[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-commits] [qemu/qemu] 71d6f1: target/riscv: Declare csr_ops[] with
From: |
Peter Maydell |
Subject: |
[Qemu-commits] [qemu/qemu] 71d6f1: target/riscv: Declare csr_ops[] with a known size |
Date: |
Thu, 18 Feb 2021 03:27:38 -0800 |
Branch: refs/heads/staging
Home: https://github.com/qemu/qemu
Commit: 71d6f12bf8e579934ec72292a8a72ba845004ffe
https://github.com/qemu/qemu/commit/71d6f12bf8e579934ec72292a8a72ba845004ffe
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M target/riscv/cpu.h
Log Message:
-----------
target/riscv: Declare csr_ops[] with a known size
csr_ops[] is currently declared with an unknown size in cpu.h.
Since the array size is known, let's do a complete declaration.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1611024723-14293-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: 03286024e8ef50f57ab4827830be0a5ccf11b241
https://github.com/qemu/qemu/commit/03286024e8ef50f57ab4827830be0a5ccf11b241
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M hw/misc/sifive_u_otp.c
Log Message:
-----------
hw/misc: sifive_u_otp: Use error_report() when block operation fails
At present when blk_pread() / blk_pwrite() fails, a guest error
is logged, but this is not really a guest error. Change to use
error_report() instead.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1611026585-29971-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: 2e3b9acb6373feb79c70e64e2a3bedb933379105
https://github.com/qemu/qemu/commit/2e3b9acb6373feb79c70e64e2a3bedb933379105
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M pc-bios/opensbi-riscv32-generic-fw_dynamic.bin
M pc-bios/opensbi-riscv32-generic-fw_dynamic.elf
M pc-bios/opensbi-riscv64-generic-fw_dynamic.bin
M pc-bios/opensbi-riscv64-generic-fw_dynamic.elf
M roms/opensbi
Log Message:
-----------
roms/opensbi: Upgrade from v0.8 to v0.9
Upgrade OpenSBI from v0.8 to v0.9 and the pre-built bios images.
The v0.9 release includes the following commits:
35bc810 docs/platform: Update QEMU parameter for fw_payload
78afe11 config.mk: Update QEMU run command for generic and sifive fu540
platforms
ec3e5b1 docs/platform: sifive_fu540: Update U-Boot instructions
7d61a68 README.md: fix markdown link formatting
a5f9104 lib/utils: fdt: Update FDT expand size to 1024 for reserved memory node
ec1abf6 include: sbi_bitops: Remove dead shift assignment in ffs/fls
8e47649 lib: Add sbi_strncmp implementation
2845d2d lib: utils: Add a macro in libfdt_env.h for strncmp
2cfd2fc lib: utils: Use strncmp in fdt_parse_hart_id()
937caee lib: sbi_misaligned_ldst: Determine transformed instruction length
correctly
4b18a2a firmware: fw_base: Improve exception stack setup in trap handler
9d56961 lib: sbi_trap: Fix hstatus.SPVP update in sbi_trap_redirect()
d7f87d9 platform: kendryte/k210: fixup FDT
e435ba0 lib: sbi_init: Avoid thundering hurd problem with coldboot_lock
4f3bad6 lib: sbi: Handle the case where MTVAL has illegal instruction address
7b0b289 lib: sbi: Remove redundant SBI_HART_HAS_PMP feature
74d1db7 lib: sbi: Improve PMP CSR detection and progamming
2c341f7 lib: sbi: Detect and print MHPM counters at boot-time
162d453 include: sbi: Few cosmetic changes in riscv_encoding.h
ebc8ebc lib: sbi: Improve HPM CSR read/write emulation
dcb10c0 lib: sbi: Don't handle VS-mode ecall in sbi_trap_handler()
bef63d6 include: Rename ECALL defines to match latest RISC-V spec
c1c7c3e lib: sbi_trap: Allow M-mode to M-mode ECALLs
6734304 lib: sbi: Allow specifying start mode to sbi_hsm_hart_start() API
7ccf6bf lib: sbi: Allow specifying mode in sbi_hart_pmp_check_addr() API
9f935a4 lib: utils: Improve fdt_cpu_fixup() implementation
172fa16 lib: sbi: Ensure coldboot HART supports next privilege mode
aaeca7e platform: generic: Don't mark non-MMU HARTs as invalid
7701ea1 lib: sbi: Fix PMP CSR detection
79bf80b lib: sbi_scratch: typo scatch
a04c465 makefile: fix clean directive
af4b50f Makefile: Build ELF, BIN and LD script in platform build directory
6ca0969 firmware: Add common FW_FDT_PATH compile-time option
9c07c51 firmware: Remove FW_PAYLOAD_FDT_PATH compile-time option
