Re: [RFC 0/5] accel/kvm: Support KVM PMU filter

[Mi, Dapeng]

On 7/10/2024 12:51 PM, Zhao Liu wrote:
> Hi QEMU maintainers, arm and PMU folks,
>
> I picked up Shaoqing's previous work [1] on the KVM PMU filter for arm,
> and now is trying to support this feature for x86 with a JSON-compatible
> API.
>
> While arm and x86 use different KVM ioctls to configure the PMU filter,
> considering they all have similar inputs (PMU event + action), it is
> still possible to abstract a generic, cross-architecture kvm-pmu-filter
> object and provide users with a sufficiently generic or near-consistent
> QAPI interface.
>
> That's what I did in this series, a new kvm-pmu-filter object, with the
> API like:
>
> -object 
> '{"qom-type":"kvm-pmu-filter","id":"f0","events":[{"action":"allow","format":"raw","code":"0xc4"}]}'

I'm not sure why the action is defined to event scope instead of the entire
filter scope. At least for x86 arch, the action is defined to filter scope
in KVM. Do other archs support event scope's action? If the action can be
defined to filter scope, the code could be simplified much.


>
> For i386, this object is inserted into kvm accelerator and is extended
> to support fixed-counter and more formats ("x86-default" and
> "x86-masked-entry"):
>
> -accel kvm,pmu-filter=f0 \
> -object 
> pmu='{"qom-type":"kvm-pmu-filter","id":"f0","x86-fixed-counter":{"action":"allow","bitmap":"0x0"},"events":[{"action":"allow","format":"x86-masked-entry","select":"0xc4","mask":"0xff","match":"0","exclude":true},{"action":"allow","format":"x86-masked-entry","select":"0xc5","mask":"0xff","match":"0","exclude":true}]}'
>
> This object can still be added as the property to the arch CPU if it is
> desired as a per CPU feature (as Shaoqin did for arm before).
>
> Welcome your feedback and comments!
>
>
> Introduction
> ============
>
>
> Formats supported in kvm-pmu-filter
> -----------------------------------
>
> This series supports 3 formats:
>
> * raw format (general format).
>
>   This format indicates the code that has been encoded to be able to
>   index the PMU events, and which can be delivered directly to the KVM
>   ioctl. For arm, this means the event code, and for i386, this means
>   the raw event with the layout like:
>
>       select high bit | umask | select low bits
>
> * x86-default format (i386 specific)
>
>   x86 commonly uses select&umask to identify PMU events, and this format
>   is used to support the select&umask. Then QEMU will encode select and
>   umask into a raw format code.
>
> * x86-masked-entry (i386 specific)
>
>   This is a special format that x86's KVM_SET_PMU_EVENT_FILTER supports.
>
>
> Hexadecimal value string
> ------------------------
>
> In practice, the values associated with PMU events (code for arm, select&
> umask for x86) are often expressed in hexadecimal. Further, from linux
> perf related information (tools/perf/pmu-events/arch/*/*/*.json), x86/
> arm64/riscv/nds32/powerpc all prefer the hexadecimal numbers and only
> s390 uses decimal value.
>
> Therefore, it is necessary to support hexadecimal in order to honor PMU
> conventions.
>
> However, unfortunately, standard JSON (RFC 8259) does not support
> hexadecimal numbers. So I can only consider using the numeric string in
> the QAPI and then parsing it to a number.
>
> To achieve this, I defined two versions of PMU-related structures in
> kvm.json:
>  * a native version that accepts numeric values, which is used for
>    QEMU's internal code processing,
>
>  * and a variant version that accepts numeric string, which is used to
>    receive user input.
>
> kvm-pmu-filter object will take care of converting the string version
> of the event/counter information into the numeric version.
>
> The related implementation can be found in patch 1.
>
>
> CPU property v.s. KVM property
> ------------------------------
>
> In Shaoqin's previous implementation [1], KVM PMU filter is made as a
> arm CPU property. This is because arm uses a per CPU ioctl
> (KVM_SET_DEVICE_ATTR) to configure KVM PMU filter.
>
> However, for x86, the dependent ioctl (KVM_SET_PMU_EVENT_FILTER) is per
> VM. In the meantime, considering that for hybrid architecture, maybe in
> the future there will be a new per vCPU ioctl, or there will be
> practices to support filter fixed counter by configuring CPUIDs.
>
> Based on the above thoughts, for x86, it is not appropriate to make the
> current per-VM ioctl-based PMU filter a CPU property. Instead, I make it
> a kvm property and configure it via "-accel kvm,pmu-filter=obj_id".
>
> So in summary, it is feasible to use the KVM PMU filter as either a CPU
> or a KVM property, depending on whether it is used as a CPU feature or a
> VM feature.
>
> The kvm-pmu-filter object, as an abstraction, is general enough to
> support filter configurations for different scopes (per-CPU or per-VM).

Per my understanding, the cpus sharing same uarch should share same perf
events filter. Not sure if there is real requirement to support different
filters on the CPUs with same arch.


>
>
> [1]: 
> https://lore.kernel.org/qemu-devel/20240409024940.180107-1-shahuang@redhat.com/
>
> Thanks and Best Regards,
> Zhao
> ---
> Zhao Liu (5):
>   qapi/qom: Introduce kvm-pmu-filter object
>   i386/kvm: Support initial KVM PMU filter
>   i386/kvm: Support event with select&umask format in KVM PMU filter
>   i386/kvm: Support event with masked entry format in KVM PMU filter
>   i386/kvm: Support fixed counter in KVM PMU filter
>
>  MAINTAINERS                |   1 +
>  accel/kvm/kvm-pmu.c        | 367 +++++++++++++++++++++++++++++++++++++
>  accel/kvm/meson.build      |   1 +
>  include/sysemu/kvm-pmu.h   |  43 +++++
>  include/sysemu/kvm_int.h   |   2 +
>  qapi/kvm.json              | 255 ++++++++++++++++++++++++++
>  qapi/meson.build           |   1 +
>  qapi/qapi-schema.json      |   1 +
>  qapi/qom.json              |   3 +
>  target/i386/kvm/kvm.c      | 211 +++++++++++++++++++++
>  target/i386/kvm/kvm_i386.h |   1 +
>  11 files changed, 886 insertions(+)
>  create mode 100644 accel/kvm/kvm-pmu.c
>  create mode 100644 include/sysemu/kvm-pmu.h
>  create mode 100644 qapi/kvm.json
>