[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 04/14] qemu-iotests: filter QEMU version in monitor b
|
From: |
Kevin Wolf |
|
Subject: |
[Qemu-devel] [PULL 04/14] qemu-iotests: filter QEMU version in monitor banner |
|
Date: |
Tue, 6 Aug 2013 16:39:40 +0200 |
From: Stefan Hajnoczi <address@hidden>
Filter out the QEMU monitor version banner so that tests do not break
when the QEMU version number is changed.
Signed-off-by: Stefan Hajnoczi <address@hidden>
Signed-off-by: Kevin Wolf <address@hidden>
---
tests/qemu-iotests/051.out | 64 ++++++++++++++++++++--------------------
tests/qemu-iotests/common.filter | 3 +-
2 files changed, 34 insertions(+), 33 deletions(-)
diff --git a/tests/qemu-iotests/051.out b/tests/qemu-iotests/051.out
index 9588d0c..5582ed3 100644
--- a/tests/qemu-iotests/051.out
+++ b/tests/qemu-iotests/051.out
@@ -23,11 +23,11 @@ QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo: could not
=== Enable and disable lazy refcounting on the command line, plus some invalid
values ===
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=
@@ -51,72 +51,72 @@ QEMU_PROG: -drive
file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: Lazy ref
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: could
not open disk image TEST_DIR/t.qcow2: Invalid argument
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
=== No medium ===
Testing: -drive if=floppy
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive if=ide,media=cdrom
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive if=scsi,media=cdrom
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive if=ide
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: Device needs media, but drive is empty
QEMU_PROG: Device initialization failed.
QEMU_PROG: Initialization of device ide-hd failed
Testing: -drive if=virtio
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
QEMU_PROG: -drive if=virtio: Device initialization failed.
QEMU_PROG: -drive if=virtio: Device initialization failed.
QEMU_PROG: -drive if=virtio: Device 'virtio-blk-pci' could not be initialized
Testing: -drive if=scsi
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -drive if=scsi: Device needs media, but drive is empty
QEMU_PROG: -drive if=scsi: Device initialization failed.
QEMU_PROG: Device initialization failed.
QEMU_PROG: Initialization of device lsi53c895a failed
Testing: -drive if=none,id=disk -device ide-cd,drive=disk
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-cd,drive=disk
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive if=none,id=disk -device ide-drive,drive=disk
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-drive,drive=disk: Device needs media, but drive
is empty
QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be
initialized
Testing: -drive if=none,id=disk -device ide-hd,drive=disk
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-hd,drive=disk: Device needs media, but drive is
empty
QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized
Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-disk,drive=disk
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device scsi-disk,drive=disk: Device needs media, but drive
is empty
QEMU_PROG: -device scsi-disk,drive=disk: Device initialization failed.
QEMU_PROG: -device scsi-disk,drive=disk: Device 'scsi-disk' could not be
initialized
Testing: -drive if=none,id=disk -device lsi53c895a -device scsi-hd,drive=disk
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device scsi-hd,drive=disk: Device needs media, but drive is
empty
QEMU_PROG: -device scsi-hd,drive=disk: Device initialization failed.
QEMU_PROG: -device scsi-hd,drive=disk: Device 'scsi-hd' could not be
initialized
@@ -125,77 +125,77 @@ QEMU_PROG: -device scsi-hd,drive=disk: Device 'scsi-hd'
could not be initialized
=== Read-only ===
Testing: -drive file=TEST_DIR/t.qcow2,if=floppy,readonly=on
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive file=TEST_DIR/t.qcow2,if=ide,media=cdrom,readonly=on
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,media=cdrom,readonly=on
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on: read-only not
supported by this bus type
Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive file=TEST_DIR/t.qcow2,if=scsi,readonly=on
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device
ide-cd,drive=disk
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device
lsi53c895a -device scsi-cd,drive=disk
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device
ide-drive,drive=disk
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-drive,drive=disk: Can't use a read-only drive
QEMU_PROG: -device ide-drive,drive=disk: Device initialization failed.