e9a4bfb Makefile: Allow padding zeros when converting DTB to C source
a0f2d4a platform: kendryte/k210: Add some padding for FDT fixups
dbeeacb include: sbi: Remove redundant includes from sbi_platform.h
a12d46a include: sbi: Remove pmp_region callbacks from sbi_platform_operations
a126886 lib: sbi: Configure PMP late in coldboot and warmboot path
f81d6f6 lib: sbi: Remove redundant hartid parameter from sbi_hart_init()
8b65005 include: sbi: Make hartmask pointer const in sbi_hartmask_test_hart()
b1678af lib: sbi: Add initial domain support
e73b92d lib: sbi: Extend sbi_hsm_hart_started_mask() for domains
3a30d2c lib: sbi: Extend sbi_hsm_hart_start() for domains
530e95b lib: sbi: Optimize sbi_hsm_hart_started_mask() implementation
3e20037 lib: sbi: Extend sbi_system_reset() for domains
5edbb7c lib: utils: Update fdt_reserved_memory_fixup() to use current domain
5fd99db lib: utils: Update fdt_cpu_fixup() to use current domain
e856462 lib: sbi: Remove redundant sbi_hart_pmp_xyz() functions
c10c30b lib: sbi: Configure PMP based on domain memory regions
c347408 lib: sbi: Display domain details in boot prints
fdf5d5c docs: Add initial documentation for domain support
74c0ea1 lib: utils: Implement "ranges" property parsing
bf21632 lib: sbi: Detect PMP granularity and number of address bits
a809f40 lib: sbi: Improve boot time print with additional PMP information
914f81f Makefile: Add option to use toolchain default ABI and ISA string
48616b3 lib: sbi: Improve boot prints in cold boot sequence
781cafd docs: fix a typo error
54a7734 include: sbi: Add SBI SRST extension related defines
c4acc60 include: sbi: Remove opensbi specific reset type defines
da07479 platform: Remove dummy system reset functions
5c429ae lib: sbi: Improve system reset platform operations
548d03e lib: sbi: Implement System Reset (SRST) SBI extension
2677324 firmware: fw_base: Optimize trap handler for RV32 systems
8d2edc4 lib: sbi: Fix sbi_hart_switch_mode() for u-mode
3d921fa lib: sbi: Fix typo in sbi_domain_finalize()
4e37022 lib: sbi: Fix domain_count check in sbi_domain_finalize()
c709d40 lib: sbi: Auto start domain only if boot HART within limits
c1f6d89 include: sbi: Use lower bits for domain memory region permissions
62ea4f4 lib: sbi: Override domain boot HART when coldboot HART assigned to it
555e737 lib: sbi: Add error prints in sbi_domain_finalize()
9b65dca include: sbi: Add domains_init() platform operation
c0d2baa docs: Add domain device tree binding documentation
ba741ea lib: utils: Add helper routines to populate domains from FDT
4fffb53 platform: generic: Populate domains from FDT
e7da0b4 lib: utils/libfdt: Upgrade to v1.6.0 release
2179777 lib: utils: Allow FDT domain iteration functions to fail
7baccfc lib: sbi: Add function to register new domain
6fc1986 lib: utils: Remove fdt_domain_get() function
a029bd9 lib: sbi: Remove domain_get() platform callback function
7dcb1e1 lib: sbi: Fix sign-extension in sbi_misaligned_load_handler()
80bc506 lib: sbi: Replace args with trap registers in ecall handler
b7df5e4 lib: sbi: Introduce sbi_trap_exit() API
12394a2 lib: sbi: Allow custom local TLB flush function
0d49c3b lib: utils: Fix shakti uart implementation
db56341 lib: sbi: Allow platforms to provide root domain memory regions
e884416 include: sbi: No need to pack struct sbi_trap_regs
386eba2 include: sbi: No need to pack struct sbi_scratch
1bbf361 include: sbi: Don't pack struct sbi_platform and sbi_platform_operations
da5293f platform: template: Fix compile error
234ed8e include: Bump-up version to 0.9
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: 20210119234438.10132-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: 6f660d7105fcee4f982eaa75237cf69025be670f
https://github.com/qemu/qemu/commit/6f660d7105fcee4f982eaa75237cf69025be670f
Author: Yifei Jiang <jiangyifei@huawei.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
A target/riscv/arch_dump.c
M target/riscv/cpu.c
M target/riscv/cpu.h
M target/riscv/cpu_bits.h
M target/riscv/meson.build
Log Message:
-----------
target-riscv: support QMP dump-guest-memory
Add the support needed for creating prstatus elf notes. This allows
us to use QMP dump-guest-memory.
