[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v2] Use named constants in BCM props
|
From: |
Sergey Kambalin |
|
Subject: |
[PATCH v2] Use named constants in BCM props |
|
Date: |
Mon, 12 Jun 2023 14:59:50 +0300 |
ping
- PI_FIRMWARE_*_RATE constsnts were moved to raspberrypi-fw-defs.h
(seems more suitable place for them)
- inclusion of "qemu/osdep.h" has been removed
- year in copyright header has been updated
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/misc/bcm2835_property.c | 120 ++++++++++---------
include/hw/arm/raspi_platform.h | 6 +
include/hw/misc/raspberrypi-fw-defs.h | 163 ++++++++++++++++++++++++++
3 files changed, 236 insertions(+), 53 deletions(-)
create mode 100644 include/hw/misc/raspberrypi-fw-defs.h
diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
index 251b3d865d..871f71fdcd 100644
--- a/hw/misc/bcm2835_property.c
+++ b/hw/misc/bcm2835_property.c
@@ -12,10 +12,12 @@
#include "migration/vmstate.h"
#include "hw/irq.h"
#include "hw/misc/bcm2835_mbox_defs.h"
+#include "hw/misc/raspberrypi-fw-defs.h"
#include "sysemu/dma.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "trace.h"
+#include "hw/arm/raspi_platform.h"
/* https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface */
@@ -51,48 +53,48 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState
*s, uint32_t value)
/* @(value + 8) : Request/response indicator */
resplen = 0;
switch (tag) {
- case 0x00000000: /* End tag */
+ case RPI_FWREQ_PROPERTY_END: /* End tag */
break;
- case 0x00000001: /* Get firmware revision */
+ case RPI_FWREQ_GET_FIRMWARE_REVISION: /* Get firmware revision */
stl_le_phys(&s->dma_as, value + 12, 346337);
resplen = 4;
break;
- case 0x00010001: /* Get board model */
+ case RPI_FWREQ_GET_BOARD_MODEL: /* Get board model */
qemu_log_mask(LOG_UNIMP,
"bcm2835_property: 0x%08x get board model NYI\n",
tag);
resplen = 4;
break;
- case 0x00010002: /* Get board revision */
+ case RPI_FWREQ_GET_BOARD_REVISION: /* Get board revision */
stl_le_phys(&s->dma_as, value + 12, s->board_rev);
resplen = 4;
break;
- case 0x00010003: /* Get board MAC address */
+ case RPI_FWREQ_GET_BOARD_MAC_ADDRESS: /* Get board MAC address */
resplen = sizeof(s->macaddr.a);
dma_memory_write(&s->dma_as, value + 12, s->macaddr.a, resplen,
MEMTXATTRS_UNSPECIFIED);
break;
- case 0x00010004: /* Get board serial */
+ case RPI_FWREQ_GET_BOARD_SERIAL: /* Get board serial */
qemu_log_mask(LOG_UNIMP,
"bcm2835_property: 0x%08x get board serial NYI\n",
tag);
resplen = 8;
break;
- case 0x00010005: /* Get ARM memory */
+ case RPI_FWREQ_GET_ARM_MEMORY: /* Get ARM memory */
/* base */
stl_le_phys(&s->dma_as, value + 12, 0);
/* size */
stl_le_phys(&s->dma_as, value + 16, s->fbdev->vcram_base);
