[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-commits] [COMMIT 4c3df0e] ide: split cmd646 and piix from pci.c
|
From: |
Anthony Liguori |
|
Subject: |
[Qemu-commits] [COMMIT 4c3df0e] ide: split cmd646 and piix from pci.c |
|
Date: |
Mon, 12 Oct 2009 15:19:26 -0000 |
From: Juan Quintela <address@hidden>
This patch splits cmd646 specific code from pci.c.
This patch splits piix4 specific code from pci.c.
And compile new piix.o and cmd646.o when they are needed.
The only change that is not code movemet is removal of cmd646 specific parts
in bmdma_readb/writeb for piix.
Patchworks-ID: 35301
Signed-off-by: Juan Quintela <address@hidden>
Signed-off-by: Anthony Liguori <address@hidden>
diff --git a/Makefile.target b/Makefile.target
index 94bc03b..8d146c5 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -188,7 +188,7 @@ obj-y += rtl8139.o
obj-y += e1000.o
# Hardware support
-obj-i386-y = ide/core.o ide/qdev.o ide/isa.o ide/pci.o
+obj-i386-y = ide/core.o ide/qdev.o ide/isa.o ide/pci.o ide/piix.o
obj-i386-y += pckbd.o $(sound-obj-y) dma.o
obj-i386-y += vga.o vga-pci.o vga-isa.o
obj-i386-y += fdc.o mc146818rtc.o serial.o i8259.o i8254.o pcspk.o pc.o
@@ -199,6 +199,7 @@ obj-i386-y += ne2000-isa.o
# shared objects
obj-ppc-y = ppc.o ide/core.o ide/qdev.o ide/isa.o ide/pci.o ide/macio.o
+obj-ppc-y += ide/cmd646.o
obj-ppc-y += vga.o vga-pci.o $(sound-obj-y) dma.o openpic.o
# PREP target
obj-ppc-y += pckbd.o serial.o i8259.o i8254.o fdc.o mc146818rtc.o
@@ -221,7 +222,7 @@ obj-mips-y = mips_r4k.o mips_jazz.o mips_malta.o
mips_mipssim.o
obj-mips-y += mips_timer.o mips_int.o dma.o vga.o serial.o i8254.o i8259.o
rc4030.o
obj-mips-y += vga-pci.o vga-isa.o vga-isa-mm.o
obj-mips-y += g364fb.o jazz_led.o dp8393x.o
-obj-mips-y += ide/core.o ide/qdev.o ide/isa.o ide/pci.o
+obj-mips-y += ide/core.o ide/qdev.o ide/isa.o ide/pci.o ide/piix.o
obj-mips-y += gt64xxx.o pckbd.o fdc.o mc146818rtc.o usb-uhci.o acpi.o ds1225y.o
obj-mips-y += piix4.o parallel.o cirrus_vga.o pcspk.o $(sound-obj-y)
obj-mips-y += mipsnet.o ne2000-isa.o
@@ -254,7 +255,7 @@ obj-cris-y += pflash_cfi02.o
ifeq ($(TARGET_ARCH), sparc64)
obj-sparc-y = sun4u.o pckbd.o apb_pci.o
-obj-sparc-y += ide/core.o ide/qdev.o ide/pci.o
+obj-sparc-y += ide/core.o ide/qdev.o ide/pci.o ide/cmd646.o
obj-sparc-y += vga.o vga-pci.o
obj-sparc-y += fdc.o mc146818rtc.o serial.o
obj-sparc-y += cirrus_vga.o parallel.o
diff --git a/hw/ide/cmd646.c b/hw/ide/cmd646.c
new file mode 100644
index 0000000..8c8daa1
--- /dev/null
+++ b/hw/ide/cmd646.c
@@ -0,0 +1,280 @@
+/*
+ * QEMU IDE Emulation: PCI cmd646 support.
