq, rc);
+ XEN_PT_ERR(d, "Mapping machine irq %u to pirq %i failed, (err: %d)\n",
+ machine_irq, pirq, errno);
/* Disable PCI intx assertion (turn on bit10 of devctl) */
cmd |= PCI_COMMAND_INTX_DISABLE;
@@ -766,8 +766,8 @@ static int xen_pt_initfn(PCIDevice *d)
PCI_SLOT(d->devfn),
e_intx);
if (rc < 0) {
- XEN_PT_ERR(d, "Binding of interrupt %i failed! (rc: %d)\n",
- e_intx, rc);
+ XEN_PT_ERR(d, "Binding of interrupt %i failed! (err: %d)\n",
+ e_intx, errno);
/* Disable PCI intx assertion (turn on bit10 of devctl) */
cmd |= PCI_COMMAND_INTX_DISABLE;
@@ -776,7 +776,7 @@ static int xen_pt_initfn(PCIDevice *d)
if (xen_pt_mapped_machine_irq[machine_irq] == 0) {
if (xc_physdev_unmap_pirq(xen_xc, xen_domid, machine_irq)) {
XEN_PT_ERR(d, "Unmapping of machine interrupt %i failed!"
- " (rc: %d)\n", machine_irq, rc);
+ " (err: %d)\n", machine_irq, errno);
}
}
s->machine_irq = 0;
@@ -814,9 +814,9 @@ static void xen_pt_unregister_device(PCIDevice *d)
0 /* isa_irq */);
if (rc < 0) {
XEN_PT_ERR(d, "unbinding of interrupt INT%c failed."
- " (machine irq: %i, rc: %d)"
+ " (machine irq: %i, err: %d)"
" But bravely continuing on..\n",
- 'a' + intx, machine_irq, rc);
+ 'a' + intx, machine_irq, errno);
}
}
@@ -834,9 +834,9 @@ static void xen_pt_unregister_device(PCIDevice *d)
rc = xc_physdev_unmap_pirq(xen_xc, xen_domid, machine_irq);
if (rc < 0) {
- XEN_PT_ERR(d, "unmapping of interrupt %i failed. (rc: %d)"
+ XEN_PT_ERR(d, "unmapping of interrupt %i failed. (err: %d)"
" But bravely continuing on..\n",
- machine_irq, rc);
+ machine_irq, errno);
}
}
}
diff --git a/hw/xen/xen_pt_msi.c b/hw/xen/xen_pt_msi.c
index 68db623..263e051 100644
--- a/hw/xen/xen_pt_msi.c
+++ b/hw/xen/xen_pt_msi.c
@@ -132,8 +132,8 @@ static int msi_msix_setup(XenPCIPassthroughState *s,
msix_entry, table_base);
if (rc) {
XEN_PT_ERR(&s->dev,
- "Mapping of MSI%s (rc: %i, vec: %#x, entry %#x)\n",
- is_msix ? "-X" : "", rc, gvec, msix_entry);
+ "Mapping of MSI%s (err: %i, vec: %#x, entry %#x)\n",
+ is_msix ? "-X" : "", errno, gvec, msix_entry);
return rc;
}
}
@@ -166,12 +166,12 @@ static int msi_msix_update(XenPCIPassthroughState *s,
pirq, gflags, table_addr);
if (rc) {
- XEN_PT_ERR(d, "Updating of MSI%s failed. (rc: %d)\n",
- is_msix ? "-X" : "", rc);
+ XEN_PT_ERR(d, "Updating of MSI%s failed. (err: %d)\n",
+ is_msix ? "-X" : "", errno);
if (xc_physdev_unmap_pirq(xen_xc, xen_domid, *old_pirq)) {
- XEN_PT_ERR(d, "Unmapping of MSI%s pirq %d failed.\n",
- is_msix ? "-X" : "", *old_pirq);
+ XEN_PT_ERR(d, "Unmapping of MSI%s pirq %d failed. (err: %d)\n",
+ is_msix ? "-X" : "", *old_pirq, errno);
}
*old_pirq = XEN_PT_UNASSIGNED_PIRQ;
}
@@ -199,8 +199,8 @@ static int msi_msix_disable(XenPCIPassthroughState *s,
is_msix ? "-X" : "", pirq, gvec);
rc = xc_domain_unbind_msi_irq(xen_xc, xen_domid, gvec, pirq, gflags);
if (rc) {
- XEN_PT_ERR(d, "Unbinding of MSI%s failed. (pirq: %d, gvec: %#x)\n",
- is_msix ? "-X" : "", pirq, gvec);
+ XEN_PT_ERR(d, "Unbinding of MSI%s failed. (err: %d, pirq: %d,
gvec: %#x)\n",
+ is_msix ? "-X" : "", errno, pirq, gvec);
return rc;
}
}
@@ -208,8 +208,8 @@ static int msi_msix_disable(XenPCIPassthroughState *s,
XEN_PT_LOG(d, "Unmap MSI%s pirq %d\n", is_msix ? "-X" : "", pirq);
rc = xc_physdev_unmap_pirq(xen_xc, xen_domid, pirq);
if (rc) {
- XEN_PT_ERR(d, "Unmapping of MSI%s pirq %d failed. (rc: %i)\n",
- is_msix ? "-X" : "", pirq, rc);
+ XEN_PT_ERR(d, "Unmapping of MSI%s pirq %d failed. (err: %i)\n",
+ is_msix ? "-X" : "", pirq, errno);
return rc;
}
@@ -385,8 +385,8 @@ int xen_pt_msix_update_remap(XenPCIPassthroughState *s, int
bar_index)
ret = xc_domain_unbind_pt_irq(xen_xc, xen_domid, entry->pirq,
PT_IRQ_TYPE_MSI, 0, 0, 0, 0);
if (ret) {
- XEN_PT_ERR(&s->dev, "unbind MSI-X entry %d failed\n",
- entry->pirq);
+ XEN_PT_ERR(&s->dev, "unbind MSI-X entry %d failed (err: %d)\n",
+ entry->pirq, errno);
}
entry->updated = true;
}
--
1.7.10.4
- [Qemu-devel] [PULL 0/5] xen-220615, Stefano Stabellini, 2015/06/22
- [Qemu-devel] [PULL 5/5] Revert "xen-hvm: increase maxmem before calling xc_domain_populate_physmap", Stefano Stabellini, 2015/06/22
- [Qemu-devel] [PULL 4/5] xen/pass-through: constify some static data, Stefano Stabellini, 2015/06/22
- [Qemu-devel] [PULL 2/5] xen/pass-through: ROM BAR handling adjustments, Stefano Stabellini, 2015/06/22
- [Qemu-devel] [PULL 3/5] xen/pass-through: log errno values rather than function return ones,
Stefano Stabellini <=
- [Qemu-devel] [PULL 1/5] xen/pass-through: fold host PCI command register writes, Stefano Stabellini, 2015/06/22
- Re: [Qemu-devel] [PULL 0/5] xen-220615, Peter Maydell, 2015/06/23