resplen = 8;
break;
- case 0x00010006: /* Get VC memory */
+ case RPI_FWREQ_GET_VC_MEMORY: /* Get VC memory */
/* base */
stl_le_phys(&s->dma_as, value + 12, s->fbdev->vcram_base);
/* size */
stl_le_phys(&s->dma_as, value + 16, s->fbdev->vcram_size);
resplen = 8;
break;
- case 0x00028001: /* Set power state */
+ case RPI_FWREQ_SET_POWER_STATE: /* Set power state */
/* Assume that whatever device they asked for exists,
* and we'll just claim we set it to the desired state
*/
@@ -103,38 +105,42 @@ static void
bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
/* Clocks */
- case 0x00030001: /* Get clock state */
+ case RPI_FWREQ_GET_CLOCK_STATE: /* Get clock state */
stl_le_phys(&s->dma_as, value + 16, 0x1);
resplen = 8;
break;
- case 0x00038001: /* Set clock state */
+ case RPI_FWREQ_SET_CLOCK_STATE: /* Set clock state */
qemu_log_mask(LOG_UNIMP,
"bcm2835_property: 0x%08x set clock state NYI\n",
tag);
resplen = 8;
break;
- case 0x00030002: /* Get clock rate */
- case 0x00030004: /* Get max clock rate */
- case 0x00030007: /* Get min clock rate */
+ case RPI_FWREQ_GET_CLOCK_RATE: /* Get clock rate */
+ case RPI_FWREQ_GET_MAX_CLOCK_RATE: /* Get max clock rate */
+ case RPI_FWREQ_GET_MIN_CLOCK_RATE: /* Get min clock rate */
switch (ldl_le_phys(&s->dma_as, value + 12)) {
- case 1: /* EMMC */
- stl_le_phys(&s->dma_as, value + 16, 50000000);
+ case RPI_FIRMWARE_EMMC_CLK_ID: /* EMMC */
+ stl_le_phys(&s->dma_as, value + 16,
RPI_FIRMWARE_EMMC_CLK_RATE);
break;
- case 2: /* UART */
- stl_le_phys(&s->dma_as, value + 16, 3000000);
+ case RPI_FIRMWARE_UART_CLK_ID: /* UART */
+ stl_le_phys(&s->dma_as, value + 16,
RPI_FIRMWARE_UART_CLK_RATE);
+ break;
+ case RPI_FIRMWARE_CORE_CLK_ID: /* Core Clock */
+ stl_le_phys(&s->dma_as, value + 16,
RPI_FIRMWARE_CORE_CLK_RATE);
break;
default:
- stl_le_phys(&s->dma_as, value + 16, 700000000);
+ stl_le_phys(&s->dma_as, value + 16,
+ RPI_FIRMWARE_DEFAULT_CLK_RATE);
break;
}
resplen = 8;
break;
- case 0x00038002: /* Set clock rate */
- case 0x00038004: /* Set max clock rate */
- case 0x00038007: /* Set min clock rate */
+ case RPI_FWREQ_SET_CLOCK_RATE: /* Set clock rate */
+ case RPI_FWREQ_SET_MAX_CLOCK_RATE: /* Set max clock rate */
+ case RPI_FWREQ_SET_MIN_CLOCK_RATE: /* Set min clock rate */
qemu_log_mask(LOG_UNIMP,
"bcm2835_property: 0x%08x set clock rate NYI\n",
tag);
@@ -143,121 +149,128 @@ static void
bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
/* Temperature */
- case 0x00030006: /* Get temperature */
+ case RPI_FWREQ_GET_TEMPERATURE: /* Get temperature */
stl_le_phys(&s->dma_as, value + 16, 25000);
resplen = 8;
break;
- case 0x0003000A: /* Get max temperature */
