[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 06/10] e1000: Use PCI DMA stub functions
From: |
David Gibson |
Subject: |
[Qemu-devel] [PATCH 06/10] e1000: Use PCI DMA stub functions |
Date: |
Thu, 1 Sep 2011 15:00:59 +1000 |
From: Eduard - Gabriel Munteanu <address@hidden>
This updates the e1000 device emulation to use the explicit PCI DMA
functions, instead of directly calling physical memory access functions.
Signed-off-by: Eduard - Gabriel Munteanu <address@hidden>
Signed-off-by: David Gibson <address@hidden>
---
hw/e1000.c | 29 +++++++++++++++--------------
1 files changed, 15 insertions(+), 14 deletions(-)
diff --git a/hw/e1000.c b/hw/e1000.c
index a6d12c5..b782b49 100644
--- a/hw/e1000.c
+++ b/hw/e1000.c
@@ -31,6 +31,7 @@
#include "net/checksum.h"
#include "loader.h"
#include "sysemu.h"
+#include "dma.h"
#include "e1000_hw.h"
@@ -465,7 +466,7 @@ process_tx_desc(E1000State *s, struct e1000_tx_desc *dp)
bytes = split_size;
if (tp->size + bytes > msh)
bytes = msh - tp->size;
- cpu_physical_memory_read(addr, tp->data + tp->size, bytes);
+ pci_dma_read(&s->dev, addr, tp->data + tp->size, bytes);
if ((sz = tp->size + bytes) >= hdr && tp->size < hdr)
memmove(tp->header, tp->data, hdr);
tp->size = sz;
@@ -480,7 +481,7 @@ process_tx_desc(E1000State *s, struct e1000_tx_desc *dp)
// context descriptor TSE is not set, while data descriptor TSE is set
DBGOUT(TXERR, "TCP segmentaion Error\n");
} else {
- cpu_physical_memory_read(addr, tp->data + tp->size, split_size);
+ pci_dma_read(&s->dev, addr, tp->data + tp->size, split_size);
tp->size += split_size;
}
@@ -496,7 +497,7 @@ process_tx_desc(E1000State *s, struct e1000_tx_desc *dp)
}
static uint32_t
-txdesc_writeback(target_phys_addr_t base, struct e1000_tx_desc *dp)
+txdesc_writeback(E1000State *s, dma_addr_t base, struct e1000_tx_desc *dp)
{
uint32_t txd_upper, txd_lower = le32_to_cpu(dp->lower.data);
@@ -505,8 +506,8 @@ txdesc_writeback(target_phys_addr_t base, struct
e1000_tx_desc *dp)
txd_upper = (le32_to_cpu(dp->upper.data) | E1000_TXD_STAT_DD) &
~(E1000_TXD_STAT_EC | E1000_TXD_STAT_LC | E1000_TXD_STAT_TU);
dp->upper.data = cpu_to_le32(txd_upper);
- cpu_physical_memory_write(base + ((char *)&dp->upper - (char *)dp),
- (void *)&dp->upper, sizeof(dp->upper));
+ pci_dma_write(&s->dev, base + ((char *)&dp->upper - (char *)dp),
+ (void *)&dp->upper, sizeof(dp->upper));
return E1000_ICR_TXDW;
}
@@ -521,7 +522,7 @@ static uint64_t tx_desc_base(E1000State *s)
static void
start_xmit(E1000State *s)
{
- target_phys_addr_t base;
+ dma_addr_t base;
struct e1000_tx_desc desc;
uint32_t tdh_start = s->mac_reg[TDH], cause = E1000_ICS_TXQE;
@@ -533,14 +534,14 @@ start_xmit(E1000State *s)
while (s->mac_reg[TDH] != s->mac_reg[TDT]) {
base = tx_desc_base(s) +
sizeof(struct e1000_tx_desc) * s->mac_reg[TDH];
- cpu_physical_memory_read(base, (void *)&desc, sizeof(desc));
+ pci_dma_read(&s->dev, base, (void *)&desc, sizeof(desc));