+ *
+ * Copyright (c) 2003 Fabrice Bellard
+ * Copyright (c) 2006 Openedhand Ltd.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include <hw/hw.h>
+#include <hw/pc.h>
+#include <hw/pci.h>
+#include <hw/isa.h>
+#include "block.h"
+#include "block_int.h"
+#include "sysemu.h"
+#include "dma.h"
+
+#include <hw/ide/pci.h>
+
+/* CMD646 specific */
+#define MRDMODE 0x71
+#define MRDMODE_INTR_CH0 0x04
+#define MRDMODE_INTR_CH1 0x08
+#define MRDMODE_BLK_CH0 0x10
+#define MRDMODE_BLK_CH1 0x20
+#define UDIDETCR0 0x73
+#define UDIDETCR1 0x7B
+
+static void cmd646_update_irq(PCIIDEState *d);
+
+static void ide_map(PCIDevice *pci_dev, int region_num,
+ uint32_t addr, uint32_t size, int type)
+{
+ PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, pci_dev);
+ IDEBus *bus;
+
+ if (region_num <= 3) {
+ bus = &d->bus[(region_num >> 1)];
+ if (region_num & 1) {
+ register_ioport_read(addr + 2, 1, 1, ide_status_read, bus);
+ register_ioport_write(addr + 2, 1, 1, ide_cmd_write, bus);
+ } else {
+ register_ioport_write(addr, 8, 1, ide_ioport_write, bus);
+ register_ioport_read(addr, 8, 1, ide_ioport_read, bus);
+
+ /* data ports */
+ register_ioport_write(addr, 2, 2, ide_data_writew, bus);
+ register_ioport_read(addr, 2, 2, ide_data_readw, bus);
+ register_ioport_write(addr, 4, 4, ide_data_writel, bus);
+ register_ioport_read(addr, 4, 4, ide_data_readl, bus);
+ }
+ }
+}
+
+static uint32_t bmdma_readb(void *opaque, uint32_t addr)
+{
+ BMDMAState *bm = opaque;
+ PCIIDEState *pci_dev;
+ uint32_t val;
+
+ switch(addr & 3) {
+ case 0:
+ val = bm->cmd;
+ break;
+ case 1:
+ pci_dev = bm->pci_dev;
+ if (pci_dev->type == IDE_TYPE_CMD646) {
+ val = pci_dev->dev.config[MRDMODE];
+ } else {
+ val = 0xff;
+ }
+ break;
+ case 2:
+ val = bm->status;
+ break;
+ case 3:
+ pci_dev = bm->pci_dev;
+ if (pci_dev->type == IDE_TYPE_CMD646) {
+ if (bm == &pci_dev->bmdma[0])
+ val = pci_dev->dev.config[UDIDETCR0];
+ else
+ val = pci_dev->dev.config[UDIDETCR1];
+ } else {
+ val = 0xff;
+ }
+ break;
+ default:
+ val = 0xff;
+ break;
+ }
+#ifdef DEBUG_IDE
+ printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
+#endif
+ return val;
+}
+
+static void bmdma_writeb(void *opaque, uint32_t addr, uint32_t val)
+{
+ BMDMAState *bm = opaque;
+ PCIIDEState *pci_dev;
+#ifdef DEBUG_IDE
+ printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
+#endif
+ switch(addr & 3) {
+ case 1:
+ pci_dev = bm->pci_dev;
+ if (pci_dev->type == IDE_TYPE_CMD646) {
+ pci_dev->dev.config[MRDMODE] =
+ (pci_dev->dev.config[MRDMODE] & ~0x30) | (val & 0x30);
+ cmd646_update_irq(pci_dev);
+ }
+ break;
+ case 2:
+ bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val &
0x06);
+ break;
+ case 3:
+ pci_dev = bm->pci_dev;
+ if (pci_dev->type == IDE_TYPE_CMD646) {
+ if (bm == &pci_dev->bmdma[0])
+ pci_dev->dev.config[UDIDETCR0] = val;
+ else
+ pci_dev->dev.config[UDIDETCR1] = val;
+ }
+ break;
+ }
+}
+
+static void bmdma_map(PCIDevice *pci_dev, int region_num,
+ uint32_t addr, uint32_t size, int type)
+{
+ PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, pci_dev);
+ int i;
+
+ for(i = 0;i < 2; i++) {
+ BMDMAState *bm = &d->bmdma[i];
+ d->bus[i].bmdma = bm;