+ case RPI_FWREQ_GET_MAX_TEMPERATURE: /* Get max temperature */
stl_le_phys(&s->dma_as, value + 16, 99000);
resplen = 8;
break;
/* Frame buffer */
- case 0x00040001: /* Allocate buffer */
+ case RPI_FWREQ_FRAMEBUFFER_ALLOCATE: /* Allocate buffer */
stl_le_phys(&s->dma_as, value + 12, fbconfig.base);
stl_le_phys(&s->dma_as, value + 16,
bcm2835_fb_get_size(&fbconfig));
resplen = 8;
break;
- case 0x00048001: /* Release buffer */
+ case RPI_FWREQ_FRAMEBUFFER_RELEASE: /* Release buffer */
resplen = 0;
break;
- case 0x00040002: /* Blank screen */
+ case RPI_FWREQ_FRAMEBUFFER_BLANK: /* Blank screen */
resplen = 4;
break;
- case 0x00044003: /* Test physical display width/height */
- case 0x00044004: /* Test virtual display width/height */
+ /* Test physical display width/height */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT:
+ /* Test virtual display width/height */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT:
resplen = 8;
break;
- case 0x00048003: /* Set physical display width/height */
+ /* Set physical display width/height */
+ case RPI_FWREQ_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT:
fbconfig.xres = ldl_le_phys(&s->dma_as, value + 12);
fbconfig.yres = ldl_le_phys(&s->dma_as, value + 16);
bcm2835_fb_validate_config(&fbconfig);
fbconfig_updated = true;
/* fall through */
- case 0x00040003: /* Get physical display width/height */
+ /* Get physical display width/height */
+ case RPI_FWREQ_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT:
stl_le_phys(&s->dma_as, value + 12, fbconfig.xres);
stl_le_phys(&s->dma_as, value + 16, fbconfig.yres);
resplen = 8;
break;
- case 0x00048004: /* Set virtual display width/height */
+ /* Set virtual display width/height */
+ case RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT:
fbconfig.xres_virtual = ldl_le_phys(&s->dma_as, value + 12);
fbconfig.yres_virtual = ldl_le_phys(&s->dma_as, value + 16);
bcm2835_fb_validate_config(&fbconfig);
fbconfig_updated = true;
/* fall through */
- case 0x00040004: /* Get virtual display width/height */
+ /* Get virtual display width/height */
+ case RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_WIDTH_HEIGHT:
stl_le_phys(&s->dma_as, value + 12, fbconfig.xres_virtual);
stl_le_phys(&s->dma_as, value + 16, fbconfig.yres_virtual);
resplen = 8;
break;
- case 0x00044005: /* Test depth */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_DEPTH: /* Test depth */
resplen = 4;
break;
- case 0x00048005: /* Set depth */
+ case RPI_FWREQ_FRAMEBUFFER_SET_DEPTH: /* Set depth */
fbconfig.bpp = ldl_le_phys(&s->dma_as, value + 12);
bcm2835_fb_validate_config(&fbconfig);
fbconfig_updated = true;
/* fall through */
- case 0x00040005: /* Get depth */