Now ELF notes of RISC-V only contain prstatus elf notes.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Message-id: 20210201124458.1248-2-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: 67c7645f2a83dbd4fd030a563da61cab41dd5807
https://github.com/qemu/qemu/commit/67c7645f2a83dbd4fd030a563da61cab41dd5807
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M hw/block/m25p80.c
Log Message:
-----------
hw/block: m25p80: Add ISSI SPI flash support
This adds the ISSI SPI flash support. The number of dummy cycles in
fast read, fast read dual output and fast read quad output commands
is currently using the default 8. Likewise, the same default value
is used for fast read dual/quad I/O command. Per the datasheet [1],
the number of dummy cycles is configurable, but this is not modeled
at present.
For flash whose size is larger than 16 MiB, the sequence of 3-byte
address along with EXTADD bit in the bank address register (BAR) is
not supported. We assume that guest software always uses op codes
with 4-byte address sequence. Fortunately, this is the case for both
U-Boot and Linux spi-nor drivers.
QPI (Quad Peripheral Interface) that supports 2-cycle instruction
has different default values for dummy cycles of fast read family
commands, and is unsupported at the time being.
[1] http://www.issi.com/WW/pdf/25LP-WP256.pdf
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: d611279552895838cee3d0de614f49a17e2e6b76
https://github.com/qemu/qemu/commit/d611279552895838cee3d0de614f49a17e2e6b76
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M hw/block/m25p80.c
Log Message:
-----------
hw/block: m25p80: Add various ISSI flash information
This updates the flash information table to include various ISSI
flashes that are supported by upstream U-Boot and Linux kernel.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: 04a4dc019c3ed59361b0e9c0a81e3d92d6dd9ebc
https://github.com/qemu/qemu/commit/04a4dc019c3ed59361b0e9c0a81e3d92d6dd9ebc
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M hw/ssi/Kconfig
M hw/ssi/meson.build
A hw/ssi/sifive_spi.c
A include/hw/ssi/sifive_spi.h
Log Message:
-----------
hw/ssi: Add SiFive SPI controller support
This adds the SiFive SPI controller model for the FU540 SoC.
The direct memory-mapped SPI flash mode is unsupported.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-4-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: 26bcd6d98c1f6943d6193a223274c14734c1cc16
https://github.com/qemu/qemu/commit/26bcd6d98c1f6943d6193a223274c14734c1cc16
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M hw/riscv/Kconfig
M hw/riscv/sifive_u.c
M include/hw/riscv/sifive_u.h
Log Message:
-----------
hw/riscv: sifive_u: Add QSPI0 controller and connect a flash
This adds the QSPI0 controller to the SoC, and connects an ISSI
25WP256 flash to it. The generation of corresponding device tree
source fragment is also added.
Since the direct memory-mapped mode is not supported by the SiFive
SPI model, the <reg> property does not populate the second group
which represents the memory mapped address of the SPI flash.
With this commit, upstream U-Boot for the SiFive HiFive Unleashed
board can boot on QEMU 'sifive_u' out of the box. This allows users
to develop and test the recommended RISC-V boot flow with a real
world use case: ZSBL (in QEMU) loads U-Boot SPL from SPI flash to
L2LIM, then U-Boot SPL loads the payload from SPI flash that is
combined with OpenSBI fw_dynamic firmware and U-Boot proper.
Specify machine property `msel` to 6 to allow booting from the SPI
flash. U-Boot spl is directly loaded via `-bios`, and subsequent
payload is stored in the SPI flash image. Example command line:
$ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -smp 5 -m 8G \
-bios u-boot-spl.bin -drive file=spi-nor.img,if=mtd
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-5-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: 4e824db4e9c5a332e6e8d7bee3ca8548d071958d
https://github.com/qemu/qemu/commit/4e824db4e9c5a332e6e8d7bee3ca8548d071958d
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M hw/riscv/Kconfig
M hw/riscv/sifive_u.c
M include/hw/riscv/sifive_u.h
Log Message:
-----------
hw/riscv: sifive_u: Add QSPI2 controller and connect an SD card
This adds the QSPI2 controller to the SoC, and connects an SD
card to it. The generation of corresponding device tree source
fragment is also added.
Specify machine property `msel` to 11 to boot the same upstream
U-Boot SPL and payload image for the SiFive HiFive Unleashed board.