QEMU_PROG: -device ide-drive,drive=disk: Device 'ide-drive' could not be
initialized
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device
ide-hd,drive=disk
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) QEMU_PROG: -device ide-hd,drive=disk: Can't use a read-only drive
QEMU_PROG: -device ide-hd,drive=disk: Device initialization failed.
QEMU_PROG: -device ide-hd,drive=disk: Device 'ide-hd' could not be initialized
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device
lsi53c895a -device scsi-disk,drive=disk
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=disk,readonly=on -device
lsi53c895a -device scsi-hd,drive=disk
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
=== Cache modes ===
Testing: -drive media=cdrom,cache=none
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive media=cdrom,cache=directsync
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive media=cdrom,cache=writeback
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive media=cdrom,cache=writethrough
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive media=cdrom,cache=unsafe
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive media=cdrom,cache=invalid_value
@@ -205,7 +205,7 @@ QEMU_PROG: -drive media=cdrom,cache=invalid_value: invalid
cache option
=== Specifying the protocol layer ===
Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file
-QEMU 1.5.50 monitor - type 'help' for more information
+QEMU X.Y.Z monitor - type 'help' for more information
(qemu) q[K[Dqu[K[D[Dqui[K[D[D[Dquit[K
Testing: -drive file=TEST_DIR/t.qcow2,file.driver=qcow2
diff --git a/tests/qemu-iotests/common.filter b/tests/qemu-iotests/common.filter
index 9dbcae8..97a31ff 100644
--- a/tests/qemu-iotests/common.filter
+++ b/tests/qemu-iotests/common.filter
@@ -155,7 +155,8 @@ _filter_qemu_io()
# replace occurrences of QEMU_PROG with "qemu"
_filter_qemu()
{
- sed -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#"
+ sed -e "s#\\(^\\|(qemu) \\)$(basename $QEMU_PROG):#\1QEMU_PROG:#" \
+ -e 's#^QEMU [0-9]\+\.[0-9]\+\.[0-9]\+ monitor#QEMU X.Y.Z monitor#'
}
# make sure this script returns success
--
1.8.1.4
- [Qemu-devel] [PULL 00/14] Block fixes for 1.6, Kevin Wolf, 2013/08/06
- [Qemu-devel] [PULL 02/14] ignore SIGPIPE in qemu-img and qemu-io, Kevin Wolf, 2013/08/06
- [Qemu-devel] [PULL 03/14] iov: handle EOF in iov_send_recv, Kevin Wolf, 2013/08/06
- [Qemu-devel] [PULL 01/14] qemu-img: Error out for excess arguments, Kevin Wolf, 2013/08/06
- [Qemu-devel] [PULL 05/14] sheepdog: add missing .bdrv_has_zero_init, Kevin Wolf, 2013/08/06
- [Qemu-devel] [PULL 04/14] qemu-iotests: filter QEMU version in monitor banner,
Kevin Wolf <=
- [Qemu-devel] [PULL 09/14] qemu-iotests: add empty test case for vmdk, Kevin Wolf, 2013/08/06
- [Qemu-devel] [PULL 07/14] vmdk: use unsigned values for on disk header fields, Kevin Wolf, 2013/08/06
- [Qemu-devel] [PULL 08/14] qemu-iotests: add poke_file utility function, Kevin Wolf, 2013/08/06
- [Qemu-devel] [PULL 11/14] vmdk: check l2 table size when opening, Kevin Wolf, 2013/08/06
- [Qemu-devel] [PULL 12/14] vmdk: check l1 size before opening image, Kevin Wolf, 2013/08/06
- [Qemu-devel] [PULL 14/14] vmdk: rename num_gtes_per_gte to num_gtes_per_gt, Kevin Wolf, 2013/08/06
- [Qemu-devel] [PULL 13/14] vmdk: use heap allocation for whole_grain, Kevin Wolf, 2013/08/06
- [Qemu-devel] [PULL 10/14] vmdk: check granularity field in opening, Kevin Wolf, 2013/08/06