[Qemu-devel] [PATCH 09/35] block: Revert entanglement of bdrv_is_inserted() with tray status

[Kevin Wolf]

From: Markus Armbruster <address@hidden>

Commit 4be9762a changed bdrv_is_inserted() to fail when the tray is
open.  Unfortunately, there are two different kinds of users, with
conflicting needs.

1. Device models using bdrv_eject(), currently ide-cd and scsi-cd.
They expect bdrv_is_inserted() to reflect the tray status.  Commit
4be9762a makes them happy.

2. Code that wants to know whether a BlockDriverState has media, such
as find_image_format(), bdrv_flush_all().  Commit 4be9762a makes them
unhappy.  In particular, it breaks flush on VM stop for media ejected
by the guest.

Revert the change to bdrv_is_inserted().  Check the tray status in the
device models instead.

Note on IDE: Since only ATAPI devices have a tray, and they don't
accept ATA commands since the recent commit "ide: Reject ATA commands
specific to drive kinds", checking in atapi.c suffices.

Signed-off-by: Markus Armbruster <address@hidden>
Signed-off-by: Kevin Wolf <address@hidden>
---
 block.c        |    7 +++----
 hw/ide/atapi.c |   15 ++++++++-------
 hw/scsi-disk.c |   10 ++++++++--
 3 files changed, 19 insertions(+), 13 deletions(-)

diff --git a/block.c b/block.c
index a8c789a..6fe8add 100644
--- a/block.c
+++ b/block.c
@@ -3026,13 +3026,12 @@ static int coroutine_fn 
bdrv_co_flush_em(BlockDriverState *bs)
 int bdrv_is_inserted(BlockDriverState *bs)
 {
     BlockDriver *drv = bs->drv;
-    int ret;
+
     if (!drv)
         return 0;
     if (!drv->bdrv_is_inserted)
-        return !bs->tray_open;
-    ret = drv->bdrv_is_inserted(bs);
-    return ret;
+        return 1;
+    return drv->bdrv_is_inserted(bs);
 }
 
 /**
diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
index 713b1fd..0943f66 100644
--- a/hw/ide/atapi.c
+++ b/hw/ide/atapi.c
@@ -73,7 +73,7 @@ static void lba_to_msf(uint8_t *buf, int lba)
 
 static inline int media_present(IDEState *s)
 {
-    return (s->nb_sectors > 0);
+    return !s->tray_open && s->nb_sectors > 0;
 }
 
 /* XXX: DVDs that could fit on a CD will be reported as a CD */
@@ -1077,20 +1077,21 @@ static const struct {
     [ 0x03 ] = { cmd_request_sense,                 ALLOW_UA },
     [ 0x12 ] = { cmd_inquiry,                       ALLOW_UA },
     [ 0x1a ] = { cmd_mode_sense, /* (6) */          0 },
-    [ 0x1b ] = { cmd_start_stop_unit,               0 },
+    [ 0x1b ] = { cmd_start_stop_unit,               0 }, /* [1] */
     [ 0x1e ] = { cmd_prevent_allow_medium_removal,  0 },
     [ 0x25 ] = { cmd_read_cdvd_capacity,            CHECK_READY },
-    [ 0x28 ] = { cmd_read, /* (10) */               0 },
+    [ 0x28 ] = { cmd_read, /* (10) */               CHECK_READY },
     [ 0x2b ] = { cmd_seek,                          CHECK_READY },
     [ 0x43 ] = { cmd_read_toc_pma_atip,             CHECK_READY },
     [ 0x46 ] = { cmd_get_configuration,             ALLOW_UA },
     [ 0x4a ] = { cmd_get_event_status_notification, ALLOW_UA },
     [ 0x5a ] = { cmd_mode_sense, /* (10) */         0 },
-    [ 0xa8 ] = { cmd_read, /* (12) */               0 },
-    [ 0xad ] = { cmd_read_dvd_structure,            0 },
+    [ 0xa8 ] = { cmd_read, /* (12) */               CHECK_READY },
+    [ 0xad ] = { cmd_read_dvd_structure,            CHECK_READY },
     [ 0xbb ] = { cmd_set_speed,                     0 },
     [ 0xbd ] = { cmd_mechanism_status,              0 },
-    [ 0xbe ] = { cmd_read_cd,                       0 },
+    [ 0xbe ] = { cmd_read_cd,                       CHECK_READY },
+    /* [1] handler detects and reports not ready condition itself */
 };
 
 void ide_atapi_cmd(IDEState *s)
@@ -1126,7 +1127,7 @@ void ide_atapi_cmd(IDEState *s)
      * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close
      * states rely on this behavior.
      */
-    if (bdrv_is_inserted(s->bs) && s->cdrom_changed) {
+    if (!s->tray_open && bdrv_is_inserted(s->bs) && s->cdrom_changed) {
         ide_atapi_cmd_error(s, SENSE_NOT_READY, ASC_MEDIUM_NOT_PRESENT);
 
         s->cdrom_changed = 0;
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index f18ddd7..f35ada4 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -183,6 +183,9 @@ static void scsi_read_data(SCSIRequest *req)
     if (n > SCSI_DMA_BUF_SIZE / 512)
         n = SCSI_DMA_BUF_SIZE / 512;
 
+    if (s->tray_open) {
+        scsi_read_complete(r, -ENOMEDIUM);
+    }
     r->iov.iov_len = n * 512;
     qemu_iovec_init_external(&r->qiov, &r->iov, 1);
 
@@ -281,6 +284,9 @@ static void scsi_write_data(SCSIRequest *req)
 
     n = r->iov.iov_len / 512;
     if (n) {
+        if (s->tray_open) {
+            scsi_write_complete(r, -ENOMEDIUM);
+        }
         qemu_iovec_init_external(&r->qiov, &r->iov, 1);
 
         bdrv_acct_start(s->bs, &r->acct, n * BDRV_SECTOR_SIZE, 
BDRV_ACCT_WRITE);
@@ -837,7 +843,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, 
uint8_t *outbuf)
 
     switch (req->cmd.buf[0]) {
     case TEST_UNIT_READY:
-        if (!bdrv_is_inserted(s->bs))
+        if (s->tray_open || !bdrv_is_inserted(s->bs))
             goto not_ready;
         break;
     case INQUIRY:
@@ -957,7 +963,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, 
uint8_t *outbuf)
     return buflen;
 
 not_ready:
-    if (!bdrv_is_inserted(s->bs)) {
+    if (s->tray_open || !bdrv_is_inserted(s->bs)) {
         scsi_check_condition(r, SENSE_CODE(NO_MEDIUM));
     } else {
         scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY));
-- 
1.7.6