+ case RPI_FWREQ_FRAMEBUFFER_GET_DEPTH: /* Get depth */
stl_le_phys(&s->dma_as, value + 12, fbconfig.bpp);
resplen = 4;
break;
- case 0x00044006: /* Test pixel order */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_PIXEL_ORDER: /* Test pixel order */
resplen = 4;
break;
- case 0x00048006: /* Set pixel order */
+ case RPI_FWREQ_FRAMEBUFFER_SET_PIXEL_ORDER: /* Set pixel order */
fbconfig.pixo = ldl_le_phys(&s->dma_as, value + 12);
bcm2835_fb_validate_config(&fbconfig);
fbconfig_updated = true;
/* fall through */
- case 0x00040006: /* Get pixel order */
+ case RPI_FWREQ_FRAMEBUFFER_GET_PIXEL_ORDER: /* Get pixel order */
stl_le_phys(&s->dma_as, value + 12, fbconfig.pixo);
resplen = 4;
break;
- case 0x00044007: /* Test pixel alpha */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_ALPHA_MODE: /* Test pixel alpha */
resplen = 4;
break;
- case 0x00048007: /* Set alpha */
+ case RPI_FWREQ_FRAMEBUFFER_SET_ALPHA_MODE: /* Set alpha */
fbconfig.alpha = ldl_le_phys(&s->dma_as, value + 12);
bcm2835_fb_validate_config(&fbconfig);
fbconfig_updated = true;
/* fall through */
- case 0x00040007: /* Get alpha */
+ case RPI_FWREQ_FRAMEBUFFER_GET_ALPHA_MODE: /* Get alpha */
stl_le_phys(&s->dma_as, value + 12, fbconfig.alpha);
resplen = 4;
break;
- case 0x00040008: /* Get pitch */
+ case RPI_FWREQ_FRAMEBUFFER_GET_PITCH: /* Get pitch */
stl_le_phys(&s->dma_as, value + 12,
bcm2835_fb_get_pitch(&fbconfig));
resplen = 4;
break;
- case 0x00044009: /* Test virtual offset */
+ /* Test virtual offset */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_OFFSET:
resplen = 8;
break;
- case 0x00048009: /* Set virtual offset */
+ case RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_OFFSET: /* Set virtual offset */
fbconfig.xoffset = ldl_le_phys(&s->dma_as, value + 12);
fbconfig.yoffset = ldl_le_phys(&s->dma_as, value + 16);
bcm2835_fb_validate_config(&fbconfig);
fbconfig_updated = true;
/* fall through */
- case 0x00040009: /* Get virtual offset */
+ case RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_OFFSET: /* Get virtual offset */
stl_le_phys(&s->dma_as, value + 12, fbconfig.xoffset);
stl_le_phys(&s->dma_as, value + 16, fbconfig.yoffset);
resplen = 8;
break;
- case 0x0004000a: /* Get/Test/Set overscan */
- case 0x0004400a:
- case 0x0004800a:
+ case RPI_FWREQ_FRAMEBUFFER_GET_OVERSCAN: /* Get/Test/Set overscan */
+ case RPI_FWREQ_FRAMEBUFFER_TEST_OVERSCAN:
+ case RPI_FWREQ_FRAMEBUFFER_SET_OVERSCAN:
stl_le_phys(&s->dma_as, value + 12, 0);
stl_le_phys(&s->dma_as, value + 16, 0);
stl_le_phys(&s->dma_as, value + 20, 0);
stl_le_phys(&s->dma_as, value + 24, 0);
resplen = 16;
break;
- case 0x0004800b: /* Set palette */
+ case RPI_FWREQ_FRAMEBUFFER_SET_PALETTE: /* Set palette */
