qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v2 2/4] hw/i2c/aspeed: Fix Tx count and Rx size error


From: Hang Yu
Subject: [PATCH v2 2/4] hw/i2c/aspeed: Fix Tx count and Rx size error
Date: Fri, 11 Aug 2023 13:42:17 +0800

According to the ast2600 datasheet,the actual Tx count is
Transmit Data Byte Count plus 1, and the max Rx size is
Receive Pool Buffer Size plus 1, both in Pool Buffer Control Register.
The version before forgot to plus 1, and mistake Rx count for Rx size.

Signed-off-by: Hang Yu <francis_yuu@stu.pku.edu.cn>
---
 hw/i2c/aspeed_i2c.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c
index 1f071a3811..e485d8bfb8 100644
--- a/hw/i2c/aspeed_i2c.c
+++ b/hw/i2c/aspeed_i2c.c
@@ -236,7 +236,7 @@ static int aspeed_i2c_bus_send(AspeedI2CBus *bus, uint8_t 
pool_start)
     uint32_t reg_byte_buf = aspeed_i2c_bus_byte_buf_offset(bus);
     uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
     int pool_tx_count = SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl,
-                                                TX_COUNT);
+                                                TX_COUNT) + 1;
 
     if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN)) {
         for (i = pool_start; i < pool_tx_count; i++) {
@@ -293,7 +293,7 @@ static void aspeed_i2c_bus_recv(AspeedI2CBus *bus)
     uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
     uint32_t reg_dma_addr = aspeed_i2c_bus_dma_addr_offset(bus);
     int pool_rx_count = SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl,
-                                                RX_COUNT);
+                                                RX_SIZE) + 1;
 
     if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_BUFF_EN)) {
         uint8_t *pool_base = aic->bus_pool_base(bus);
@@ -418,7 +418,7 @@ static void aspeed_i2c_bus_cmd_dump(AspeedI2CBus *bus)
     uint32_t reg_intr_sts = aspeed_i2c_bus_intr_sts_offset(bus);
     uint32_t reg_dma_len = aspeed_i2c_bus_dma_len_offset(bus);
     if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_BUFF_EN)) {
-        count = SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl, TX_COUNT);
+        count = SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl, TX_COUNT) + 
1;
     } else if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, RX_DMA_EN)) {
         count = bus->regs[reg_dma_len];
     } else { /* BYTE mode */
@@ -490,7 +490,7 @@ static void aspeed_i2c_bus_handle_cmd(AspeedI2CBus *bus, 
uint64_t value)
          */
         if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_cmd, TX_BUFF_EN)) {
             if (SHARED_ARRAY_FIELD_EX32(bus->regs, reg_pool_ctrl, TX_COUNT)
-                == 1) {
+                == 0) {
                 SHARED_ARRAY_FIELD_DP32(bus->regs, reg_cmd, M_TX_CMD, 0);
             } else {
                 /*
-- 
2.39.2 (Apple Git-143)




reply via email to

[Prev in Thread] Current Thread [Next in Thread]