+ bm->pci_dev = DO_UPCAST(PCIIDEState, dev, pci_dev);
+ bm->bus = d->bus+i;
+ qemu_add_vm_change_state_handler(ide_dma_restart_cb, bm);
+
+ register_ioport_write(addr, 1, 1, bmdma_cmd_writeb, bm);
+
+ register_ioport_write(addr + 1, 3, 1, bmdma_writeb, bm);
+ register_ioport_read(addr, 4, 1, bmdma_readb, bm);
+
+ register_ioport_write(addr + 4, 4, 1, bmdma_addr_writeb, bm);
+ register_ioport_read(addr + 4, 4, 1, bmdma_addr_readb, bm);
+ register_ioport_write(addr + 4, 4, 2, bmdma_addr_writew, bm);
+ register_ioport_read(addr + 4, 4, 2, bmdma_addr_readw, bm);
+ register_ioport_write(addr + 4, 4, 4, bmdma_addr_writel, bm);
+ register_ioport_read(addr + 4, 4, 4, bmdma_addr_readl, bm);
+ addr += 8;
+ }
+}
+
+/* XXX: call it also when the MRDMODE is changed from the PCI config
+ registers */
+static void cmd646_update_irq(PCIIDEState *d)
+{
+ int pci_level;
+ pci_level = ((d->dev.config[MRDMODE] & MRDMODE_INTR_CH0) &&
+ !(d->dev.config[MRDMODE] & MRDMODE_BLK_CH0)) ||
+ ((d->dev.config[MRDMODE] & MRDMODE_INTR_CH1) &&
+ !(d->dev.config[MRDMODE] & MRDMODE_BLK_CH1));
+ qemu_set_irq(d->dev.irq[0], pci_level);
+}
+
+/* the PCI irq level is the logical OR of the two channels */
+static void cmd646_set_irq(void *opaque, int channel, int level)
+{
+ PCIIDEState *d = opaque;
+ int irq_mask;
+
+ irq_mask = MRDMODE_INTR_CH0 << channel;
+ if (level)
+ d->dev.config[MRDMODE] |= irq_mask;
+ else
+ d->dev.config[MRDMODE] &= ~irq_mask;
+ cmd646_update_irq(d);
+}
+
+static void cmd646_reset(void *opaque)
+{
+ PCIIDEState *d = opaque;
+ unsigned int i;
+
+ for (i = 0; i < 2; i++)
+ ide_dma_cancel(&d->bmdma[i]);
+}
+
+/* CMD646 PCI IDE controller */
+static int pci_cmd646_ide_initfn(PCIDevice *dev)
+{
+ PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
+ uint8_t *pci_conf = d->dev.config;
+ qemu_irq *irq;
+
+ d->type = IDE_TYPE_CMD646;
+ pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_CMD);
+ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_CMD_646);
+
+ pci_conf[0x08] = 0x07; // IDE controller revision
+ pci_conf[0x09] = 0x8f;
+
+ pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_IDE);
+ pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
+
+ pci_conf[0x51] = 0x04; // enable IDE0
+ if (d->secondary) {
+ /* XXX: if not enabled, really disable the seconday IDE controller */
+ pci_conf[0x51] |= 0x08; /* enable IDE1 */
+ }
+
+ pci_register_bar(dev, 0, 0x8, PCI_ADDRESS_SPACE_IO, ide_map);
+ pci_register_bar(dev, 1, 0x4, PCI_ADDRESS_SPACE_IO, ide_map);
+ pci_register_bar(dev, 2, 0x8, PCI_ADDRESS_SPACE_IO, ide_map);
+ pci_register_bar(dev, 3, 0x4, PCI_ADDRESS_SPACE_IO, ide_map);
+ pci_register_bar(dev, 4, 0x10, PCI_ADDRESS_SPACE_IO, bmdma_map);
+
+ pci_conf[0x3d] = 0x01; // interrupt on pin 1
+
+ irq = qemu_allocate_irqs(cmd646_set_irq, d, 2);
+ ide_bus_new(&d->bus[0], &d->dev.qdev);
+ ide_bus_new(&d->bus[1], &d->dev.qdev);
+ ide_init2(&d->bus[0], NULL, NULL, irq[0]);
+ ide_init2(&d->bus[1], NULL, NULL, irq[1]);
+
+ register_savevm("ide", 0, 3, pci_ide_save, pci_ide_load, d);
+ qemu_register_reset(cmd646_reset, d);
+ cmd646_reset(d);
+ return 0;
+}
+
+void pci_cmd646_ide_init(PCIBus *bus, DriveInfo **hd_table,