offset = ldl_le_phys(&s->dma_as, value + 12);
length = ldl_le_phys(&s->dma_as, value + 16);
n = 0;
@@ -270,18 +283,19 @@ static void
bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
stl_le_phys(&s->dma_as, value + 12, 0);
resplen = 4;
break;
- case 0x00040013: /* Get number of displays */
+ /* Get number of displays */
+ case RPI_FWREQ_FRAMEBUFFER_GET_NUM_DISPLAYS:
stl_le_phys(&s->dma_as, value + 12, 1);
resplen = 4;
break;
- case 0x00060001: /* Get DMA channels */
+ case RPI_FWREQ_GET_DMA_CHANNELS: /* Get DMA channels */
/* channels 2-5 */
stl_le_phys(&s->dma_as, value + 12, 0x003C);
resplen = 4;
break;
- case 0x00050001: /* Get command line */
+ case RPI_FWREQ_GET_COMMAND_LINE: /* Get command line */
/*
* We follow the firmware behaviour: no NUL terminator is
* written to the buffer, and if the buffer is too short
diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h
index 4a56dd4b89..92a317950a 100644
--- a/include/hw/arm/raspi_platform.h
+++ b/include/hw/arm/raspi_platform.h
@@ -170,4 +170,10 @@
#define INTERRUPT_ILLEGAL_TYPE0 6
#define INTERRUPT_ILLEGAL_TYPE1 7
+/* Clock rates */
+#define RPI_FIRMWARE_EMMC_CLK_RATE 50000000
+#define RPI_FIRMWARE_UART_CLK_RATE 3000000
+#define RPI_FIRMWARE_CORE_CLK_RATE 350000000
+#define RPI_FIRMWARE_DEFAULT_CLK_RATE 700000000
+
#endif
diff --git a/include/hw/misc/raspberrypi-fw-defs.h
b/include/hw/misc/raspberrypi-fw-defs.h
new file mode 100644
index 0000000000..4551fe7450
--- /dev/null
+++ b/include/hw/misc/raspberrypi-fw-defs.h
@@ -0,0 +1,163 @@
+/*
+ * Raspberry Pi firmware definitions
+ *
+ * Copyright (C) 2022 Auriga LLC, based on Linux kernel
+ * `include/soc/bcm2835/raspberrypi-firmware.h` (Copyright © 2015 Broadcom)
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_
+#define INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_
+
+#include "qemu/osdep.h"
+
+enum rpi_firmware_property_tag {
+ RPI_FWREQ_PROPERTY_END = 0,
+ RPI_FWREQ_GET_FIRMWARE_REVISION = 0x00000001,
+ RPI_FWREQ_GET_FIRMWARE_VARIANT = 0x00000002,
+ RPI_FWREQ_GET_FIRMWARE_HASH = 0x00000003,
+
+ RPI_FWREQ_SET_CURSOR_INFO = 0x00008010,
+ RPI_FWREQ_SET_CURSOR_STATE = 0x00008011,
+
+ RPI_FWREQ_GET_BOARD_MODEL = 0x00010001,
+ RPI_FWREQ_GET_BOARD_REVISION = 0x00010002,
+ RPI_FWREQ_GET_BOARD_MAC_ADDRESS = 0x00010003,
+ RPI_FWREQ_GET_BOARD_SERIAL = 0x00010004,
+ RPI_FWREQ_GET_ARM_MEMORY = 0x00010005,
+ RPI_FWREQ_GET_VC_MEMORY = 0x00010006,
+ RPI_FWREQ_GET_CLOCKS = 0x00010007,
+ RPI_FWREQ_GET_POWER_STATE = 0x00020001,
+ RPI_FWREQ_GET_TIMING = 0x00020002,
+ RPI_FWREQ_SET_POWER_STATE = 0x00028001,
+ RPI_FWREQ_GET_CLOCK_STATE = 0x00030001,
+ RPI_FWREQ_GET_CLOCK_RATE = 0x00030002,
+ RPI_FWREQ_GET_VOLTAGE = 0x00030003,
