[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 3/9] eepro100: Use PCI DMA stub functions
From: |
David Gibson |
Subject: |
[Qemu-devel] [PATCH 3/9] eepro100: Use PCI DMA stub functions |
Date: |
Mon, 5 Sep 2011 14:34:58 +1000 |
From: Eduard - Gabriel Munteanu <address@hidden>
This updates the eepro100 device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <address@hidden>
Signed-off-by: David Gibson <address@hidden>
---
hw/eepro100.c | 113 +++++++++++++++++++++------------------------------------
1 files changed, 41 insertions(+), 72 deletions(-)
diff --git a/hw/eepro100.c b/hw/eepro100.c
index 4e3c52f..9f57371 100644
--- a/hw/eepro100.c
+++ b/hw/eepro100.c
@@ -46,6 +46,7 @@
#include "net.h"
#include "eeprom93xx.h"
#include "sysemu.h"
+#include "dma.h"
/* QEMU sends frames smaller than 60 bytes to ethernet nics.
* Such frames are rejected by real nics and their emulations.
@@ -315,38 +316,6 @@ static const uint16_t eepro100_mdi_mask[] = {
0xffff, 0xffff, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
};
-/* Read a 16 bit little endian value from physical memory. */
-static uint16_t e100_ldw_le_phys(target_phys_addr_t addr)
-{
- /* Load 16 bit (little endian) word from emulated hardware. */
- uint16_t val;
- cpu_physical_memory_read(addr, &val, sizeof(val));
- return le16_to_cpu(val);
-}
-
-/* Read a 32 bit little endian value from physical memory. */
-static uint32_t e100_ldl_le_phys(target_phys_addr_t addr)
-{
- /* Load 32 bit (little endian) word from emulated hardware. */
- uint32_t val;
- cpu_physical_memory_read(addr, &val, sizeof(val));
- return le32_to_cpu(val);
-}
-
-/* Write a 16 bit little endian value to physical memory. */
-static void e100_stw_le_phys(target_phys_addr_t addr, uint16_t val)
-{
- val = cpu_to_le16(val);
- cpu_physical_memory_write(addr, &val, sizeof(val));
-}
-
-/* Write a 32 bit little endian value to physical memory. */
-static void e100_stl_le_phys(target_phys_addr_t addr, uint32_t val)
-{
- val = cpu_to_le32(val);
- cpu_physical_memory_write(addr, &val, sizeof(val));
-}
-
#define POLYNOMIAL 0x04c11db6
/* From FreeBSD */
@@ -744,21 +713,22 @@ static void dump_statistics(EEPRO100State * s)
* values which really matter.
* Number of data should check configuration!!!
*/
- cpu_physical_memory_write(s->statsaddr, &s->statistics, s->stats_size);
- e100_stl_le_phys(s->statsaddr + 0, s->statistics.tx_good_frames);
- e100_stl_le_phys(s->statsaddr + 36, s->statistics.rx_good_frames);
- e100_stl_le_phys(s->statsaddr + 48, s->statistics.rx_resource_errors);
- e100_stl_le_phys(s->statsaddr + 60, s->statistics.rx_short_frame_errors);
+ pci_dma_write(&s->dev, s->statsaddr,
+ (uint8_t *) & s->statistics, s->stats_size);
+ stl_pci_dma(&s->dev, s->statsaddr + 0, s->statistics.tx_good_frames);
+ stl_pci_dma(&s->dev, s->statsaddr + 36, s->statistics.rx_good_frames);
+ stl_pci_dma(&s->dev, s->statsaddr + 48, s->statistics.rx_resource_errors);
+ stl_pci_dma(&s->dev, s->statsaddr + 60,
