[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v2 00/12] aspeed: fixes and extensions
From: |
Cédric Le Goater |
Subject: |
[PATCH v2 00/12] aspeed: fixes and extensions |
Date: |
Wed, 7 Jun 2023 06:39:31 +0200 |
Hello,
This series fixes issues spotted by Coverity and adds a couple of
improvements for the machine definition.
The first is to offer the capability to define all CS of all SPI
controllers without introducing new machine types, using a blockdev on
the command line :
-blockdev node-name=fmc0,driver=file,filename=./flash.img
-device mx66u51235f,addr=0x0,bus=ssi.0,drive=fmc0
instead of using drives which relies on the command line order.
Ultimately, we will get rid of drive_get(IF_MTD, ...) but we are not
there yet. For this, SSIPeripheral is extended with an "addr"
property.
A second extension is the introduction of a "bmc-console" machine
option to let the user define the default UART device of the machine
from the QEMU command line :
-M ast2500-evb,bmc-console=uart3
Last, a new "vfp-d32" CPU property is added to ARM CPUs to model FPUs
implementing VFPv4 without NEON support and with 16 64-bit FPU
registers (and not 32 registers). This is the case for the Cortex A7
of the Aspeed AST2600 SoC. I hope I got it right this time.
Thanks,
C.
Changes in v2:
- changed "addr" property to a uint8_t
- renamed "uart" machine option to "bmc-console"
Cédric Le Goater (12):
aspeed/hace: Initialize g_autofree pointer
aspeed: Introduce a boot_rom region at the machine level
aspeed: Use the boot_rom region of the fby35 machine
hw/ssi: Add an "addr" property to SSIPeripheral
hw/ssi: Introduce a ssi_get_cs() helper
aspeed/smc: Wire CS lines at reset
hw/ssi: Check for duplicate addresses
aspeed: Create flash devices only when defaults are enabled
m25p80: Introduce an helper to retrieve the BlockBackend of a device
aspeed: Get the BlockBackend of FMC0 from the flash device
aspeed: Introduce a "bmc-console" machine option
target/arm: Allow users to set the number of VFP registers
docs/system/arm/aspeed.rst | 11 +++++
include/hw/block/flash.h | 4 ++
include/hw/ssi/ssi.h | 5 +++
target/arm/cpu.h | 2 +
hw/arm/aspeed.c | 69 ++++++++++++++++++++++-------
hw/arm/aspeed_ast2600.c | 2 +
hw/arm/fby35.c | 29 ++++++------
hw/arm/stellaris.c | 4 +-
hw/arm/xilinx_zynq.c | 1 +
hw/arm/xlnx-versal-virt.c | 1 +
hw/arm/xlnx-zcu102.c | 2 +
hw/block/m25p80.c | 6 +++
hw/microblaze/petalogix_ml605_mmu.c | 1 +
hw/misc/aspeed_hace.c | 2 +-
hw/ssi/aspeed_smc.c | 8 ++++
hw/ssi/ssi.c | 43 ++++++++++++++++++
target/arm/cpu.c | 32 +++++++++++++
17 files changed, 190 insertions(+), 32 deletions(-)
--
2.40.1
- [PATCH v2 00/12] aspeed: fixes and extensions,
Cédric Le Goater <=