+ RPI_FWREQ_GET_MAX_CLOCK_RATE = 0x00030004,
+ RPI_FWREQ_GET_MAX_VOLTAGE = 0x00030005,
+ RPI_FWREQ_GET_TEMPERATURE = 0x00030006,
+ RPI_FWREQ_GET_MIN_CLOCK_RATE = 0x00030007,
+ RPI_FWREQ_GET_MIN_VOLTAGE = 0x00030008,
+ RPI_FWREQ_GET_TURBO = 0x00030009,
+ RPI_FWREQ_GET_MAX_TEMPERATURE = 0x0003000a,
+ RPI_FWREQ_GET_STC = 0x0003000b,
+ RPI_FWREQ_ALLOCATE_MEMORY = 0x0003000c,
+ RPI_FWREQ_LOCK_MEMORY = 0x0003000d,
+ RPI_FWREQ_UNLOCK_MEMORY = 0x0003000e,
+ RPI_FWREQ_RELEASE_MEMORY = 0x0003000f,
+ RPI_FWREQ_EXECUTE_CODE = 0x00030010,
+ RPI_FWREQ_EXECUTE_QPU = 0x00030011,
+ RPI_FWREQ_SET_ENABLE_QPU = 0x00030012,
+ RPI_FWREQ_GET_DISPMANX_RESOURCE_MEM_HANDLE = 0x00030014,
+ RPI_FWREQ_GET_EDID_BLOCK = 0x00030020,
+ RPI_FWREQ_GET_CUSTOMER_OTP = 0x00030021,
+ RPI_FWREQ_GET_EDID_BLOCK_DISPLAY = 0x00030023,
+ RPI_FWREQ_GET_DOMAIN_STATE = 0x00030030,
+ RPI_FWREQ_GET_THROTTLED = 0x00030046,
+ RPI_FWREQ_GET_CLOCK_MEASURED = 0x00030047,
+ RPI_FWREQ_NOTIFY_REBOOT = 0x00030048,
+ RPI_FWREQ_SET_CLOCK_STATE = 0x00038001,
+ RPI_FWREQ_SET_CLOCK_RATE = 0x00038002,
+ RPI_FWREQ_SET_VOLTAGE = 0x00038003,
+ RPI_FWREQ_SET_MAX_CLOCK_RATE = 0x00038004,
+ RPI_FWREQ_SET_MIN_CLOCK_RATE = 0x00038007,
+ RPI_FWREQ_SET_TURBO = 0x00038009,
+ RPI_FWREQ_SET_CUSTOMER_OTP = 0x00038021,
+ RPI_FWREQ_SET_DOMAIN_STATE = 0x00038030,
+ RPI_FWREQ_GET_GPIO_STATE = 0x00030041,
+ RPI_FWREQ_SET_GPIO_STATE = 0x00038041,
+ RPI_FWREQ_SET_SDHOST_CLOCK = 0x00038042,
+ RPI_FWREQ_GET_GPIO_CONFIG = 0x00030043,
+ RPI_FWREQ_SET_GPIO_CONFIG = 0x00038043,
+ RPI_FWREQ_GET_PERIPH_REG = 0x00030045,
+ RPI_FWREQ_SET_PERIPH_REG = 0x00038045,
+ RPI_FWREQ_GET_POE_HAT_VAL = 0x00030049,
+ RPI_FWREQ_SET_POE_HAT_VAL = 0x00038049,
+ RPI_FWREQ_SET_POE_HAT_VAL_OLD = 0x00030050,
+ RPI_FWREQ_NOTIFY_XHCI_RESET = 0x00030058,
+ RPI_FWREQ_GET_REBOOT_FLAGS = 0x00030064,
+ RPI_FWREQ_SET_REBOOT_FLAGS = 0x00038064,
+ RPI_FWREQ_NOTIFY_DISPLAY_DONE = 0x00030066,
+
+ /* Dispmanx TAGS */
+ RPI_FWREQ_FRAMEBUFFER_ALLOCATE = 0x00040001,
+ RPI_FWREQ_FRAMEBUFFER_BLANK = 0x00040002,
+ RPI_FWREQ_FRAMEBUFFER_GET_PHYSICAL_WIDTH_HEIGHT = 0x00040003,
+ RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_WIDTH_HEIGHT = 0x00040004,
+ RPI_FWREQ_FRAMEBUFFER_GET_DEPTH = 0x00040005,
+ RPI_FWREQ_FRAMEBUFFER_GET_PIXEL_ORDER = 0x00040006,
+ RPI_FWREQ_FRAMEBUFFER_GET_ALPHA_MODE = 0x00040007,
+ RPI_FWREQ_FRAMEBUFFER_GET_PITCH = 0x00040008,
+ RPI_FWREQ_FRAMEBUFFER_GET_VIRTUAL_OFFSET = 0x00040009,
+ RPI_FWREQ_FRAMEBUFFER_GET_OVERSCAN = 0x0004000a,
+ RPI_FWREQ_FRAMEBUFFER_GET_PALETTE = 0x0004000b,
+ RPI_FWREQ_FRAMEBUFFER_GET_LAYER = 0x0004000c,
+ RPI_FWREQ_FRAMEBUFFER_GET_TRANSFORM = 0x0004000d,
+ RPI_FWREQ_FRAMEBUFFER_GET_VSYNC = 0x0004000e,
