Re: [Qemu-devel] vm performance degradation after kvm live migration or save-restore with EPT enabled

[Zhanghaoyu (A)]

>>> The QEMU command line (/var/log/libvirt/qemu/[domain name].log), 
>>> LC_ALL=C PATH=/bin:/sbin:/usr/bin:/usr/sbin HOME=/ 
>>> QEMU_AUDIO_DRV=none
>>> /usr/local/bin/qemu-system-x86_64 -name ATS1 -S -M pc-0.12 -cpu 
>>> qemu32 -enable-kvm -m 12288 -smp 4,sockets=4,cores=1,threads=1 -uuid
>>> 0505ec91-382d-800e-2c79-e5b286eb60b5 -no-user-config -nodefaults 
>>> -chardev 
>>> socket,id=charmonitor,path=/var/lib/libvirt/qemu/ATS1.monitor,server,
>>> n owait -mon chardev=charmonitor,id=monitor,mode=control -rtc 
>>> base=localtime -no-shutdown -device
>>> piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -drive 
>>> file=/opt/ne/vm/ATS1.img,if=none,id=drive-virtio-disk0,format=raw,cac
>>> h
>>> e=none -device
>>> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x8,drive=drive-virtio-disk0,i
>>> d
>>> =virtio-disk0,bootindex=1 -netdev
>>> tap,fd=20,id=hostnet0,vhost=on,vhostfd=21 -device 
>>> virtio-net-pci,netdev=hostnet0,id=net0,mac=00:e0:fc:00:0f:00,bus=pci.
>>> 0
>>> ,addr=0x3,bootindex=2 -netdev
>>> tap,fd=22,id=hostnet1,vhost=on,vhostfd=23 -device 
>>> virtio-net-pci,netdev=hostnet1,id=net1,mac=00:e0:fc:01:0f:00,bus=pci.
>>> 0
>>> ,addr=0x4 -netdev tap,fd=24,id=hostnet2,vhost=on,vhostfd=25 -device 
>>> virtio-net-pci,netdev=hostnet2,id=net2,mac=00:e0:fc:02:0f:00,bus=pci.
>>> 0
>>> ,addr=0x5 -netdev tap,fd=26,id=hostnet3,vhost=on,vhostfd=27 -device 
>>> virtio-net-pci,netdev=hostnet3,id=net3,mac=00:e0:fc:03:0f:00,bus=pci.
>>> 0
>>> ,addr=0x6 -netdev tap,fd=28,id=hostnet4,vhost=on,vhostfd=29 -device 
>>> virtio-net-pci,netdev=hostnet4,id=net4,mac=00:e0:fc:0a:0f:00,bus=pci.
>>> 0
>>> ,addr=0x7 -netdev tap,fd=30,id=hostnet5,vhost=on,vhostfd=31 -device 
>>> virtio-net-pci,netdev=hostnet5,id=net5,mac=00:e0:fc:0b:0f:00,bus=pci.
>>> 0
>>> ,addr=0x9 -chardev pty,id=charserial0 -device 
>>> isa-serial,chardev=charserial0,id=serial0 -vnc *:0 -k en-us -vga 
>>> cirrus -device i6300esb,id=watchdog0,bus=pci.0,addr=0xb
>>> -watchdog-action poweroff -device
>>> virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0xa
>>> 
>>Which QEMU version is this? Can you try with e1000 NICs instead of virtio?
>>
>This QEMU version is 1.0.0, but I also test QEMU 1.5.2, the same problem 
>exists, including the performance degradation and readonly GFNs' flooding.
>I tried with e1000 NICs instead of virtio, including the performance 
>degradation and readonly GFNs' flooding, the QEMU version is 1.5.2.
>No matter e1000 NICs or virtio NICs, the GFNs' flooding is initiated at 
>post-restore stage (i.e. running stage), as soon as the restoring completed, 
>the flooding is starting.
>
>Thanks,
>Zhang Haoyu
>
>>--
>>                      Gleb.

Should we focus on the first bad 
commit(612819c3c6e67bac8fceaa7cc402f13b1b63f7e4) and the surprising GFNs' 
flooding?

I applied below patch to  __direct_map(), 
@@ -2223,6 +2223,8 @@ static int __direct_map(struct kvm_vcpu
        int pt_write = 0;
        gfn_t pseudo_gfn;

+        map_writable = true;
+
        for_each_shadow_entry(vcpu, (u64)gfn << PAGE_SHIFT, iterator) {
                if (iterator.level == level) {
                        unsigned pte_access = ACC_ALL;
and rebuild the kvm-kmod, then re-insmod it.
After I started a VM, the host seemed to be abnormal, so many programs cannot 
be started successfully, segmentation fault is reported.
In my opinion, after above patch applied, the commit: 
612819c3c6e67bac8fceaa7cc402f13b1b63f7e4 should be of no effect, but the test 
result proved me wrong.
Dose the map_writable value's getting process in hva_to_pfn() have effect on 
the result?

Thanks,
Zhang Haoyu