Note subsequent payload is stored in the SD card image.
$ qemu-system-riscv64 -nographic -M sifive_u,msel=11 -smp 5 -m 8G \
-bios u-boot-spl.bin -drive file=sdcard.img,if=sd
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-6-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: c83a72930b7a8e4077f2dfa76217a518fdae4308
https://github.com/qemu/qemu/commit/c83a72930b7a8e4077f2dfa76217a518fdae4308
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M include/hw/riscv/sifive_u.h
Log Message:
-----------
hw/riscv: sifive_u: Change SIFIVE_U_GEM_IRQ to decimal value
All other peripherals' IRQs are in the format of decimal value.
Change SIFIVE_U_GEM_IRQ to be consistent.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-7-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: 88d4b7fae10aceb13eeb85694b6185e0ff135d95
https://github.com/qemu/qemu/commit/88d4b7fae10aceb13eeb85694b6185e0ff135d95
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M docs/system/targets.rst
Log Message:
-----------
docs/system: Sort targets in alphabetical order
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-8-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: fbfe1882e3c9ea294a42a83770fee355d2fc06e2
https://github.com/qemu/qemu/commit/fbfe1882e3c9ea294a42a83770fee355d2fc06e2
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
A docs/system/target-riscv.rst
M docs/system/targets.rst
Log Message:
-----------
docs/system: Add RISC-V documentation
Add RISC-V system emulator documentation for generic information.
`Board-specific documentation` and `RISC-V CPU features` are only
a placeholder and will be added in the future.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-9-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: 72ff3acee8a11158de3c75e081e399cd63aa9ccd
https://github.com/qemu/qemu/commit/72ff3acee8a11158de3c75e081e399cd63aa9ccd
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
A docs/system/riscv/sifive_u.rst
M docs/system/target-riscv.rst
Log Message:
-----------
docs/system: riscv: Add documentation for sifive_u machine
This adds detailed documentation for RISC-V `sifive_u` machine,
including the following information:
- Supported devices
- Hardware configuration information
- Boot options
- Machine-specific options
- Running Linux kernel
- Running VxWorks kernel
- Running U-Boot, and with an alternate configuration
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Message-id: 20210126060007.12904-10-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: 3a14553e2f05a7d9d4e16216d80a3ee55302b90f
https://github.com/qemu/qemu/commit/3a14553e2f05a7d9d4e16216d80a3ee55302b90f
Author: Laurent Vivier <laurent@vivier.eu>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M hw/rtc/goldfish_rtc.c
Log Message:
-----------
goldfish_rtc: re-arm the alarm after migration
After a migration the clock offset is updated, but we also
need to re-arm the alarm if needed.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201220112615.933036-7-laurent@vivier.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: ee3d64e49e8f0d0f584666227050e806f36b8af1
https://github.com/qemu/qemu/commit/ee3d64e49e8f0d0f584666227050e806f36b8af1
Author: Alistair Francis <alistair.francis@wdc.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M MAINTAINERS
Log Message:
-----------
MAINTAINERS: Add a SiFive machine section
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Message-id:
6bc077e5ae4a9512c8adf81ae194718f2f17c402.1612836645.git.alistair.francis@wdc.com
Commit: 939609de4efa07a5690e3263e33a3acf9def2741
https://github.com/qemu/qemu/commit/939609de4efa07a5690e3263e33a3acf9def2741
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M hw/riscv/microchip_pfsoc.c
M hw/riscv/opentitan.c
M hw/riscv/sifive_e.c
M hw/riscv/sifive_u.c
M hw/riscv/spike.c
M hw/riscv/virt.c
Log Message:
-----------
hw/riscv: Drop 'struct MemmapEntry'
There is already a MemMapEntry type defined in hwaddr.h. Let's drop
the RISC-V defined `struct MemmapEntry` and use the existing one.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210122122958.12311-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: 7fce93d604536188d17aa6a98010d0850750adbd
https://github.com/qemu/qemu/commit/7fce93d604536188d17aa6a98010d0850750adbd
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M hw/riscv/virt.c
Log Message:
-----------
hw/riscv: virt: Drop the 'link_up' parameter of gpex_pcie_init()
`link_up` is never used in gpex_pcie_init(). Drop it.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210122122958.12311-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: a08aed2f3da7999f0e7d8611eb40b112a156a45e
https://github.com/qemu/qemu/commit/a08aed2f3da7999f0e7d8611eb40b112a156a45e
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M hw/riscv/virt.c
Log Message:
-----------
hw/riscv: virt: Limit RAM size in a 32-bit system
RV32 supports 34-bit physical address hence the maximum RAM size
should be limitted. Limit the RAM size to 10 GiB, which leaves
some room for PCIe high mmio space.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210122122958.12311-4-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: d0867d2dad4125d2295b28d6f91fa49cf034ffd2
https://github.com/qemu/qemu/commit/d0867d2dad4125d2295b28d6f91fa49cf034ffd2
Author: Bin Meng <bin.meng@windriver.com>
Date: 2021-02-17 (Wed, 17 Feb 2021)
Changed paths:
M hw/riscv/virt.c
Log Message:
-----------
hw/riscv: virt: Map high mmio for PCIe
Some peripherals require 64-bit PCI address, so let's map the high
mmio space for PCIe.