+ int secondary_ide_enabled)
+{
+ PCIDevice *dev;
+
+ dev = pci_create(bus, -1, "CMD646 IDE");
+ qdev_prop_set_uint32(&dev->qdev, "secondary", secondary_ide_enabled);
+ qdev_init_nofail(&dev->qdev);
+
+ pci_ide_create_devs(dev, hd_table);
+}
+
+static PCIDeviceInfo cmd646_ide_info[] = {
+ {
+ .qdev.name = "CMD646 IDE",
+ .qdev.size = sizeof(PCIIDEState),
+ .init = pci_cmd646_ide_initfn,
+ .qdev.props = (Property[]) {
+ DEFINE_PROP_UINT32("secondary", PCIIDEState, secondary, 0),
+ DEFINE_PROP_END_OF_LIST(),
+ },
+ },{
+ /* end of list */
+ }
+};
+
+static void cmd646_ide_register(void)
+{
+ pci_qdev_register_many(cmd646_ide_info);
+}
+device_init(cmd646_ide_register);
diff --git a/hw/ide/pci.c b/hw/ide/pci.c
index af4d7a4..dea126a 100644
--- a/hw/ide/pci.c
+++ b/hw/ide/pci.c
@@ -33,44 +33,6 @@
#include <hw/ide/pci.h>
-/***********************************************************/
-/* PCI IDE definitions */
-
-/* CMD646 specific */
-#define MRDMODE 0x71
-#define MRDMODE_INTR_CH0 0x04
-#define MRDMODE_INTR_CH1 0x08
-#define MRDMODE_BLK_CH0 0x10
-#define MRDMODE_BLK_CH1 0x20
-#define UDIDETCR0 0x73
-#define UDIDETCR1 0x7B
-
-static void cmd646_update_irq(PCIIDEState *d);
-
-static void ide_map(PCIDevice *pci_dev, int region_num,
- uint32_t addr, uint32_t size, int type)
-{
- PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, pci_dev);
- IDEBus *bus;
-
- if (region_num <= 3) {
- bus = &d->bus[(region_num >> 1)];
- if (region_num & 1) {
- register_ioport_read(addr + 2, 1, 1, ide_status_read, bus);
- register_ioport_write(addr + 2, 1, 1, ide_cmd_write, bus);
- } else {
- register_ioport_write(addr, 8, 1, ide_ioport_write, bus);
- register_ioport_read(addr, 8, 1, ide_ioport_read, bus);
-
- /* data ports */
- register_ioport_write(addr, 2, 2, ide_data_writew, bus);
- register_ioport_read(addr, 2, 2, ide_data_readw, bus);
- register_ioport_write(addr, 4, 4, ide_data_writel, bus);
- register_ioport_read(addr, 4, 4, ide_data_readl, bus);
- }
- }
-}
-
void bmdma_cmd_writeb(void *opaque, uint32_t addr, uint32_t val)
{
BMDMAState *bm = opaque;
@@ -92,79 +54,6 @@ void bmdma_cmd_writeb(void *opaque, uint32_t addr, uint32_t
val)
}
}
-static uint32_t bmdma_readb(void *opaque, uint32_t addr)
-{
- BMDMAState *bm = opaque;
- PCIIDEState *pci_dev;
- uint32_t val;
-
- switch(addr & 3) {
- case 0:
- val = bm->cmd;
- break;
- case 1:
- pci_dev = bm->pci_dev;
- if (pci_dev->type == IDE_TYPE_CMD646) {
- val = pci_dev->dev.config[MRDMODE];
- } else {
- val = 0xff;
- }
- break;
- case 2:
- val = bm->status;
- break;
- case 3:
- pci_dev = bm->pci_dev;
- if (pci_dev->type == IDE_TYPE_CMD646) {
- if (bm == &pci_dev->bmdma[0])
- val = pci_dev->dev.config[UDIDETCR0];
- else
- val = pci_dev->dev.config[UDIDETCR1];
- } else {
- val = 0xff;
- }
- break;
- default:
- val = 0xff;
- break;
- }
-#ifdef DEBUG_IDE
- printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
-#endif
- return val;
-}
-
-static void bmdma_writeb(void *opaque, uint32_t addr, uint32_t val)
-{
- BMDMAState *bm = opaque;
- PCIIDEState *pci_dev;
-#ifdef DEBUG_IDE
- printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
-#endif
- switch(addr & 3) {
