[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v3 08/15] acpi: serial: don't use _STA method
From: |
Gerd Hoffmann |
Subject: |
Re: [PATCH v3 08/15] acpi: serial: don't use _STA method |
Date: |
Mon, 4 May 2020 15:19:55 +0200 |
> > -static Aml *build_com_device_aml(uint8_t uid)
> > +static void build_com_device_aml(Aml *scope, uint8_t uid)
> > {
> > Aml *dev;
> > Aml *crs;
> > - Aml *method;
> > - Aml *if_ctx;
> > - Aml *else_ctx;
> > - Aml *zero = aml_int(0);
> > - Aml *is_present = aml_local(0);
> > - const char *enabled_field = "CAEN";
> > uint8_t irq = 4;
> > uint16_t io_port = 0x03F8;
> > assert(uid == 1 || uid == 2);
> > if (uid == 2) {
> > - enabled_field = "CBEN";
> > irq = 3;
> > io_port = 0x02F8;
> > }
> > + if (!memory_region_present(get_system_io(), io_port)) {
> > + return;
> > + }
>
> The patch looks OK, but an you split this check into a separate (previous?)
> patch please?
I don't think this belongs to a separate patch. It is basically the
same check the lpc bridge is doing when filling the pci config space
(see hw/isa/lpc_ich9.c). So this effectively maintains the existing
logic, only that we now check directly instead of letting the guest
check the pci config space bit via _STA method.
Also note this is only temporary for bisecting, the next patch in the
series moves the code to a device callback so this kind of "device
exists" check is not needed any more.
take care,
Gerd
- Re: [PATCH v3 08/15] acpi: serial: don't use _STA method,
Gerd Hoffmann <=