[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH for-next 6/8] tcg-i386: Use new return-argument
From: |
Aurelien Jarno |
Subject: |
Re: [Qemu-devel] [PATCH for-next 6/8] tcg-i386: Use new return-argument ld/st helpers |
Date: |
Thu, 15 Aug 2013 17:54:46 +0200 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Mon, Aug 05, 2013 at 08:07:23AM -1000, Richard Henderson wrote:
> Discontinue the jump-around-jump-to-jump scheme, trading it for a single
> immediate move instruction. The two extra jumps always consume 7 bytes,
> whereas the immediate move is either 5 or 7 bytes depending on where the
> code_gen_buffer gets located.
>
> Signed-off-by: Richard Henderson <address@hidden>
> ---
> include/exec/exec-all.h | 13 +------
> tcg/i386/tcg-target.c | 100
> +++++++++++++++++++++---------------------------
> 2 files changed, 46 insertions(+), 67 deletions(-)
>
> diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h
> index 5920f73..b70028a 100644
> --- a/include/exec/exec-all.h
> +++ b/include/exec/exec-all.h
> @@ -326,18 +326,9 @@ extern uintptr_t tci_tb_ptr;
> (6) jump to corresponding code of the next of fast path
> */
> # if defined(__i386__) || defined(__x86_64__)
> -/* To avoid broken disassembling, long jmp is used for embedding fast path
> pc,
> - so that the destination is the next code of fast path, though this jmp is
> - never executed.
> -
> - call MMU helper
> - jmp POST_PROC (2byte) <- GETRA()
> - jmp NEXT_CODE (5byte)
> - POST_PROCESS ... <- GETRA() + 7
> - */
> # define GETRA() ((uintptr_t)__builtin_return_address(0))
> -# define GETPC_LDST() ((uintptr_t)(GETRA() + 7 + \
> - *(int32_t *)((void *)GETRA() + 3) - 1))
> +/* The return address argument for ldst is passed directly. */
> +# define GETPC_LDST() (abort(), 0)
Why an abort here, while in the arm version, you adds support for
not defining GETPC_LDST?
> # elif defined (_ARCH_PPC) && !defined (_ARCH_PPC64)
> # define GETRA() ((uintptr_t)__builtin_return_address(0))
> # define GETPC_LDST() ((uintptr_t) ((*(int32_t *)(GETRA() - 4)) - 1))
> diff --git a/tcg/i386/tcg-target.c b/tcg/i386/tcg-target.c
> index 8addfa1..c7a02a3 100644
> --- a/tcg/i386/tcg-target.c
> +++ b/tcg/i386/tcg-target.c
> @@ -190,11 +190,11 @@ static int target_parse_constraint(TCGArgConstraint
> *ct, const char **pct_str)
> /* qemu_ld/st address constraint */
> case 'L':
> ct->ct |= TCG_CT_REG;
> -#if TCG_TARGET_REG_BITS == 64
> + if (TCG_TARGET_REG_BITS == 64) {
> tcg_regset_set32(ct->u.regs, 0, 0xffff);
> -#else
> + } else {
> tcg_regset_set32(ct->u.regs, 0, 0xff);
> -#endif
> + }
> tcg_regset_reset_reg(ct->u.regs, TCG_REG_L0);
> tcg_regset_reset_reg(ct->u.regs, TCG_REG_L1);
> break;
> @@ -1015,22 +1015,24 @@ static void tcg_out_jmp(TCGContext *s,
> tcg_target_long dest)
>
> #include "exec/softmmu_defs.h"
>
> -/* helper signature: helper_ld_mmu(CPUState *env, target_ulong addr,
> - int mmu_idx) */
> -static const void *qemu_ld_helpers[4] = {
> - helper_ldb_mmu,
> - helper_ldw_mmu,
> - helper_ldl_mmu,
> - helper_ldq_mmu,
> +/* helper signature: helper_ret_ld_mmu(CPUState *env, target_ulong addr,
> + * int mmu_idx, uintptr_t ra)
> + */
> +static const void * const qemu_ld_helpers[4] = {
> + helper_ret_ldb_mmu,
> + helper_ret_ldw_mmu,
> + helper_ret_ldl_mmu,
> + helper_ret_ldq_mmu,
> };
>
> -/* helper signature: helper_st_mmu(CPUState *env, target_ulong addr,
> - uintxx_t val, int mmu_idx) */
> -static const void *qemu_st_helpers[4] = {
> - helper_stb_mmu,
> - helper_stw_mmu,
> - helper_stl_mmu,
> - helper_stq_mmu,
> +/* helper signature: helper_ret_st_mmu(CPUState *env, target_ulong addr,
> + * uintxx_t val, int mmu_idx, uintptr_t
> ra)
> + */
> +static const void * const qemu_st_helpers[4] = {
> + helper_ret_stb_mmu,
> + helper_ret_stw_mmu,
> + helper_ret_stl_mmu,
> + helper_ret_stq_mmu,
> };
>
> static void add_qemu_ldst_label(TCGContext *s,
> @@ -1458,6 +1460,12 @@ static void add_qemu_ldst_label(TCGContext *s,
> }
> }
>
> +/* See the GETPC definition in include/exec/exec-all.h. */
> +static inline uintptr_t do_getpc(uint8_t *raddr)
> +{
> + return (uintptr_t)raddr - 1;
> +}
> +
> /*
> * Generate code for the slow path for a load at the end of block
> */
> @@ -1490,33 +1498,21 @@ static void tcg_out_qemu_ld_slow_path(TCGContext *s,
> TCGLabelQemuLdst *l)
>
> tcg_out_movi(s, TCG_TYPE_I32, TCG_REG_EAX, l->mem_index);
> tcg_out_st(s, TCG_TYPE_I32, TCG_REG_EAX, TCG_REG_ESP, ofs);
> + ofs += 4;
> +
> + tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_EAX, do_getpc(l->raddr));
> + tcg_out_st(s, TCG_TYPE_I32, TCG_REG_EAX, TCG_REG_ESP, ofs);
Same as the other patch, this can be done in one instruction.