- case 1:
- pci_dev = bm->pci_dev;
- if (pci_dev->type == IDE_TYPE_CMD646) {
- pci_dev->dev.config[MRDMODE] =
- (pci_dev->dev.config[MRDMODE] & ~0x30) | (val & 0x30);
- cmd646_update_irq(pci_dev);
- }
- break;
- case 2:
- bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val &
0x06);
- break;
- case 3:
- pci_dev = bm->pci_dev;
- if (pci_dev->type == IDE_TYPE_CMD646) {
- if (bm == &pci_dev->bmdma[0])
- pci_dev->dev.config[UDIDETCR0] = val;
- else
- pci_dev->dev.config[UDIDETCR1] = val;
- }
- break;
- }
-}
-
uint32_t bmdma_addr_readb(void *opaque, uint32_t addr)
{
BMDMAState *bm = opaque;
@@ -232,34 +121,6 @@ void bmdma_addr_writel(void *opaque, uint32_t addr,
uint32_t val)
bm->cur_addr = bm->addr;
}
-static void bmdma_map(PCIDevice *pci_dev, int region_num,
- uint32_t addr, uint32_t size, int type)
-{
- PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, pci_dev);
- int i;
-
- for(i = 0;i < 2; i++) {
- BMDMAState *bm = &d->bmdma[i];
- d->bus[i].bmdma = bm;
- bm->pci_dev = DO_UPCAST(PCIIDEState, dev, pci_dev);
- bm->bus = d->bus+i;
- qemu_add_vm_change_state_handler(ide_dma_restart_cb, bm);
-
- register_ioport_write(addr, 1, 1, bmdma_cmd_writeb, bm);
-
- register_ioport_write(addr + 1, 3, 1, bmdma_writeb, bm);
- register_ioport_read(addr, 4, 1, bmdma_readb, bm);
-
- register_ioport_write(addr + 4, 4, 1, bmdma_addr_writeb, bm);
- register_ioport_read(addr + 4, 4, 1, bmdma_addr_readb, bm);
- register_ioport_write(addr + 4, 4, 2, bmdma_addr_writew, bm);
- register_ioport_read(addr + 4, 4, 2, bmdma_addr_readw, bm);
- register_ioport_write(addr + 4, 4, 4, bmdma_addr_writel, bm);
- register_ioport_read(addr + 4, 4, 4, bmdma_addr_readl, bm);
- addr += 8;
- }
-}
-
void pci_ide_save(QEMUFile* f, void *opaque)
{
PCIIDEState *d = opaque;
@@ -342,202 +203,3 @@ void pci_ide_create_devs(PCIDevice *dev, DriveInfo
**hd_table)
ide_create_drive(d->bus+bus[i], unit[i], hd_table[i]);
}
}
-
-/* XXX: call it also when the MRDMODE is changed from the PCI config
- registers */
-static void cmd646_update_irq(PCIIDEState *d)
-{
- int pci_level;
- pci_level = ((d->dev.config[MRDMODE] & MRDMODE_INTR_CH0) &&
- !(d->dev.config[MRDMODE] & MRDMODE_BLK_CH0)) ||
- ((d->dev.config[MRDMODE] & MRDMODE_INTR_CH1) &&
- !(d->dev.config[MRDMODE] & MRDMODE_BLK_CH1));
- qemu_set_irq(d->dev.irq[0], pci_level);
-}
-
-/* the PCI irq level is the logical OR of the two channels */
-static void cmd646_set_irq(void *opaque, int channel, int level)
-{
- PCIIDEState *d = opaque;
- int irq_mask;
-
- irq_mask = MRDMODE_INTR_CH0 << channel;
- if (level)
- d->dev.config[MRDMODE] |= irq_mask;
- else
- d->dev.config[MRDMODE] &= ~irq_mask;
- cmd646_update_irq(d);
-}
-
-static void cmd646_reset(void *opaque)
-{
- PCIIDEState *d = opaque;
- unsigned int i;
-
- for (i = 0; i < 2; i++)
- ide_dma_cancel(&d->bmdma[i]);
-}
-
-/* CMD646 PCI IDE controller */
-static int pci_cmd646_ide_initfn(PCIDevice *dev)
-{
- PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
- uint8_t *pci_conf = d->dev.config;
- qemu_irq *irq;
-
- d->type = IDE_TYPE_CMD646;
- pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_CMD);
- pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_CMD_646);