s->statistics.rx_short_frame_errors);
#if 0
- e100_stw_le_phys(s->statsaddr + 76, s->statistics.xmt_tco_frames);
- e100_stw_le_phys(s->statsaddr + 78, s->statistics.rcv_tco_frames);
+ stw_pci_dma(&s->dev, s->statsaddr + 76, s->statistics.xmt_tco_frames);
+ stw_pci_dma(&s->dev, s->statsaddr + 78, s->statistics.rcv_tco_frames);
missing("CU dump statistical counters");
#endif
}
static void read_cb(EEPRO100State *s)
{
- cpu_physical_memory_read(s->cb_address, &s->tx, sizeof(s->tx));
+ pci_dma_read(&s->dev, s->cb_address, (uint8_t *) &s->tx, sizeof(s->tx));
s->tx.status = le16_to_cpu(s->tx.status);
s->tx.command = le16_to_cpu(s->tx.command);
s->tx.link = le32_to_cpu(s->tx.link);
@@ -788,18 +758,17 @@ static void tx_command(EEPRO100State *s)
}
assert(tcb_bytes <= sizeof(buf));
while (size < tcb_bytes) {
- uint32_t tx_buffer_address = e100_ldl_le_phys(tbd_address);
- uint16_t tx_buffer_size = e100_ldw_le_phys(tbd_address + 4);
+ uint32_t tx_buffer_address = ldl_pci_dma(&s->dev, tbd_address);
+ uint16_t tx_buffer_size = lduw_pci_dma(&s->dev, tbd_address + 4);
#if 0
- uint16_t tx_buffer_el = e100_ldw_le_phys(tbd_address + 6);
+ uint16_t tx_buffer_el = lduw_pci_dma(&s->dev, tbd_address + 6);
#endif
tbd_address += 8;
TRACE(RXTX, logout
("TBD (simplified mode): buffer address 0x%08x, size 0x%04x\n",
tx_buffer_address, tx_buffer_size));
tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
- cpu_physical_memory_read(tx_buffer_address, &buf[size],
- tx_buffer_size);
+ pci_dma_read(&s->dev, tx_buffer_address, &buf[size], tx_buffer_size);
size += tx_buffer_size;
}
if (tbd_array == 0xffffffff) {
@@ -810,16 +779,16 @@ static void tx_command(EEPRO100State *s)
if (s->has_extended_tcb_support && !(s->configuration[6] & BIT(4))) {
/* Extended Flexible TCB. */
for (; tbd_count < 2; tbd_count++) {
- uint32_t tx_buffer_address = e100_ldl_le_phys(tbd_address);
- uint16_t tx_buffer_size = e100_ldw_le_phys(tbd_address + 4);
- uint16_t tx_buffer_el = e100_ldw_le_phys(tbd_address + 6);
+ uint32_t tx_buffer_address = ldl_pci_dma(&s->dev, tbd_address);
+ uint16_t tx_buffer_size = lduw_pci_dma(&s->dev, tbd_address +
4);
+ uint16_t tx_buffer_el = lduw_pci_dma(&s->dev, tbd_address + 6);
tbd_address += 8;
TRACE(RXTX, logout
("TBD (extended flexible mode): buffer address 0x%08x,
size 0x%04x\n",
tx_buffer_address, tx_buffer_size));
tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
- cpu_physical_memory_read(tx_buffer_address, &buf[size],
- tx_buffer_size);
+ pci_dma_read(&s->dev, tx_buffer_address,
+ &buf[size], tx_buffer_size);
size += tx_buffer_size;
if (tx_buffer_el & 1) {
break;
@@ -828,16 +797,16 @@ static void tx_command(EEPRO100State *s)
}
tbd_address = tbd_array;
for (; tbd_count < s->tx.tbd_count; tbd_count++) {
- uint32_t tx_buffer_address = e100_ldl_le_phys(tbd_address);
- uint16_t tx_buffer_size = e100_ldw_le_phys(tbd_address + 4);
- uint16_t tx_buffer_el = e100_ldw_le_phys(tbd_address + 6);
+ uint32_t tx_buffer_address = ldl_pci_dma(&s->dev, tbd_address);