+ RPI_FWREQ_FRAMEBUFFER_GET_TOUCHBUF = 0x0004000f,
+ RPI_FWREQ_FRAMEBUFFER_GET_GPIOVIRTBUF = 0x00040010,
+ RPI_FWREQ_FRAMEBUFFER_RELEASE = 0x00048001,
+ RPI_FWREQ_FRAMEBUFFER_GET_DISPLAY_ID = 0x00040016,
+ RPI_FWREQ_FRAMEBUFFER_SET_DISPLAY_NUM = 0x00048013,
+ RPI_FWREQ_FRAMEBUFFER_GET_NUM_DISPLAYS = 0x00040013,
+ RPI_FWREQ_FRAMEBUFFER_GET_DISPLAY_SETTINGS = 0x00040014,
+ RPI_FWREQ_FRAMEBUFFER_TEST_PHYSICAL_WIDTH_HEIGHT = 0x00044003,
+ RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_WIDTH_HEIGHT = 0x00044004,
+ RPI_FWREQ_FRAMEBUFFER_TEST_DEPTH = 0x00044005,
+ RPI_FWREQ_FRAMEBUFFER_TEST_PIXEL_ORDER = 0x00044006,
+ RPI_FWREQ_FRAMEBUFFER_TEST_ALPHA_MODE = 0x00044007,
+ RPI_FWREQ_FRAMEBUFFER_TEST_VIRTUAL_OFFSET = 0x00044009,
+ RPI_FWREQ_FRAMEBUFFER_TEST_OVERSCAN = 0x0004400a,
+ RPI_FWREQ_FRAMEBUFFER_TEST_PALETTE = 0x0004400b,
+ RPI_FWREQ_FRAMEBUFFER_TEST_LAYER = 0x0004400c,
+ RPI_FWREQ_FRAMEBUFFER_TEST_TRANSFORM = 0x0004400d,
+ RPI_FWREQ_FRAMEBUFFER_TEST_VSYNC = 0x0004400e,
+ RPI_FWREQ_FRAMEBUFFER_SET_PHYSICAL_WIDTH_HEIGHT = 0x00048003,
+ RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_WIDTH_HEIGHT = 0x00048004,
+ RPI_FWREQ_FRAMEBUFFER_SET_DEPTH = 0x00048005,
+ RPI_FWREQ_FRAMEBUFFER_SET_PIXEL_ORDER = 0x00048006,
+ RPI_FWREQ_FRAMEBUFFER_SET_ALPHA_MODE = 0x00048007,
+ RPI_FWREQ_FRAMEBUFFER_SET_PITCH = 0x00048008,
+ RPI_FWREQ_FRAMEBUFFER_SET_VIRTUAL_OFFSET = 0x00048009,
+ RPI_FWREQ_FRAMEBUFFER_SET_OVERSCAN = 0x0004800a,
+ RPI_FWREQ_FRAMEBUFFER_SET_PALETTE = 0x0004800b,
+
+ RPI_FWREQ_FRAMEBUFFER_SET_TOUCHBUF = 0x0004801f,
+ RPI_FWREQ_FRAMEBUFFER_SET_GPIOVIRTBUF = 0x00048020,
+ RPI_FWREQ_FRAMEBUFFER_SET_VSYNC = 0x0004800e,
+ RPI_FWREQ_FRAMEBUFFER_SET_LAYER = 0x0004800c,
+ RPI_FWREQ_FRAMEBUFFER_SET_TRANSFORM = 0x0004800d,
+ RPI_FWREQ_FRAMEBUFFER_SET_BACKLIGHT = 0x0004800f,
+
+ RPI_FWREQ_VCHIQ_INIT = 0x00048010,
+
+ RPI_FWREQ_SET_PLANE = 0x00048015,
+ RPI_FWREQ_GET_DISPLAY_TIMING = 0x00040017,
+ RPI_FWREQ_SET_TIMING = 0x00048017,
+ RPI_FWREQ_GET_DISPLAY_CFG = 0x00040018,
+ RPI_FWREQ_SET_DISPLAY_POWER = 0x00048019,
+ RPI_FWREQ_GET_COMMAND_LINE = 0x00050001,
+ RPI_FWREQ_GET_DMA_CHANNELS = 0x00060001,
+};
+
+enum rpi_firmware_clk_id {
+ RPI_FIRMWARE_EMMC_CLK_ID = 1,
+ RPI_FIRMWARE_UART_CLK_ID,
+ RPI_FIRMWARE_ARM_CLK_ID,
+ RPI_FIRMWARE_CORE_CLK_ID,
+ RPI_FIRMWARE_V3D_CLK_ID,
+ RPI_FIRMWARE_H264_CLK_ID,
+ RPI_FIRMWARE_ISP_CLK_ID,
+ RPI_FIRMWARE_SDRAM_CLK_ID,
+ RPI_FIRMWARE_PIXEL_CLK_ID,
+ RPI_FIRMWARE_PWM_CLK_ID,
+ RPI_FIRMWARE_HEVC_CLK_ID,
+ RPI_FIRMWARE_EMMC2_CLK_ID,
+ RPI_FIRMWARE_M2MC_CLK_ID,
+ RPI_FIRMWARE_PIXEL_BVB_CLK_ID,
+ RPI_FIRMWARE_VEC_CLK_ID,
+ RPI_FIRMWARE_NUM_CLK_ID,
+};
+
+#endif /* INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_ */
--
2.34.1