> } else {
> - tcg_out_mov(s, TCG_TYPE_I64, tcg_target_call_iarg_regs[0],
> TCG_AREG0);
> + tcg_out_mov(s, TCG_TYPE_PTR, tcg_target_call_iarg_regs[0],
> TCG_AREG0);
> /* The second argument is already loaded with addrlo. */
> tcg_out_movi(s, TCG_TYPE_I32, tcg_target_call_iarg_regs[2],
> l->mem_index);
> + tcg_out_movi(s, TCG_TYPE_PTR, tcg_target_call_iarg_regs[3],
> + do_getpc(l->raddr));
> }
>
> - /* Code generation of qemu_ld/st's slow path calling MMU helper
> -
> - PRE_PROC ...
> - call MMU helper
> - jmp POST_PROC (2b) : short forward jump <- GETRA()
> - jmp next_code (5b) : dummy long backward jump which is never executed
> - POST_PROC ... : do post-processing <- GETRA() + 7
> - jmp next_code : jump to the code corresponding to next IR of
> qemu_ld/st
> - */
> -
> tcg_out_calli(s, (tcg_target_long)qemu_ld_helpers[s_bits]);
>
> - /* Jump to post-processing code */
> - tcg_out8(s, OPC_JMP_short);
> - tcg_out8(s, 5);
> - /* Dummy backward jump having information of fast path'pc for MMU
> helpers */
> - tcg_out8(s, OPC_JMP_long);
> - *(int32_t *)s->code_ptr = (int32_t)(l->raddr - s->code_ptr - 4);
> - s->code_ptr += 4;
> -
> data_reg = l->datalo_reg;
> switch(opc) {
> case 0 | 4:
> @@ -1598,36 +1594,28 @@ static void tcg_out_qemu_st_slow_path(TCGContext *s,
> TCGLabelQemuLdst *l)
>
> tcg_out_movi(s, TCG_TYPE_I32, TCG_REG_EAX, l->mem_index);
> tcg_out_st(s, TCG_TYPE_I32, TCG_REG_EAX, TCG_REG_ESP, ofs);
> + ofs += 4;
> +
> + tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_EAX, do_getpc(l->raddr));
> + tcg_out_st(s, TCG_TYPE_I32, TCG_REG_EAX, TCG_REG_ESP, ofs);
> } else {
> - tcg_out_mov(s, TCG_TYPE_I64, tcg_target_call_iarg_regs[0],
> TCG_AREG0);
> + tcg_out_mov(s, TCG_TYPE_PTR, tcg_target_call_iarg_regs[0],
> TCG_AREG0);
> /* The second argument is already loaded with addrlo. */
> tcg_out_mov(s, (opc == 3 ? TCG_TYPE_I64 : TCG_TYPE_I32),
> tcg_target_call_iarg_regs[2], l->datalo_reg);
> tcg_out_movi(s, TCG_TYPE_I32, tcg_target_call_iarg_regs[3],
> l->mem_index);
> + if (ARRAY_SIZE(tcg_target_call_iarg_regs) > 4) {
> + tcg_out_movi(s, TCG_TYPE_PTR, tcg_target_call_iarg_regs[4],
> + do_getpc(l->raddr));
> + } else {
> + tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_RAX, do_getpc(l->raddr));
> + tcg_out_st(s, TCG_TYPE_PTR, TCG_REG_RAX, TCG_REG_ESP, 0);
> + }
> }
>
> - /* Code generation of qemu_ld/st's slow path calling MMU helper
> -
> - PRE_PROC ...
> - call MMU helper
> - jmp POST_PROC (2b) : short forward jump <- GETRA()
> - jmp next_code (5b) : dummy long backward jump which is never executed
> - POST_PROC ... : do post-processing <- GETRA() + 7
> - jmp next_code : jump to the code corresponding to next IR of
> qemu_ld/st
> - */
> -
> tcg_out_calli(s, (tcg_target_long)qemu_st_helpers[s_bits]);
>
> - /* Jump to post-processing code */
> - tcg_out8(s, OPC_JMP_short);
> - tcg_out8(s, 5);
> - /* Dummy backward jump having information of fast path'pc for MMU
> helpers */
> - tcg_out8(s, OPC_JMP_long);
> - *(int32_t *)s->code_ptr = (int32_t)(l->raddr - s->code_ptr - 4);
> - s->code_ptr += 4;
> -
> - /* Jump to the code corresponding to next IR of qemu_st */
> tcg_out_jmp(s, (tcg_target_long)l->raddr);
> }
>
Beside the small nitpicking above, it looks fine to me.
--
Aurelien Jarno GPG: 1024D/F1BCDB73
address@hidden http://www.aurel32.net
[Qemu-devel] [PATCH for-next 7/8] tcg-arm: Use ldrd/strd for appropriate qemu_ld/st64, Richard Henderson, 2013/08/05
[Qemu-devel] [PATCH for-next 8/8] tcg-arm: Rearrange slow-path qemu_ld/st, Richard Henderson, 2013/08/05