Re: [PATCH 1/1] hw/arm/sbsa-ref: use XHCI to replace EHCI

[Marcin Juszkiewicz]

W dniu 1.06.2023 o 18:39, Peter Maydell pisze:
> > So something like below? I only tested does system boot into Debian.
> > To make it work also changes to EDK2 would be needed to list XHCI
> > controller in DSDT.

> Yes, and you also want to drop the useless EHCI controller,
> and (as you note) both these things mean firmware changes
> so presumably that's a version-bump event?

First we need to get two patches through TF-A to get current information 
from QEMU. And it takes time.

https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/20871

https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/20953