[Qemu-devel] [PATCH v4 10/47] Return path: Open a return path on QEMUFile for sockets

[Dr. David Alan Gilbert (git)]

From: "Dr. David Alan Gilbert" <address@hidden>

Postcopy needs a method to send messages from the destination back to
the source, this is the 'return path'.

Wire it up for 'socket' QEMUFile's using a dup'd fd.

Signed-off-by: Dr. David Alan Gilbert <address@hidden>
---
 include/migration/qemu-file.h |  7 +++++
 qemu-file.c                   | 73 +++++++++++++++++++++++++++++++++++++------
 2 files changed, 70 insertions(+), 10 deletions(-)

diff --git a/include/migration/qemu-file.h b/include/migration/qemu-file.h
index 935cf42..210e9c3 100644
--- a/include/migration/qemu-file.h
+++ b/include/migration/qemu-file.h
@@ -85,6 +85,11 @@ typedef size_t (QEMURamSaveFunc)(QEMUFile *f, void *opaque,
                                int *bytes_sent);
 
 /*
+ * Return a QEMUFile for comms in the opposite direction
+ */
+typedef QEMUFile *(QEMURetPathFunc)(void *opaque);
+
+/*
  * Stop any read or write (depending on flags) on the underlying
  * transport on the QEMUFile.
  * Existing blocking reads/writes must be woken
@@ -102,6 +107,7 @@ typedef struct QEMUFileOps {
     QEMURamHookFunc *after_ram_iterate;
     QEMURamHookFunc *hook_ram_load;
     QEMURamSaveFunc *save_page;
+    QEMURetPathFunc *get_return_path;
     QEMUFileShutdownFunc *shut_down;
 } QEMUFileOps;
 
@@ -188,6 +194,7 @@ int64_t qemu_file_get_rate_limit(QEMUFile *f);
 int qemu_file_get_error(QEMUFile *f);
 void qemu_file_set_error(QEMUFile *f, int ret);
 void qemu_file_shutdown(QEMUFile *f);
+QEMUFile *qemu_file_get_return_path(QEMUFile *f);
 void qemu_fflush(QEMUFile *f);
 
 static inline void qemu_put_be64s(QEMUFile *f, const uint64_t *pv)
diff --git a/qemu-file.c b/qemu-file.c
index 14dcf34..7393415 100644
--- a/qemu-file.c
+++ b/qemu-file.c
@@ -26,6 +26,8 @@ struct QEMUFile {
     unsigned int iovcnt;
 
     int last_error;
+
+    struct QEMUFile *return_path;
 };
 
 typedef struct QEMUFileStdio {
@@ -38,6 +40,45 @@ typedef struct QEMUFileSocket {
     QEMUFile *file;
 } QEMUFileSocket;
 
+/*
+ * Give a QEMUFile* off the same socket but data in the opposite
+ * direction.
+ */
+static QEMUFile *socket_dup_return_path(void *opaque)
+{
+    QEMUFileSocket *qfs = opaque;
+    int revfd;
+    bool this_is_read;
+    QEMUFile *result;
+
+    /* We should only be called once to get a RP on a file */
+    assert(!qfs->file->return_path);
+
+    if (qemu_file_get_error(qfs->file)) {
+        /* If the forward file is in error, don't try and open a return */
+        return NULL;
+    }
+
+    /* I don't think there's a better way to tell which direction 'this' is */
+    this_is_read = qfs->file->ops->get_buffer != NULL;
+
+    revfd = dup(qfs->fd);
+    if (revfd == -1) {
+        error_report("Error duplicating fd for return path: %s",
+                      strerror(errno));
+        return NULL;
+    }
+
+    result = qemu_fopen_socket(revfd, this_is_read ? "wb" : "rb");
+    qfs->file->return_path = result;
+
+    if (!result) {
+        close(revfd);
+    }
+
+    return result;
+}
+
 static ssize_t socket_writev_buffer(void *opaque, struct iovec *iov, int 
iovcnt,
                                     int64_t pos)
 {
@@ -343,19 +384,19 @@ QEMUFile *qemu_fdopen(int fd, const char *mode)
 }
 
 static const QEMUFileOps socket_read_ops = {
-    .get_fd =     socket_get_fd,
-    .get_buffer = socket_get_buffer,
-    .close =      socket_close,
-    .shut_down       = qemufile_socket_shutdown
-
+    .get_fd          = socket_get_fd,
+    .get_buffer      = socket_get_buffer,
+    .close           = socket_close,
+    .shut_down       = qemufile_socket_shutdown,
+    .get_return_path = socket_dup_return_path
 };
 
 static const QEMUFileOps socket_write_ops = {
-    .get_fd =     socket_get_fd,
-    .writev_buffer = socket_writev_buffer,
-    .close =      socket_close,
-    .shut_down       = qemufile_socket_shutdown
-
+    .get_fd          = socket_get_fd,
+    .writev_buffer   = socket_writev_buffer,
+    .close           = socket_close,
+    .shut_down       = qemufile_socket_shutdown,
+    .get_return_path = socket_dup_return_path
 };
 
 /*
@@ -369,6 +410,18 @@ void qemu_file_shutdown(QEMUFile *f)
     f->ops->shut_down(f, true, true);
 }
 
+/*
+ * Result: QEMUFile* for a 'return path' for comms in the opposite direction
+ *         NULL if not available
+ */
+QEMUFile *qemu_file_get_return_path(QEMUFile *f)
+{
+    if (!f->ops->get_return_path) {
+        return NULL;
+    }
+    return f->ops->get_return_path(f->opaque);
+}
+
 bool qemu_file_mode_is_not_valid(const char *mode)
 {
     if (mode == NULL ||
-- 
1.9.3