-
- pci_conf[0x08] = 0x07; // IDE controller revision
- pci_conf[0x09] = 0x8f;
-
- pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_IDE);
- pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
-
- pci_conf[0x51] = 0x04; // enable IDE0
- if (d->secondary) {
- /* XXX: if not enabled, really disable the seconday IDE controller */
- pci_conf[0x51] |= 0x08; /* enable IDE1 */
- }
-
- pci_register_bar(dev, 0, 0x8, PCI_ADDRESS_SPACE_IO, ide_map);
- pci_register_bar(dev, 1, 0x4, PCI_ADDRESS_SPACE_IO, ide_map);
- pci_register_bar(dev, 2, 0x8, PCI_ADDRESS_SPACE_IO, ide_map);
- pci_register_bar(dev, 3, 0x4, PCI_ADDRESS_SPACE_IO, ide_map);
- pci_register_bar(dev, 4, 0x10, PCI_ADDRESS_SPACE_IO, bmdma_map);
-
- pci_conf[0x3d] = 0x01; // interrupt on pin 1
-
- irq = qemu_allocate_irqs(cmd646_set_irq, d, 2);
- ide_bus_new(&d->bus[0], &d->dev.qdev);
- ide_bus_new(&d->bus[1], &d->dev.qdev);
- ide_init2(&d->bus[0], NULL, NULL, irq[0]);
- ide_init2(&d->bus[1], NULL, NULL, irq[1]);
-
- register_savevm("ide", 0, 3, pci_ide_save, pci_ide_load, d);
- qemu_register_reset(cmd646_reset, d);
- cmd646_reset(d);
- return 0;
-}
-
-void pci_cmd646_ide_init(PCIBus *bus, DriveInfo **hd_table,
- int secondary_ide_enabled)
-{
- PCIDevice *dev;
-
- dev = pci_create(bus, -1, "CMD646 IDE");
- qdev_prop_set_uint32(&dev->qdev, "secondary", secondary_ide_enabled);
- qdev_init_nofail(&dev->qdev);
-
- pci_ide_create_devs(dev, hd_table);
-}
-
-static void piix3_reset(void *opaque)
-{
- PCIIDEState *d = opaque;
- uint8_t *pci_conf = d->dev.config;
- int i;
-
- for (i = 0; i < 2; i++)
- ide_dma_cancel(&d->bmdma[i]);
-
- pci_conf[0x04] = 0x00;
- pci_conf[0x05] = 0x00;
- pci_conf[0x06] = 0x80; /* FBC */
- pci_conf[0x07] = 0x02; // PCI_status_devsel_medium
- pci_conf[0x20] = 0x01; /* BMIBA: 20-23h */
-}
-
-static int pci_piix_ide_initfn(PCIIDEState *d)
-{
- uint8_t *pci_conf = d->dev.config;
-
- pci_conf[0x09] = 0x80; // legacy ATA mode
- pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_IDE);
- pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
-
- qemu_register_reset(piix3_reset, d);
- piix3_reset(d);
-
- pci_register_bar(&d->dev, 4, 0x10, PCI_ADDRESS_SPACE_IO, bmdma_map);
-
- register_savevm("ide", 0, 3, pci_ide_save, pci_ide_load, d);
-
- ide_bus_new(&d->bus[0], &d->dev.qdev);
- ide_bus_new(&d->bus[1], &d->dev.qdev);
- ide_init_ioport(&d->bus[0], 0x1f0, 0x3f6);
- ide_init_ioport(&d->bus[1], 0x170, 0x376);
-
- ide_init2(&d->bus[0], NULL, NULL, isa_reserve_irq(14));
- ide_init2(&d->bus[1], NULL, NULL, isa_reserve_irq(15));
- return 0;
-}
-
-static int pci_piix3_ide_initfn(PCIDevice *dev)
-{
- PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
-
- d->type = IDE_TYPE_PIIX3;
- pci_config_set_vendor_id(d->dev.config, PCI_VENDOR_ID_INTEL);
- pci_config_set_device_id(d->dev.config, PCI_DEVICE_ID_INTEL_82371SB_1);
- return pci_piix_ide_initfn(d);
-}
-
-static int pci_piix4_ide_initfn(PCIDevice *dev)
-{
- PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
-
- d->type = IDE_TYPE_PIIX4;
- pci_config_set_vendor_id(d->dev.config, PCI_VENDOR_ID_INTEL);
- pci_config_set_device_id(d->dev.config, PCI_DEVICE_ID_INTEL_82371AB);
