[PATCH v2 00/12] Introduce new vmapple machine type

[Alexander Graf]

This patch set introduces a new ARM and HVF specific machine type
called "vmapple". It mimicks the device model that Apple's proprietary
Virtualization.Framework exposes, but implements it in QEMU.

With this new machine type, you can run macOS guests on Apple Silicon
systems via HVF. To do so, you need to first install macOS using
Virtualization.Framework onto a virtual disk image using a tool like
macosvm (https://github.com/s-u/macosvm)

  $ macosvm --disk disk.img,size=32g --aux aux.img \
            --restore UniversalMac_12.0.1_21A559_Restore.ipsw vm.json

Then, extract the ECID from the installed VM:

  $ cat "$DIR/macosvm.json" | python3 -c                                 \
  'import json,sys;obj=json.load(sys.stdin);print(obj["machineId"]) |    \
  base64 -d | plutil -extract ECID raw -

In addition, cut off the first 16kb of the aux.img:

  $ dd if=aux.img of=aux.img.trimmed bs=$(( 0x4000 )) skip=1

Now, you can just launch QEMU with the bits generated above:

  $ qemu-system-aarch64 -serial mon:stdio                                \
  -m 4G                                                                  \
  -M vmapple,uuid=6240349656165161789                                    \
  -bios /Sys*/Lib*/Fra*/Virtualization.f*/R*/AVPBooter.vmapple2.bin      \
  -pflash aux.img.trimmed                                                \
  -pflash disk.img                                                       \
  -drive file=disk.img,if=none,id=root                                   \
  -device vmapple-virtio-root,drive=root                                 \
  -drive file=aux.img.trimmed,if=none,id=aux                             \
  -device vmapple-virtio-aix,drive=aux                                   \
  -accel hvf

There are a few limitations with this implementation:

  - Only runs on macOS because it relies on
    ParavirtualizesGraphics.Framework
  - Something is not fully correct on interrupt delivery or
    similar - the keyboard does not work
  - No Rosetta in the guest because we lack the private
    entitlement to enable TSO

Over time, I hope that some of the limitations above could cease to exist.
This device model would enable very nice use cases with KVM on an Asahi
Linux device.

Please beware that the vmapple device model only works with macOS 12 guests
for now. Newer guests run into Hypervisor.Framework incompatibilities.

---

v1 -> v2:

  - Adapt to system_ss meson.build target
  - Add documentation
  - Rework virtio-blk patch to make all vmapple virtio-blk logic subclasses
  - Add log message on write
  - Move max slot number to define
  - Use SPDX header
  - Remove useless includes

Alexander Graf (12):
  build: Only define OS_OBJECT_USE_OBJC with gcc
  hw/misc/pvpanic: Add MMIO interface
  hvf: Increase number of possible memory slots
  hvf: arm: Ignore writes to CNTP_CTL_EL0
  hw: Add vmapple subdir
  gpex: Allow more than 4 legacy IRQs
  hw/vmapple/aes: Introduce aes engine
  hw/vmapple/bdif: Introduce vmapple backdoor interface
  hw/vmapple/cfg: Introduce vmapple cfg region
  hw/vmapple/apple-gfx: Introduce ParavirtualizedGraphics.Framework
    support
  hw/vmapple/virtio-blk: Add support for apple virtio-blk
  hw/vmapple/vmapple: Add vmapple machine type

 MAINTAINERS                     |   7 +
 docs/system/arm/vmapple.rst     |  68 ++++
 docs/system/target-arm.rst      |   1 +
 meson.build                     |   9 +-
 hw/vmapple/trace.h              |   1 +
 include/hw/misc/pvpanic.h       |   1 +
 include/hw/pci-host/gpex.h      |   7 +-
 include/hw/pci/pci_ids.h        |   1 +
 include/hw/virtio/virtio-blk.h  |  11 +-
 include/hw/vmapple/bdif.h       |  31 ++
 include/hw/vmapple/cfg.h        |  68 ++++
 include/hw/vmapple/virtio-blk.h |  39 ++
 include/sysemu/hvf_int.h        |   4 +-
 accel/hvf/hvf-accel-ops.c       |   2 +-
 hw/arm/sbsa-ref.c               |   2 +-
 hw/arm/virt.c                   |   2 +-
 hw/block/virtio-blk.c           |  18 +-
 hw/i386/microvm.c               |   2 +-
 hw/loongarch/virt.c             |   2 +-
 hw/mips/loongson3_virt.c        |   2 +-
 hw/misc/pvpanic-mmio.c          |  61 +++
 hw/openrisc/virt.c              |  12 +-
 hw/pci-host/gpex.c              |  36 +-
 hw/riscv/virt.c                 |  12 +-
 hw/vmapple/aes.c                | 583 ++++++++++++++++++++++++++++
 hw/vmapple/bdif.c               | 245 ++++++++++++
 hw/vmapple/cfg.c                | 105 +++++
 hw/vmapple/virtio-blk.c         | 212 ++++++++++
 hw/vmapple/vmapple.c            | 661 ++++++++++++++++++++++++++++++++
 hw/xtensa/virt.c                |   2 +-
 target/arm/hvf/hvf.c            |   9 +
 hw/Kconfig                      |   1 +
 hw/meson.build                  |   1 +
 hw/misc/Kconfig                 |   4 +
 hw/misc/meson.build             |   1 +
 hw/vmapple/Kconfig              |  33 ++
 hw/vmapple/apple-gfx.m          | 578 ++++++++++++++++++++++++++++
 hw/vmapple/meson.build          |   6 +
 hw/vmapple/trace-events         |  47 +++
 39 files changed, 2852 insertions(+), 35 deletions(-)
 create mode 100644 docs/system/arm/vmapple.rst
 create mode 100644 hw/vmapple/trace.h
 create mode 100644 include/hw/vmapple/bdif.h
 create mode 100644 include/hw/vmapple/cfg.h
 create mode 100644 include/hw/vmapple/virtio-blk.h
 create mode 100644 hw/misc/pvpanic-mmio.c
 create mode 100644 hw/vmapple/aes.c
 create mode 100644 hw/vmapple/bdif.c
 create mode 100644 hw/vmapple/cfg.c
 create mode 100644 hw/vmapple/virtio-blk.c
 create mode 100644 hw/vmapple/vmapple.c
 create mode 100644 hw/vmapple/Kconfig
 create mode 100644 hw/vmapple/apple-gfx.m
 create mode 100644 hw/vmapple/meson.build
 create mode 100644 hw/vmapple/trace-events

-- 
2.39.2 (Apple Git-143)




Amazon Development Center Germany GmbH
Krausenstr. 38
10117 Berlin
Geschaeftsfuehrung: Christian Schlaeger, Jonathan Weiss
Eingetragen am Amtsgericht Charlottenburg unter HRB 149173 B
Sitz: Berlin
Ust-ID: DE 289 237 879