+ uint16_t tx_buffer_size = lduw_pci_dma(&s->dev, tbd_address + 4);
+ uint16_t tx_buffer_el = lduw_pci_dma(&s->dev, tbd_address + 6);
tbd_address += 8;
TRACE(RXTX, logout
("TBD (flexible mode): buffer address 0x%08x, size 0x%04x\n",
tx_buffer_address, tx_buffer_size));
tx_buffer_size = MIN(tx_buffer_size, sizeof(buf) - size);
- cpu_physical_memory_read(tx_buffer_address, &buf[size],
- tx_buffer_size);
+ pci_dma_read(&s->dev, tx_buffer_address,
+ &buf[size], tx_buffer_size);
size += tx_buffer_size;
if (tx_buffer_el & 1) {
break;
@@ -862,7 +831,7 @@ static void set_multicast_list(EEPRO100State *s)
TRACE(OTHER, logout("multicast list, multicast count = %u\n",
multicast_count));
for (i = 0; i < multicast_count; i += 6) {
uint8_t multicast_addr[6];
- cpu_physical_memory_read(s->cb_address + 10 + i, multicast_addr, 6);
+ pci_dma_read(&s->dev, s->cb_address + 10 + i, multicast_addr, 6);
TRACE(OTHER, logout("multicast entry %s\n", nic_dump(multicast_addr,
6)));
unsigned mcast_idx = compute_mcast_idx(multicast_addr);
assert(mcast_idx < 64);
@@ -896,12 +865,12 @@ static void action_command(EEPRO100State *s)
/* Do nothing. */
break;
case CmdIASetup:
- cpu_physical_memory_read(s->cb_address + 8, &s->conf.macaddr.a[0],
6);
+ pci_dma_read(&s->dev, s->cb_address + 8, &s->conf.macaddr.a[0], 6);
TRACE(OTHER, logout("macaddr: %s\n",
nic_dump(&s->conf.macaddr.a[0], 6)));
break;
case CmdConfigure:
- cpu_physical_memory_read(s->cb_address + 8, &s->configuration[0],
- sizeof(s->configuration));
+ pci_dma_read(&s->dev, s->cb_address + 8,
+ &s->configuration[0], sizeof(s->configuration));
TRACE(OTHER, logout("configuration: %s\n",
nic_dump(&s->configuration[0], 16)));
TRACE(OTHER, logout("configuration: %s\n",
@@ -938,7 +907,7 @@ static void action_command(EEPRO100State *s)
break;
}
/* Write new status. */
- e100_stw_le_phys(s->cb_address, s->tx.status | ok_status | STATUS_C);
+ stw_pci_dma(&s->dev, s->cb_address, s->tx.status | ok_status |
STATUS_C);
if (bit_i) {
/* CU completed action. */
eepro100_cx_interrupt(s);
@@ -1005,7 +974,7 @@ static void eepro100_cu_command(EEPRO100State * s, uint8_t
val)
/* Dump statistical counters. */
TRACE(OTHER, logout("val=0x%02x (dump stats)\n", val));
dump_statistics(s);
- e100_stl_le_phys(s->statsaddr + s->stats_size, 0xa005);
+ stl_pci_dma(&s->dev, s->statsaddr + s->stats_size, 0xa005);
break;
case CU_CMD_BASE:
/* Load CU base. */
@@ -1016,7 +985,7 @@ static void eepro100_cu_command(EEPRO100State * s, uint8_t
val)
/* Dump and reset statistical counters. */
TRACE(OTHER, logout("val=0x%02x (dump stats and reset)\n", val));
dump_statistics(s);
- e100_stl_le_phys(s->statsaddr + s->stats_size, 0xa007);
+ stl_pci_dma(&s->dev, s->statsaddr + s->stats_size, 0xa007);
memset(&s->statistics, 0, sizeof(s->statistics));
break;
case CU_SRESUME:
@@ -1310,10 +1279,10 @@ static void eepro100_write_port(EEPRO100State *s)
case PORT_SELFTEST:
TRACE(OTHER, logout("selftest address=0x%08x\n", address));
eepro100_selftest_t data;