- return pci_piix_ide_initfn(d);
-}
-
-/* hd_table must contain 4 block drivers */
-/* NOTE: for the PIIX3, the IRQs and IOports are hardcoded */
-void pci_piix3_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
-{
- PCIDevice *dev;
-
- dev = pci_create_simple(bus, devfn, "PIIX3 IDE");
- pci_ide_create_devs(dev, hd_table);
-}
-
-/* hd_table must contain 4 block drivers */
-/* NOTE: for the PIIX4, the IRQs and IOports are hardcoded */
-void pci_piix4_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
-{
- PCIDevice *dev;
-
- dev = pci_create_simple(bus, devfn, "PIIX4 IDE");
- pci_ide_create_devs(dev, hd_table);
-}
-
-static PCIDeviceInfo piix_ide_info[] = {
- {
- .qdev.name = "PIIX3 IDE",
- .qdev.size = sizeof(PCIIDEState),
- .init = pci_piix3_ide_initfn,
- },{
- .qdev.name = "PIIX4 IDE",
- .qdev.size = sizeof(PCIIDEState),
- .init = pci_piix4_ide_initfn,
- },{
- .qdev.name = "CMD646 IDE",
- .qdev.size = sizeof(PCIIDEState),
- .init = pci_cmd646_ide_initfn,
- .qdev.props = (Property[]) {
- DEFINE_PROP_UINT32("secondary", PCIIDEState, secondary, 0),
- DEFINE_PROP_END_OF_LIST(),
- },
- },{
- /* end of list */
- }
-};
-
-static void piix_ide_register(void)
-{
- pci_qdev_register_many(piix_ide_info);
-}
-device_init(piix_ide_register);
diff --git a/hw/ide/piix.c b/hw/ide/piix.c
new file mode 100644
index 0000000..47d736d
--- /dev/null
+++ b/hw/ide/piix.c
@@ -0,0 +1,198 @@
+/*
+ * QEMU IDE Emulation: PCI PIIX3/4 support.
+ *
+ * Copyright (c) 2003 Fabrice Bellard
+ * Copyright (c) 2006 Openedhand Ltd.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#include <hw/hw.h>
+#include <hw/pc.h>
+#include <hw/pci.h>
+#include <hw/isa.h>
+#include "block.h"
+#include "block_int.h"
+#include "sysemu.h"
+#include "dma.h"
+
+#include <hw/ide/pci.h>
+
+static uint32_t bmdma_readb(void *opaque, uint32_t addr)
+{
+ BMDMAState *bm = opaque;
+ uint32_t val;
+
+ switch(addr & 3) {
+ case 0:
+ val = bm->cmd;
+ break;
+ case 2:
+ val = bm->status;
+ break;
+ default:
+ val = 0xff;
+ break;
+ }
+#ifdef DEBUG_IDE
+ printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
+#endif
+ return val;
+}
+
+static void bmdma_writeb(void *opaque, uint32_t addr, uint32_t val)
+{
+ BMDMAState *bm = opaque;
+#ifdef DEBUG_IDE
+ printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
+#endif
+ switch(addr & 3) {
+ case 2:
+ bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val &
0x06);
+ break;
+ }
+}
+
+static void bmdma_map(PCIDevice *pci_dev, int region_num,
+ uint32_t addr, uint32_t size, int type)
+{
+ PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, pci_dev);
+ int i;
+
+ for(i = 0;i < 2; i++) {
+ BMDMAState *bm = &d->bmdma[i];
+ d->bus[i].bmdma = bm;
+ bm->pci_dev = DO_UPCAST(PCIIDEState, dev, pci_dev);
+ bm->bus = d->bus+i;
+ qemu_add_vm_change_state_handler(ide_dma_restart_cb, bm);
+
+ register_ioport_write(addr, 1, 1, bmdma_cmd_writeb, bm);
+
+ register_ioport_write(addr + 1, 3, 1, bmdma_writeb, bm);
+ register_ioport_read(addr, 4, 1, bmdma_readb, bm);
+
+ register_ioport_write(addr + 4, 4, 1, bmdma_addr_writeb, bm);
+ register_ioport_read(addr + 4, 4, 1, bmdma_addr_readb, bm);
