[Qemu-devel] [PULL 02/21] target-arm: Make IRQ and FIQ gpio lines on the CPU object

[Peter Maydell]

Now that ARMCPU is a subclass of DeviceState, we can make the
CPU's inbound IRQ and FIQ lines be simply gpio lines, which
means we can remove the odd arm_pic shim.

We retain the arm_pic_init_cpu() function as a backwards
compatibility shim layer so we can convert the board models
to get the IRQ and FIQ lines directly from the ARMCPU
object one at a time.

Signed-off-by: Peter Maydell <address@hidden>
Message-id: address@hidden
---
 hw/arm/pic_cpu.c |   63 +++++++++---------------------------------------------
 target-arm/cpu.c |   60 +++++++++++++++++++++++++++++++++++++++++++++++++++
 target-arm/cpu.h |    3 +++
 3 files changed, 73 insertions(+), 53 deletions(-)

diff --git a/hw/arm/pic_cpu.c b/hw/arm/pic_cpu.c
index 875280a..9c36273 100644
--- a/hw/arm/pic_cpu.c
+++ b/hw/arm/pic_cpu.c
@@ -9,60 +9,17 @@
 
 #include "hw/hw.h"
 #include "hw/arm/arm.h"
-#include "sysemu/kvm.h"
-
-/* Input 0 is IRQ and input 1 is FIQ.  */
-static void arm_pic_cpu_handler(void *opaque, int irq, int level)
-{
-    ARMCPU *cpu = opaque;
-    CPUState *cs = CPU(cpu);
-
-    switch (irq) {
-    case ARM_PIC_CPU_IRQ:
-        if (level) {
-            cpu_interrupt(cs, CPU_INTERRUPT_HARD);
-        } else {
-            cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD);
-        }
-        break;
-    case ARM_PIC_CPU_FIQ:
-        if (level) {
-            cpu_interrupt(cs, CPU_INTERRUPT_FIQ);
-        } else {
-            cpu_reset_interrupt(cs, CPU_INTERRUPT_FIQ);
-        }
-        break;
-    default:
-        hw_error("arm_pic_cpu_handler: Bad interrupt line %d\n", irq);
-    }
-}
-
-static void kvm_arm_pic_cpu_handler(void *opaque, int irq, int level)
-{
-#ifdef CONFIG_KVM
-    ARMCPU *cpu = opaque;
-    CPUState *cs = CPU(cpu);
-    int kvm_irq = KVM_ARM_IRQ_TYPE_CPU << KVM_ARM_IRQ_TYPE_SHIFT;
-
-    switch (irq) {
-    case ARM_PIC_CPU_IRQ:
-        kvm_irq |= KVM_ARM_IRQ_CPU_IRQ;
-        break;
-    case ARM_PIC_CPU_FIQ:
-        kvm_irq |= KVM_ARM_IRQ_CPU_FIQ;
-        break;
-    default:
-        hw_error("kvm_arm_pic_cpu_handler: Bad interrupt line %d\n", irq);
-    }
-    kvm_irq |= cs->cpu_index << KVM_ARM_IRQ_VCPU_SHIFT;
-    kvm_set_irq(kvm_state, kvm_irq, level ? 1 : 0);
-#endif
-}
 
+/* Backwards compatibility shim; this can disappear when all
+ * board models have been updated to get IRQ and FIQ lines directly
+ * from the ARMCPU object rather than by calling this function.
+ */
 qemu_irq *arm_pic_init_cpu(ARMCPU *cpu)
 {
-    if (kvm_enabled()) {
-        return qemu_allocate_irqs(kvm_arm_pic_cpu_handler, cpu, 2);
-    }
-    return qemu_allocate_irqs(arm_pic_cpu_handler, cpu, 2);
+    DeviceState *dev = DEVICE(cpu);
+    qemu_irq *irqs = g_new(qemu_irq, 2);
+
+    irqs[0] = qdev_get_gpio_in(dev, ARM_CPU_IRQ);
+    irqs[1] = qdev_get_gpio_in(dev, ARM_CPU_FIQ);
+    return irqs;
 }
diff --git a/target-arm/cpu.c b/target-arm/cpu.c
index 5a7566b..6f56aa8 100644
--- a/target-arm/cpu.c
+++ b/target-arm/cpu.c
@@ -23,7 +23,9 @@
 #if !defined(CONFIG_USER_ONLY)
 #include "hw/loader.h"
 #endif
+#include "hw/arm/arm.h"
 #include "sysemu/sysemu.h"
+#include "sysemu/kvm.h"
 
