[Qemu-devel] [PATCH v8 12/14] target-mips-ase-dsp: Add MIPS DSP processors

[Jia Liu]

Add 74kf and mips64dspr2-generic-cpu model for test.

Signed-off-by: Jia Liu <address@hidden>
---
 target-mips/translate_init.c |   55 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/target-mips/translate_init.c b/target-mips/translate_init.c
index c39138f..c6ed0ea 100644
--- a/target-mips/translate_init.c
+++ b/target-mips/translate_init.c
@@ -311,6 +311,32 @@ static const mips_def_t mips_defs[] =
         .insn_flags = CPU_MIPS32R2 | ASE_MIPS16 | ASE_DSP | ASE_MT,
         .mmu_type = MMU_TYPE_R4000,
     },
+    {
+        /* A generic CPU providing MIPS32 ASE DSP Release 2 features.
+           FIXME: Eventually this should be replaced by a real CPU model. */
+        .name = "74Kf",
+        .CP0_PRid = 0x00019300,
+        .CP0_Config0 = MIPS_CONFIG0 | (0x1 << CP0C0_AR) |
+                    (MMU_TYPE_R4000 << CP0C0_MT),
+        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (15 << CP0C1_MMU) |
+                       (0 << CP0C1_IS) | (3 << CP0C1_IL) | (1 << CP0C1_IA) |
+                       (0 << CP0C1_DS) | (3 << CP0C1_DL) | (1 << CP0C1_DA) |
+                       (1 << CP0C1_CA),
+        .CP0_Config2 = MIPS_CONFIG2,
+        .CP0_Config3 = MIPS_CONFIG3 | (0 << CP0C3_VInt) | (1 << CP0C3_DSPP),
+        .CP0_LLAddr_rw_bitmask = 0,
+        .CP0_LLAddr_shift = 4,
+        .SYNCI_Step = 32,
+        .CCRes = 2,
+        /* No DSP implemented. */
+        .CP0_Status_rw_bitmask = 0x3778FF1F,
+        .CP1_fcr0 = (1 << FCR0_F64) | (1 << FCR0_L) | (1 << FCR0_W) |
+                    (1 << FCR0_D) | (1 << FCR0_S) | (0x93 << FCR0_PRID),
+        .SEGBITS = 32,
+        .PABITS = 32,
+        .insn_flags = CPU_MIPS32R2 | ASE_MIPS16 | ASE_DSP | ASE_DSPR2,
+        .mmu_type = MMU_TYPE_R4000,
+    },
 #if defined(TARGET_MIPS64)
     {
         .name = "R4000",
@@ -484,6 +510,35 @@ static const mips_def_t mips_defs[] =
       .insn_flags = CPU_LOONGSON2F,
       .mmu_type = MMU_TYPE_R4000,
     },
+    {
+        /* A generic CPU providing MIPS64 ASE DSP Release 2 features.
+           FIXME: Eventually this should be replaced by a real CPU model. */
+        .name = "mips64dspr2",
+        /* We emulate a later version of the 20Kc, earlier ones had a broken
+           WAIT instruction. */
+        .CP0_PRid = 0x000182a0,
+        .CP0_Config0 = MIPS_CONFIG0 | (0x2 << CP0C0_AT) |
+                    (MMU_TYPE_R4000 << CP0C0_MT) | (1 << CP0C0_VI),
+        .CP0_Config1 = MIPS_CONFIG1 | (1 << CP0C1_FP) | (47 << CP0C1_MMU) |
+                       (2 << CP0C1_IS) | (4 << CP0C1_IL) | (3 << CP0C1_IA) |
+                       (2 << CP0C1_DS) | (4 << CP0C1_DL) | (3 << CP0C1_DA) |
+                       (1 << CP0C1_PC) | (1 << CP0C1_WR) | (1 << CP0C1_EP),
+        .CP0_Config2 = MIPS_CONFIG2,
+        .CP0_Config3 = MIPS_CONFIG3 | (1 << CP0C3_DSPP),
+        .CP0_LLAddr_rw_bitmask = 0,
+        .CP0_LLAddr_shift = 0,
+        .SYNCI_Step = 32,
+        .CCRes = 1,
+        .CP0_Status_rw_bitmask = 0x37FBFFFF,
+        /* The 20Kc has F64 / L / W but doesn't use the fcr0 bits. */
+        .CP1_fcr0 = (1 << FCR0_3D) | (1 << FCR0_PS) |
+                    (1 << FCR0_D) | (1 << FCR0_S) |
+                    (0x82 << FCR0_PRID) | (0x0 << FCR0_REV),
+        .SEGBITS = 40,
+        .PABITS = 36,
+        .insn_flags = CPU_MIPS64R2 | ASE_DSP | ASE_DSPR2,
+        .mmu_type = MMU_TYPE_R4000,
+    },
 
 #endif
 };
-- 
1.7.9.5