[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 15/22] i8259: PREP: Replace pic_intack_read with pic
From: |
Jan Kiszka |
Subject: |
[Qemu-devel] [PATCH 15/22] i8259: PREP: Replace pic_intack_read with pic_read_irq |
Date: |
Wed, 28 Sep 2011 13:01:01 +0200 |
There is nothing in the i8259 spec that justifies the special
pic_intack_read. At least the Linux PREP kernels configure the PICs
properly so that pic_read_irq returns identical values, and setting
read_reg_select in PIC0 cannot be derived from any special i8259 mode.
So switch ppc_prep to pic_read_irq and drop the now unused PIC code.
CC: Alexander Graf <address@hidden>
Signed-off-by: Jan Kiszka <address@hidden>
---
hw/i8259.c | 39 ---------------------------------------
hw/pc.h | 1 -
hw/ppc_prep.c | 2 +-
3 files changed, 1 insertions(+), 41 deletions(-)
diff --git a/hw/i8259.c b/hw/i8259.c
index 9e32ceb..bbb12cf 100644
--- a/hw/i8259.c
+++ b/hw/i8259.c
@@ -356,30 +356,6 @@ static void pic_ioport_write(void *opaque,
target_phys_addr_t addr64,
}
}
-static uint32_t pic_poll_read(PicState *s)
-{
- int ret;
-
- ret = pic_get_irq(s);
- if (ret >= 0) {
- bool slave = (s == &isa_pic->pics[1]);
-
- if (slave) {
- s->pics_state->pics[0].isr &= ~(1 << 2);
- s->pics_state->pics[0].irr &= ~(1 << 2);
- }
- s->irr &= ~(1 << ret);
- s->isr &= ~(1 << ret);
- if (slave || ret != 2) {
- pic_update_irq(s);
- }
- } else {
- ret = 0x07;
- }
-
- return ret;
-}
-
static uint64_t pic_ioport_read(void *opaque, target_phys_addr_t addr,
unsigned size)
{
@@ -409,21 +385,6 @@ static uint64_t pic_ioport_read(void *opaque,
target_phys_addr_t addr,
return ret;
}
-/* memory mapped interrupt status */
-/* XXX: may be the same than pic_read_irq() */
-uint32_t pic_intack_read(PicState2 *s)
-{
- int ret;
-
- ret = pic_poll_read(&s->pics[0]);
- if (ret == 2)
- ret = pic_poll_read(&s->pics[1]) + 8;
- /* Prepare for ISR read */
- s->pics[0].read_reg_select = 1;
-
- return ret;
-}
-
int pic_get_output(PicState2 *s)
{
return (pic_get_irq(&s->pics[0]) >= 0);
diff --git a/hw/pc.h b/hw/pc.h
index fd5f9b2..14c61a2 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -65,7 +65,6 @@ extern PicState2 *isa_pic;
qemu_irq *i8259_init(qemu_irq parent_irq);
int pic_read_irq(PicState2 *s);
int pic_get_output(PicState2 *s);
-uint32_t pic_intack_read(PicState2 *s);
void pic_info(Monitor *mon);
void irq_info(Monitor *mon);
diff --git a/hw/ppc_prep.c b/hw/ppc_prep.c
index d26049b..6427baa 100644
--- a/hw/ppc_prep.c
+++ b/hw/ppc_prep.c
@@ -130,7 +130,7 @@ static inline uint32_t _PPC_intack_read(target_phys_addr_t
addr)
uint32_t retval = 0;
if ((addr & 0xf) == 0)
- retval = pic_intack_read(isa_pic);
+ retval = pic_read_irq(isa_pic);
#if 0
printf("%s: 0x" TARGET_FMT_plx " <= %08" PRIx32 "\n", __func__, addr,
retval);
--
1.7.3.4
- Re: [Qemu-devel] [PATCH 11/22] i8259: Update IRQ state after reset, (continued)
- Re: [Qemu-devel] [PATCH 11/22] i8259: Update IRQ state after reset, Jan Kiszka, 2011/09/28
- Re: [Qemu-devel] [PATCH 11/22] i8259: Update IRQ state after reset, Blue Swirl, 2011/09/29
- Re: [Qemu-devel] [PATCH 11/22] i8259: Update IRQ state after reset, Jan Kiszka, 2011/09/30
- Re: [Qemu-devel] [PATCH 11/22] i8259: Update IRQ state after reset, Peter Maydell, 2011/09/30
- Re: [Qemu-devel] [PATCH 11/22] i8259: Update IRQ state after reset, Blue Swirl, 2011/09/30
- Re: [Qemu-devel] [PATCH 11/22] i8259: Update IRQ state after reset, Blue Swirl, 2011/09/30
[Qemu-devel] [PATCH 15/22] i8259: PREP: Replace pic_intack_read with pic_read_irq,
Jan Kiszka <=
[Qemu-devel] [PATCH 09/22] i8259: Do not update IRQ output after spurious pic_poll_read, Jan Kiszka, 2011/09/28
[Qemu-devel] [PATCH 02/22] pc: Generalize ISA IRQs to GSIs, Jan Kiszka, 2011/09/28
[Qemu-devel] [PATCH 13/22] i8259: Fix poll command, Jan Kiszka, 2011/09/28
[Qemu-devel] [PATCH 12/22] i8259: Switch to per-PIC IRQ update, Jan Kiszka, 2011/09/28
Re: [Qemu-devel] [PATCH 00/22] Rework i8259 and PC interrupt models, Richard Henderson, 2011/09/28