[Qemu-devel] [PATCH v7 00/10] ARM: Samsung Exynos4210-based boards support.

[Evgeny Voevodin]

This set of patches adds support for Samsung S5PC210-based boards NURI and 
SMDKC210.
Tested on Linux kernel v3.x series. Usage of "-smp 2" option is required for 
now.

Changelog:
 v6->v7
 - exynos4210_pwm.c: added usage of "ptimer.h"
 - exynos4210_mct.c: added usage of "ptimer.h"
 v5->v6
 - arm_boot.c, vexpress.c, realview.c: board should specify smp_bootreg_addr if 
its ncpu > 1
 - patch order changed, "boot secondary CPU" is included in "exynos boards" 
patch.
 - exynos4210_mct.c: usage of UINTX_MAX, removed excessive property list, fixed 
indentation,
                     fixed comments
 - exynos4210_pwm.c: spaces and brakcets in macros, removed excessive property 
list,
                     fixed indentation,
 - exynos4210_combiner.c: removed excessive reset, fixed indentation, fixed 
comments
 - exynos4210_gic.c: fixed indentation, fixed syntax
 - exynos4210_uart.c: fixed indentation, fixed syntax
 - exynos4210.c: fixed comments
 - Makefile.target: removed "\"
 - hw/exynos4210_fimd.c: rebased against current master: all manipulation with 
physical pages are dropped and
                         replaced with new memory API functions;

                         added three new members to winow's state: 
MemoryRegionSection to describe section
                         of system RAM containing current framebuffer, host 
pointer to framebuffer data and
                         framebuffer length;

                         mapping of framebuffer now performed only on 
framebuffer settings change
                         instead on every display update;

                         bytes swap in uint64 variable now performed with 
standard QEMU bswap64 function;

                         blencon register type changed to uint32_t;

                         fixed incorrect spelling of "palette" word;

                         if ... else statements in exynos4210_fimd_read() and 
exynos4210_fimd_write() are
                         replaced with switch() {} statement.
 
    

 v4->v5
 - hw/exynos4210_gic.c: Use memory aliases for CPU interface and Distributer.
   Excessive RW functions are removed.
 - hw/exynos4210_pwm.c and hw/exynos4210_mct.c: Saving of timers added.
 - hw/exynos4210_uart.c: VMSTATE version_id fixed.
 v3->v4
 - Split Exynos SOC and boards.
 - Temporary removed SD and CMU support to post later.
 - Lan9118 remarks took into account.
 - Secondary CPU bootloader remarks took into account.
 - PWM remarks took into account.
 - UART remarks took into account.
 v2->v3
 - Reverted hw/arm_gic.c modification
 - Added IRQ Gate to Exynos4210 board.

Evgeny Voevodin (8):
  hw/sysbus.h: Increase maximum number of device IRQs.
  hw/arm_boot.c: Make SMP boards specify address to poll in bootup loop
  ARM: exynos4210: IRQ subsystem support.
  ARM: Samsung exynos4210-based boards emulation
  ARM: exynos4210: PWM support.
  ARM: exynos4210: MCT support.
  hw/lan9118: Add basic 16-bit mode support.
  hw/exynos4210.c: Add LAN support for SMDKC210.

Maksim Kozlov (1):
  ARM: exynos4210: UART support

Mitsyanko Igor (1):
  Exynos4210: added display controller implementation

 Makefile.target          |    3 +
 hw/arm-misc.h            |    1 +
 hw/arm_boot.c            |   18 +-
 hw/exynos4210.c          |  272 +++++++
 hw/exynos4210.h          |  128 +++
 hw/exynos4210_combiner.c |  464 +++++++++++
 hw/exynos4210_fimd.c     | 1924 ++++++++++++++++++++++++++++++++++++++++++++++
 hw/exynos4210_gic.c      |  437 +++++++++++
 hw/exynos4210_mct.c      | 1479 +++++++++++++++++++++++++++++++++++
 hw/exynos4210_pwm.c      |  413 ++++++++++
 hw/exynos4210_uart.c     |  668 ++++++++++++++++
 hw/exynos4_boards.c      |  166 ++++
 hw/lan9118.c             |  115 +++-
 hw/realview.c            |    2 +
 hw/sysbus.h              |    2 +-
 hw/vexpress.c            |    2 +
 16 files changed, 6080 insertions(+), 14 deletions(-)
 create mode 100644 hw/exynos4210.c
 create mode 100644 hw/exynos4210.h
 create mode 100644 hw/exynos4210_combiner.c
 create mode 100644 hw/exynos4210_fimd.c
 create mode 100644 hw/exynos4210_gic.c
 create mode 100644 hw/exynos4210_mct.c
 create mode 100644 hw/exynos4210_pwm.c
 create mode 100644 hw/exynos4210_uart.c
 create mode 100644 hw/exynos4_boards.c

-- 
1.7.4.1