[PATCH v3 1/1] hw/arm/sbsa-ref: use XHCI to replace EHCI

[Yuquan Wang]

The current sbsa-ref cannot use EHCI controller which is only
able to do 32-bit DMA, since sbsa-ref doesn't have RAM below 4GB.
Hence, this uses XHCI to provide a usb controller with 64-bit
DMA capablity instead of EHCI.

Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn>
---
 hw/arm/sbsa-ref.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
index de21200ff9..4fb65704d4 100644
--- a/hw/arm/sbsa-ref.c
+++ b/hw/arm/sbsa-ref.c
@@ -40,6 +40,7 @@
 #include "hw/pci-host/gpex.h"
 #include "hw/qdev-properties.h"
 #include "hw/usb.h"
+#include "hw/usb/xhci.h"
 #include "hw/char/pl011.h"
 #include "hw/watchdog/sbsa_gwdt.h"
 #include "net/net.h"
@@ -82,7 +83,7 @@ enum {
     SBSA_SECURE_UART_MM,
     SBSA_SECURE_MEM,
     SBSA_AHCI,
-    SBSA_EHCI,
+    SBSA_XHCI,
 };
 
 struct SBSAMachineState {
@@ -119,7 +120,7 @@ static const MemMapEntry sbsa_ref_memmap[] = {
     [SBSA_SMMU] =               { 0x60050000, 0x00020000 },
     /* Space here reserved for more SMMUs */
     [SBSA_AHCI] =               { 0x60100000, 0x00010000 },
-    [SBSA_EHCI] =               { 0x60110000, 0x00010000 },
+    [SBSA_XHCI] =               { 0x60110000, 0x00010000 },
     /* Space here reserved for other devices */
     [SBSA_PCIE_PIO] =           { 0x7fff0000, 0x00010000 },
     /* 32-bit address PCIE MMIO space */
@@ -139,7 +140,7 @@ static const int sbsa_ref_irqmap[] = {
     [SBSA_SECURE_UART] = 8,
     [SBSA_SECURE_UART_MM] = 9,
     [SBSA_AHCI] = 10,
-    [SBSA_EHCI] = 11,
+    [SBSA_XHCI] = 11,
     [SBSA_SMMU] = 12, /* ... to 15 */
     [SBSA_GWDT_WS0] = 16,
 };
@@ -575,13 +576,15 @@ static void create_ahci(const SBSAMachineState *sms)
     }
 }
 
-static void create_ehci(const SBSAMachineState *sms)
+static void create_xhci(const SBSAMachineState *sms)
 {
-    hwaddr base = sbsa_ref_memmap[SBSA_EHCI].base;
-    int irq = sbsa_ref_irqmap[SBSA_EHCI];
+    hwaddr base = sbsa_ref_memmap[SBSA_XHCI].base;
+    int irq = sbsa_ref_irqmap[SBSA_XHCI];
+    DeviceState *dev = qdev_new(TYPE_XHCI_SYSBUS);
 
-    sysbus_create_simple("platform-ehci-usb", base,
-                         qdev_get_gpio_in(sms->gic, irq));
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
+    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
+    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, qdev_get_gpio_in(sms->gic, 
irq));
 }
 
 static void create_smmu(const SBSAMachineState *sms, PCIBus *bus)
@@ -803,7 +806,7 @@ static void sbsa_ref_init(MachineState *machine)
 
     create_ahci(sms);
 
-    create_ehci(sms);
+    create_xhci(sms);
 
     create_pcie(sms);
 
-- 
2.34.1