For RV32, the address is hardcoded to below 4 GiB from the highest
accessible physical address. For RV64, the base address depends on
top of RAM and is aligned to its size which is using 16 GiB for now.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210122122958.12311-5-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit: af0ce293802cdf37bb6f46013c887b542bdaaeaa
https://github.com/qemu/qemu/commit/af0ce293802cdf37bb6f46013c887b542bdaaeaa
Author: Peter Maydell <peter.maydell@linaro.org>
Date: 2021-02-18 (Thu, 18 Feb 2021)
Changed paths:
M MAINTAINERS
A docs/system/riscv/sifive_u.rst
A docs/system/target-riscv.rst
M docs/system/targets.rst
M hw/block/m25p80.c
M hw/misc/sifive_u_otp.c
M hw/riscv/Kconfig
M hw/riscv/microchip_pfsoc.c
M hw/riscv/opentitan.c
M hw/riscv/sifive_e.c
M hw/riscv/sifive_u.c
M hw/riscv/spike.c
M hw/riscv/virt.c
M hw/rtc/goldfish_rtc.c
M hw/ssi/Kconfig
M hw/ssi/meson.build
A hw/ssi/sifive_spi.c
M include/hw/riscv/sifive_u.h
A include/hw/ssi/sifive_spi.h
M pc-bios/opensbi-riscv32-generic-fw_dynamic.bin
M pc-bios/opensbi-riscv32-generic-fw_dynamic.elf
M pc-bios/opensbi-riscv64-generic-fw_dynamic.bin
M pc-bios/opensbi-riscv64-generic-fw_dynamic.elf
M roms/opensbi
A target/riscv/arch_dump.c
M target/riscv/cpu.c
M target/riscv/cpu.h
M target/riscv/cpu_bits.h
M target/riscv/meson.build
Log Message:
-----------
Merge remote-tracking branch
'remotes/alistair/tags/pull-riscv-to-apply-20210217-1' into staging
RISC-V PR for 6.0
This PR is a collection of RISC-V patches:
- Improvements to SiFive U OTP
- Upgrade OpenSBI to v0.9
- Support the QMP dump-guest-memory
- Add support for the SiFive SPI controller (sifive_u)
- Initial RISC-V system documentation
- A fix for the Goldfish RTC
- MAINTAINERS updates
- Support for high PCIe memory in the virt machine
# gpg: Signature made Thu 18 Feb 2021 01:52:15 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20210217-1:
hw/riscv: virt: Map high mmio for PCIe
hw/riscv: virt: Limit RAM size in a 32-bit system
hw/riscv: virt: Drop the 'link_up' parameter of gpex_pcie_init()
hw/riscv: Drop 'struct MemmapEntry'
MAINTAINERS: Add a SiFive machine section
goldfish_rtc: re-arm the alarm after migration
docs/system: riscv: Add documentation for sifive_u machine
docs/system: Add RISC-V documentation
docs/system: Sort targets in alphabetical order
hw/riscv: sifive_u: Change SIFIVE_U_GEM_IRQ to decimal value
hw/riscv: sifive_u: Add QSPI2 controller and connect an SD card
hw/riscv: sifive_u: Add QSPI0 controller and connect a flash
hw/ssi: Add SiFive SPI controller support
hw/block: m25p80: Add various ISSI flash information
hw/block: m25p80: Add ISSI SPI flash support
target-riscv: support QMP dump-guest-memory
roms/opensbi: Upgrade from v0.8 to v0.9
hw/misc: sifive_u_otp: Use error_report() when block operation fails
target/riscv: Declare csr_ops[] with a known size
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Compare: https://github.com/qemu/qemu/compare/4c53b2ed1228...af0ce293802c
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-commits] [qemu/qemu] 71d6f1: target/riscv: Declare csr_ops[] with a known size,
Peter Maydell <=