[Qemu-commits] [COMMIT c2cc47a] Support addr=... in option argument of -driveif=virtio

[Anthony Liguori]

From: Markus Armbruster <address@hidden>

Make drive_init() accept addr=, put the value into struct DriveInfo.
Use it in all the places that create virtio-blk-pci devices:
pc_init1(), bamboo_init(), mpc8544ds_init().

Don't support addr= in third argument of monitor command pci_add and
second argument of drive_add, because that clashes with their first
arguments.  Admittedly unelegant.

Signed-off-by: Markus Armbruster <address@hidden>
Signed-off-by: Anthony Liguori <address@hidden>

diff --git a/hw/pc.c b/hw/pc.c
index d5c8c3c..19021ea 100644
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -848,6 +848,7 @@ static void pc_init1(ram_addr_t ram_size,
     ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
     int bios_size, isa_bios_size, oprom_area_size;
     PCIBus *pci_bus;
+    PCIDevice *pci_dev;
     int piix3_devfn = -1;
     CPUState *env;
     qemu_irq *cpu_irq;
@@ -1161,7 +1162,9 @@ static void pc_init1(ram_addr_t ram_size,
         int unit_id = 0;
 
         while ((index = drive_get_index(IF_VIRTIO, 0, unit_id)) != -1) {
-            pci_create_simple(pci_bus, -1, "virtio-blk-pci");
+            pci_dev = pci_create("virtio-blk-pci",
+                                 drives_table[index].devaddr);
+            qdev_init(&pci_dev->qdev);
             unit_id++;
         }
     }
diff --git a/hw/pci-hotplug.c b/hw/pci-hotplug.c
index 031643e..952e27a 100644
--- a/hw/pci-hotplug.c
+++ b/hw/pci-hotplug.c
@@ -70,6 +70,10 @@ void drive_hot_add(Monitor *mon, const char *pci_addr, const 
char *opts)
     drive_idx = add_init_drive(opts);
     if (drive_idx < 0)
         return;
+    if (drives_table[drive_idx].devaddr) {
+        monitor_printf(mon, "Parameter addr not supported\n");
+        return;
+    }
     type = drives_table[drive_idx].type;
     bus = drive_get_max_bus (type);
 
@@ -116,6 +120,10 @@ static PCIDevice *qemu_pci_hot_add_storage(Monitor *mon,
         drive_idx = add_init_drive(opts);
         if (drive_idx < 0)
             return NULL;
+        if (drives_table[drive_idx].devaddr) {
+            monitor_printf(mon, "Parameter addr not supported\n");
+            return NULL;
+        }
     } else if (type == IF_VIRTIO) {
         monitor_printf(mon, "virtio requires a backing file/device.\n");
         return NULL;
diff --git a/hw/ppc440_bamboo.c b/hw/ppc440_bamboo.c
index f287ec7..d9ef3ec 100644
--- a/hw/ppc440_bamboo.c
+++ b/hw/ppc440_bamboo.c
@@ -90,6 +90,7 @@ static void bamboo_init(ram_addr_t ram_size,
 {
     unsigned int pci_irq_nrs[4] = { 28, 27, 26, 25 };
     PCIBus *pcibus;
+    PCIDevice *pci_dev;
     CPUState *env;
     uint64_t elf_entry;
     uint64_t elf_lowaddr;
@@ -110,7 +111,8 @@ static void bamboo_init(ram_addr_t ram_size,
 
         /* Add virtio block devices. */
         while ((i = drive_get_index(IF_VIRTIO, 0, unit_id)) != -1) {
-            pci_create_simple(pcibus, -1, "virtio-blk-pci");
+            pci_dev = pci_create("virtio-blk-pci", drives_table[i].devaddr);
+            qdev_init(&pci_dev->qdev);
             unit_id++;
         }
 
diff --git a/hw/ppce500_mpc8544ds.c b/hw/ppce500_mpc8544ds.c
index aff3ae2..c0e367d 100644
--- a/hw/ppce500_mpc8544ds.c
+++ b/hw/ppce500_mpc8544ds.c
@@ -157,6 +157,7 @@ static void mpc8544ds_init(ram_addr_t ram_size,
                          const char *cpu_model)
 {
     PCIBus *pci_bus;
+    PCIDevice *pci_dev;
     CPUState *env;
     uint64_t elf_entry;
     uint64_t elf_lowaddr;
@@ -219,7 +220,8 @@ static void mpc8544ds_init(ram_addr_t ram_size,
 