- cpu_physical_memory_read(address, &data, sizeof(data));
+ pci_dma_read(&s->dev, address, (uint8_t *) & data, sizeof(data));
data.st_sign = 0xffffffff;
data.st_result = 0;
- cpu_physical_memory_write(address, &data, sizeof(data));
+ pci_dma_write(&s->dev, address, (uint8_t *) & data, sizeof(data));
break;
case PORT_SELECTIVE_RESET:
TRACE(OTHER, logout("selective reset, selftest address=0x%08x\n",
address));
@@ -1729,8 +1698,8 @@ static ssize_t nic_receive(VLANClientState *nc, const
uint8_t * buf, size_t size
}
/* !!! */
eepro100_rx_t rx;
- cpu_physical_memory_read(s->ru_base + s->ru_offset, &rx,
- sizeof(eepro100_rx_t));
+ pci_dma_read(&s->dev, s->ru_base + s->ru_offset,
+ (uint8_t *) &rx, sizeof(eepro100_rx_t));
uint16_t rfd_command = le16_to_cpu(rx.command);
uint16_t rfd_size = le16_to_cpu(rx.size);
@@ -1746,10 +1715,10 @@ static ssize_t nic_receive(VLANClientState *nc, const
uint8_t * buf, size_t size
#endif
TRACE(OTHER, logout("command 0x%04x, link 0x%08x, addr 0x%08x, size %u\n",
rfd_command, rx.link, rx.rx_buf_addr, rfd_size));
- e100_stw_le_phys(s->ru_base + s->ru_offset +
- offsetof(eepro100_rx_t, status), rfd_status);
- e100_stw_le_phys(s->ru_base + s->ru_offset +
- offsetof(eepro100_rx_t, count), size);
+ stw_pci_dma(&s->dev, s->ru_base + s->ru_offset +
+ offsetof(eepro100_rx_t, status), rfd_status);
+ stw_pci_dma(&s->dev, s->ru_base + s->ru_offset +
+ offsetof(eepro100_rx_t, count), size);
/* Early receive interrupt not supported. */
#if 0
eepro100_er_interrupt(s);
@@ -1763,8 +1732,8 @@ static ssize_t nic_receive(VLANClientState *nc, const
uint8_t * buf, size_t size
#if 0
assert(!(s->configuration[17] & BIT(0)));
#endif
- cpu_physical_memory_write(s->ru_base + s->ru_offset +
- sizeof(eepro100_rx_t), buf, size);
+ pci_dma_write(&s->dev, s->ru_base + s->ru_offset +
+ sizeof(eepro100_rx_t), buf, size);
s->statistics.rx_good_frames++;
eepro100_fr_interrupt(s);
s->ru_offset = le32_to_cpu(rx.link);
--
1.7.5.4
- [Qemu-devel] [0/9] Preliminary work for IOMMU emulation support; the easy bits (v2), David Gibson, 2011/09/05
- [Qemu-devel] [PATCH 6/9] e1000: Use PCI DMA stub functions, David Gibson, 2011/09/05
- [Qemu-devel] [PATCH 8/9] pcnet-pci: Use PCI DMA stub functions, David Gibson, 2011/09/05
- [Qemu-devel] [PATCH 1/9] Add stub functions for PCI device models to do PCI DMA, David Gibson, 2011/09/05
- [Qemu-devel] [PATCH 5/9] es1370: Use PCI DMA stub functions, David Gibson, 2011/09/05
- [Qemu-devel] [PATCH 7/9] lsi53c895a: Use PCI DMA stub functions, David Gibson, 2011/09/05
- [Qemu-devel] [PATCH 2/9] rtl8139: Use PCI DMA stub functions, David Gibson, 2011/09/05
- [Qemu-devel] [PATCH 4/9] ac97: Use PCI DMA stub functions, David Gibson, 2011/09/05
- [Qemu-devel] [PATCH 3/9] eepro100: Use PCI DMA stub functions,
David Gibson <=
- [Qemu-devel] [PATCH 9/9] intel-hda: Use PCI DMA stub functions, David Gibson, 2011/09/05
- Re: [Qemu-devel] [0/9] Preliminary work for IOMMU emulation support; the easy bits (v2), David Gibson, 2011/09/16