 static void arm_cpu_set_pc(CPUState *cs, vaddr value)
 {
@@ -129,6 +131,55 @@ static void arm_cpu_reset(CPUState *s)
     tb_flush(env);
 }
 
+#ifndef CONFIG_USER_ONLY
+static void arm_cpu_set_irq(void *opaque, int irq, int level)
+{
+    ARMCPU *cpu = opaque;
+    CPUState *cs = CPU(cpu);
+
+    switch (irq) {
+    case ARM_CPU_IRQ:
+        if (level) {
+            cpu_interrupt(cs, CPU_INTERRUPT_HARD);
+        } else {
+            cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD);
+        }
+        break;
+    case ARM_CPU_FIQ:
+        if (level) {
+            cpu_interrupt(cs, CPU_INTERRUPT_FIQ);
+        } else {
+            cpu_reset_interrupt(cs, CPU_INTERRUPT_FIQ);
+        }
+        break;
+    default:
+        hw_error("arm_cpu_set_irq: Bad interrupt line %d\n", irq);
+    }
+}
+
+static void arm_cpu_kvm_set_irq(void *opaque, int irq, int level)
+{
+#ifdef CONFIG_KVM
+    ARMCPU *cpu = opaque;
+    CPUState *cs = CPU(cpu);
+    int kvm_irq = KVM_ARM_IRQ_TYPE_CPU << KVM_ARM_IRQ_TYPE_SHIFT;
+
+    switch (irq) {
+    case ARM_CPU_IRQ:
+        kvm_irq |= KVM_ARM_IRQ_CPU_IRQ;
+        break;
+    case ARM_CPU_FIQ:
+        kvm_irq |= KVM_ARM_IRQ_CPU_FIQ;
+        break;
+    default:
+        hw_error("arm_cpu_kvm_set_irq: Bad interrupt line %d\n", irq);
+    }
+    kvm_irq |= cs->cpu_index << KVM_ARM_IRQ_VCPU_SHIFT;
+    kvm_set_irq(kvm_state, kvm_irq, level ? 1 : 0);
+#endif
+}
+#endif
+
 static inline void set_feature(CPUARMState *env, int feature)
 {
     env->features |= 1ULL << feature;
@@ -145,6 +196,15 @@ static void arm_cpu_initfn(Object *obj)
     cpu->cp_regs = g_hash_table_new_full(g_int_hash, g_int_equal,
                                          g_free, g_free);
 
+#ifndef CONFIG_USER_ONLY
+    /* Our inbound IRQ and FIQ lines */
+    if (kvm_enabled()) {
+        qdev_init_gpio_in(DEVICE(cpu), arm_cpu_kvm_set_irq, 2);
+    } else {
+        qdev_init_gpio_in(DEVICE(cpu), arm_cpu_set_irq, 2);
+    }
+#endif
+
     if (tcg_enabled() && !inited) {
         inited = true;
         arm_translate_init();
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index b2dc494..dffeec7 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -58,6 +58,9 @@
 /* ARM-specific interrupt pending bits.  */
 #define CPU_INTERRUPT_FIQ   CPU_INTERRUPT_TGT_EXT_1
 
+/* Meanings of the ARMCPU object's two inbound GPIO lines */
+#define ARM_CPU_IRQ 0
+#define ARM_CPU_FIQ 1
 
 typedef void ARMWriteCPFunc(void *opaque, int cp_info,
                             int srcreg, int operand, uint32_t value);
-- 
1.7.9.5