+ register_ioport_write(addr + 4, 4, 2, bmdma_addr_writew, bm);
+ register_ioport_read(addr + 4, 4, 2, bmdma_addr_readw, bm);
+ register_ioport_write(addr + 4, 4, 4, bmdma_addr_writel, bm);
+ register_ioport_read(addr + 4, 4, 4, bmdma_addr_readl, bm);
+ addr += 8;
+ }
+}
+
+static void piix3_reset(void *opaque)
+{
+ PCIIDEState *d = opaque;
+ uint8_t *pci_conf = d->dev.config;
+ int i;
+
+ for (i = 0; i < 2; i++)
+ ide_dma_cancel(&d->bmdma[i]);
+
+ pci_conf[0x04] = 0x00;
+ pci_conf[0x05] = 0x00;
+ pci_conf[0x06] = 0x80; /* FBC */
+ pci_conf[0x07] = 0x02; // PCI_status_devsel_medium
+ pci_conf[0x20] = 0x01; /* BMIBA: 20-23h */
+}
+
+static int pci_piix_ide_initfn(PCIIDEState *d)
+{
+ uint8_t *pci_conf = d->dev.config;
+
+ pci_conf[0x09] = 0x80; // legacy ATA mode
+ pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_IDE);
+ pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
+
+ qemu_register_reset(piix3_reset, d);
+ piix3_reset(d);
+
+ pci_register_bar(&d->dev, 4, 0x10, PCI_ADDRESS_SPACE_IO, bmdma_map);
+
+ register_savevm("ide", 0, 3, pci_ide_save, pci_ide_load, d);
+
+ ide_bus_new(&d->bus[0], &d->dev.qdev);
+ ide_bus_new(&d->bus[1], &d->dev.qdev);
+ ide_init_ioport(&d->bus[0], 0x1f0, 0x3f6);
+ ide_init_ioport(&d->bus[1], 0x170, 0x376);
+
+ ide_init2(&d->bus[0], NULL, NULL, isa_reserve_irq(14));
+ ide_init2(&d->bus[1], NULL, NULL, isa_reserve_irq(15));
+ return 0;
+}
+
+static int pci_piix3_ide_initfn(PCIDevice *dev)
+{
+ PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
+
+ d->type = IDE_TYPE_PIIX3;
+ pci_config_set_vendor_id(d->dev.config, PCI_VENDOR_ID_INTEL);
+ pci_config_set_device_id(d->dev.config, PCI_DEVICE_ID_INTEL_82371SB_1);
+ return pci_piix_ide_initfn(d);
+}
+
+static int pci_piix4_ide_initfn(PCIDevice *dev)
+{
+ PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
+
+ d->type = IDE_TYPE_PIIX4;
+ pci_config_set_vendor_id(d->dev.config, PCI_VENDOR_ID_INTEL);
+ pci_config_set_device_id(d->dev.config, PCI_DEVICE_ID_INTEL_82371AB);
+ return pci_piix_ide_initfn(d);
+}
+
+/* hd_table must contain 4 block drivers */
+/* NOTE: for the PIIX3, the IRQs and IOports are hardcoded */
+void pci_piix3_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
+{
+ PCIDevice *dev;
+
+ dev = pci_create_simple(bus, devfn, "PIIX3 IDE");
+ pci_ide_create_devs(dev, hd_table);
+}
+
+/* hd_table must contain 4 block drivers */
+/* NOTE: for the PIIX4, the IRQs and IOports are hardcoded */
+void pci_piix4_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
+{
+ PCIDevice *dev;
+
+ dev = pci_create_simple(bus, devfn, "PIIX4 IDE");
+ pci_ide_create_devs(dev, hd_table);
+}
+
+static PCIDeviceInfo piix_ide_info[] = {
+ {
+ .qdev.name = "PIIX3 IDE",
+ .qdev.size = sizeof(PCIIDEState),
+ .init = pci_piix3_ide_initfn,
+ },{
+ .qdev.name = "PIIX4 IDE",
+ .qdev.size = sizeof(PCIIDEState),
+ .init = pci_piix4_ide_initfn,
+ },{
+ /* end of list */
+ }
+};
+
+static void piix_ide_register(void)
+{
+ pci_qdev_register_many(piix_ide_info);
+}
+device_init(piix_ide_register);
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-commits] [COMMIT 4c3df0e] ide: split cmd646 and piix from pci.c,
Anthony Liguori <=