qemu-block
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PULL 12/23] hw/sd/pl181: Replace disabled fprintf()s by trace events


From: Philippe Mathieu-Daudé
Subject: [PULL 12/23] hw/sd/pl181: Replace disabled fprintf()s by trace events
Date: Fri, 21 Aug 2020 19:29:05 +0200

Convert disabled DPRINTF() to trace events and remove ifdef'ry.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200705204630.4133-9-f4bug@amsat.org>
---
 hw/sd/pl181.c      | 26 +++++++++-----------------
 hw/sd/trace-events | 10 ++++++++++
 2 files changed, 19 insertions(+), 17 deletions(-)

diff --git a/hw/sd/pl181.c b/hw/sd/pl181.c
index f69488ebac3..574500ce600 100644
--- a/hw/sd/pl181.c
+++ b/hw/sd/pl181.c
@@ -17,15 +17,7 @@
 #include "qemu/module.h"
 #include "qemu/error-report.h"
 #include "qapi/error.h"
-
-//#define DEBUG_PL181 1
-
-#ifdef DEBUG_PL181
-#define DPRINTF(fmt, ...) \
-do { printf("pl181: " fmt , ## __VA_ARGS__); } while (0)
-#else
-#define DPRINTF(fmt, ...) do {} while(0)
-#endif
+#include "trace.h"
 
 #define PL181_FIFO_LEN 16
 
@@ -158,7 +150,7 @@ static void pl181_fifo_push(PL181State *s, uint32_t value)
     n = (s->fifo_pos + s->fifo_len) & (PL181_FIFO_LEN - 1);
     s->fifo_len++;
     s->fifo[n] = value;
-    DPRINTF("FIFO push %08x\n", (int)value);
+    trace_pl181_fifo_push(value);
 }
 
 static uint32_t pl181_fifo_pop(PL181State *s)
@@ -172,7 +164,7 @@ static uint32_t pl181_fifo_pop(PL181State *s)
     value = s->fifo[s->fifo_pos];
     s->fifo_len--;
     s->fifo_pos = (s->fifo_pos + 1) & (PL181_FIFO_LEN - 1);
-    DPRINTF("FIFO pop %08x\n", (int)value);
+    trace_pl181_fifo_pop(value);
     return value;
 }
 
@@ -184,7 +176,7 @@ static void pl181_do_command(PL181State *s)
 
     request.cmd = s->cmd & PL181_CMD_INDEX;
     request.arg = s->cmdarg;
-    DPRINTF("Command %d %08x\n", request.cmd, request.arg);
+    trace_pl181_command_send(request.cmd, request.arg);
     rlen = sdbus_do_command(&s->sdbus, &request, response);
     if (rlen < 0)
         goto error;
@@ -201,16 +193,16 @@ static void pl181_do_command(PL181State *s)
             s->response[2] = ldl_be_p(&response[8]);
             s->response[3] = ldl_be_p(&response[12]) & ~1;
         }
-        DPRINTF("Response received\n");
+        trace_pl181_command_response_pending();
         s->status |= PL181_STATUS_CMDRESPEND;
     } else {
-        DPRINTF("Command sent\n");
+        trace_pl181_command_sent();
         s->status |= PL181_STATUS_CMDSENT;
     }
     return;
 
 error:
-    DPRINTF("Timeout\n");
+    trace_pl181_command_timeout();
     s->status |= PL181_STATUS_CMDTIMEOUT;
 }
 
@@ -262,11 +254,11 @@ static void pl181_fifo_run(PL181State *s)
         s->status |= PL181_STATUS_DATAEND;
         /* HACK: */
         s->status |= PL181_STATUS_DATABLOCKEND;
-        DPRINTF("Transfer Complete\n");
+        trace_pl181_fifo_transfer_complete();
     }
     if (s->datacnt == 0 && s->fifo_len == 0) {
         s->datactrl &= ~PL181_DATA_ENABLE;
-        DPRINTF("Data engine idle\n");
+        trace_pl181_data_engine_idle();
     } else {
         /* Update FIFO bits.  */
         bits = PL181_STATUS_TXACTIVE | PL181_STATUS_RXACTIVE;
diff --git a/hw/sd/trace-events b/hw/sd/trace-events
index 5f09d32eb2c..a87d7355fb8 100644
--- a/hw/sd/trace-events
+++ b/hw/sd/trace-events
@@ -62,3 +62,13 @@ milkymist_memcard_memory_write(uint32_t addr, uint32_t 
value) "addr 0x%08x value
 # pxa2xx_mmci.c
 pxa2xx_mmci_read(uint8_t size, uint32_t addr, uint32_t value) "size %d addr 
0x%02x value 0x%08x"
 pxa2xx_mmci_write(uint8_t size, uint32_t addr, uint32_t value) "size %d addr 
0x%02x value 0x%08x"
+
+# pl181.c
+pl181_command_send(uint8_t cmd, uint32_t arg) "sending CMD%02d arg 0x%08" 
PRIx32
+pl181_command_sent(void) "command sent"
+pl181_command_response_pending(void) "response received"
+pl181_command_timeout(void) "command timeouted"
+pl181_fifo_push(uint32_t data) "FIFO push 0x%08" PRIx32
+pl181_fifo_pop(uint32_t data) "FIFO pop 0x%08" PRIx32
+pl181_fifo_transfer_complete(void) "FIFO transfer complete"
+pl181_data_engine_idle(void) "data engine idle"
-- 
2.26.2




reply via email to

[Prev in Thread] Current Thread [Next in Thread]