         /* Add virtio block devices. */
         while ((i = drive_get_index(IF_VIRTIO, 0, unit_id)) != -1) {
-            pci_create_simple(pci_bus, -1, "virtio-blk-pci");
+            pci_dev = pci_create("virtio-blk-pci", drives_table[i].devaddr);
+            qdev_init(&pci_dev->qdev);
             unit_id++;
         }
 
diff --git a/qemu-options.hx b/qemu-options.hx
index 895b248..fdeda10 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -92,6 +92,7 @@ DEF("drive", HAS_ARG, QEMU_OPTION_drive,
     "-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i]\n"
     "       [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off]\n"
     "       [,cache=writethrough|writeback|none][,format=f][,serial=s]\n"
+    "       [,addr=A]\n"
     "                use 'file' as a drive image\n")
 STEXI
 @item -drive @var{option}[,@var{option}[,@var{option}[,...]]]
@@ -126,6 +127,8 @@ the format.  Can be used to specifiy format=raw to avoid 
interpreting
 an untrusted format header.
 @item address@hidden
 This option specifies the serial number to assign to the device.
address@hidden address@hidden
+Specify the controller's PCI address (if=virtio only).
 @end table
 
 By default, writethrough caching is used for all block device.  This means that
diff --git a/sysemu.h b/sysemu.h
index 403b35e..d77de09 100644
--- a/sysemu.h
+++ b/sysemu.h
@@ -156,6 +156,7 @@ typedef enum {
 
 typedef struct DriveInfo {
     BlockDriverState *bdrv;
+    const char *devaddr;
     BlockInterfaceType type;
     int bus;
     int unit;
diff --git a/vl.c b/vl.c
index ca26450..7ef9748 100644
--- a/vl.c
+++ b/vl.c
@@ -2209,12 +2209,14 @@ int drive_init(struct drive_opt *arg, int snapshot, 
void *opaque)
     int index;
     int cache;
     int bdrv_flags, onerror;
+    const char *devaddr;
     int drives_table_idx;
     char *str = arg->opt;
     static const char * const params[] = { "bus", "unit", "if", "index",
                                            "cyls", "heads", "secs", "trans",
                                            "media", "snapshot", "file",
-                                           "cache", "format", "serial", 
"werror",
+                                           "cache", "format", "serial",
+                                           "werror", "addr",
                                            NULL };
 
     if (check_params(buf, sizeof(buf), params, str) < 0) {
@@ -2428,6 +2430,15 @@ int drive_init(struct drive_opt *arg, int snapshot, void 
*opaque)
         }
     }
 
+    devaddr = NULL;
+    if (get_param_value(buf, sizeof(buf), "addr", str)) {
+        if (type != IF_VIRTIO) {
+            fprintf(stderr, "addr is not supported by in '%s'\n", str);
+            return -1;
+        }
+        devaddr = strdup(buf);
+    }
+
     /* compute bus and unit according index */
 
     if (index != -1) {
@@ -2489,6 +2500,7 @@ int drive_init(struct drive_opt *arg, int snapshot, void 
*opaque)
     bdrv = bdrv_new(buf);
     drives_table_idx = drive_get_free_idx();
     drives_table[drives_table_idx].bdrv = bdrv;
+    drives_table[drives_table_idx].devaddr = devaddr;
     drives_table[drives_table_idx].type = type;
     drives_table[drives_table_idx].bus = bus_id;
     drives_table[drives_table_idx].unit = unit_id;