DBGOUT(TX, "index %d: %p : %x %x\n", s->mac_reg[TDH],
(void *)(intptr_t)desc.buffer_addr, desc.lower.data,
desc.upper.data);
process_tx_desc(s, &desc);
- cause |= txdesc_writeback(base, &desc);
+ cause |= txdesc_writeback(s, base, &desc);
if (++s->mac_reg[TDH] * sizeof(desc) >= s->mac_reg[TDLEN])
s->mac_reg[TDH] = 0;
@@ -668,7 +669,7 @@ e1000_receive(VLANClientState *nc, const uint8_t *buf,
size_t size)
{
E1000State *s = DO_UPCAST(NICState, nc, nc)->opaque;
struct e1000_rx_desc desc;
- target_phys_addr_t base;
+ dma_addr_t base;
unsigned int n, rdt;
uint32_t rdh_start;
uint16_t vlan_special = 0;
@@ -713,7 +714,7 @@ e1000_receive(VLANClientState *nc, const uint8_t *buf,
size_t size)
desc_size = s->rxbuf_size;
}
base = rx_desc_base(s) + sizeof(desc) * s->mac_reg[RDH];
- cpu_physical_memory_read(base, (void *)&desc, sizeof(desc));
+ pci_dma_read(&s->dev, base, (void *)&desc, sizeof(desc));
desc.special = vlan_special;
desc.status |= (vlan_status | E1000_RXD_STAT_DD);
if (desc.buffer_addr) {
@@ -722,9 +723,9 @@ e1000_receive(VLANClientState *nc, const uint8_t *buf,
size_t size)
if (copy_size > s->rxbuf_size) {
copy_size = s->rxbuf_size;
}
- cpu_physical_memory_write(le64_to_cpu(desc.buffer_addr),
- (void *)(buf + desc_offset +
vlan_offset),
- copy_size);
+ pci_dma_write(&s->dev, le64_to_cpu(desc.buffer_addr),
+ (void *)(buf + desc_offset + vlan_offset),
+ copy_size);
}
desc_offset += desc_size;
desc.length = cpu_to_le16(desc_size);
@@ -738,7 +739,7 @@ e1000_receive(VLANClientState *nc, const uint8_t *buf,
size_t size)
} else { // as per intel docs; skip descriptors with null buf addr
DBGOUT(RX, "Null RX descriptor!!\n");
}
- cpu_physical_memory_write(base, (void *)&desc, sizeof(desc));
+ pci_dma_write(&s->dev, base, (void *)&desc, sizeof(desc));
if (++s->mac_reg[RDH] * sizeof(desc) >= s->mac_reg[RDLEN])
s->mac_reg[RDH] = 0;
--
1.7.5.4
- Re: [Qemu-devel] [PATCH 01/10] Add stub functions for PCI device models to do PCI DMA, (continued)
- [Qemu-devel] [PATCH 10/10] intel-hda: Use PCI DMA stub functions, David Gibson, 2011/09/01
- [Qemu-devel] [PATCH 03/10] eepro100: Use PCI DMA stub functions, David Gibson, 2011/09/01
- [Qemu-devel] [PATCH 04/10] ac97: Use PCI DMA stub functions, David Gibson, 2011/09/01
- [Qemu-devel] [PATCH 07/10] lsi53c895a: Use PCI DMA stub functions, David Gibson, 2011/09/01
- [Qemu-devel] [PATCH 08/10] pcnet-pci: Use PCI DMA stub functions, David Gibson, 2011/09/01
- [Qemu-devel] [PATCH 05/10] es1370: Use PCI DMA stub functions, David Gibson, 2011/09/01
- [Qemu-devel] [PATCH 02/10] rtl8139: Use PCI DMA stub functions, David Gibson, 2011/09/01
- [Qemu-devel] [PATCH 06/10] e1000: Use PCI DMA stub functions,
David Gibson <=
- [Qemu-devel] [PATCH 09/10] usb-ohci: Use PCI DMA stub functions, David Gibson, 2011/09/01
- Re: [Qemu-devel] [0/10] Preliminary work for IOMMU emulation support; the easy bits, Eduard - Gabriel Munteanu, 2011/09/01