[PATCH v9 07/17] hw/nvme: Omit errp for pci_add_capability

[Akihiko Odaki]

Omitting errp for pci_add_capability() causes it to abort if
capabilities overlap. This behavior is appropriate here because all of
the capabilities set in this device are defined in the program and
their overlap should not happen unless there is a programming error.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
---
 hw/nvme/ctrl.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index 87aeba0564..ff4e2beea6 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -7325,17 +7325,9 @@ static void nvme_init_sriov(NvmeCtrl *n, PCIDevice 
*pci_dev, uint16_t offset)
                               PCI_BASE_ADDRESS_MEM_TYPE_64, bar_size);
 }
 
-static int nvme_add_pm_capability(PCIDevice *pci_dev, uint8_t offset)
+static void nvme_add_pm_capability(PCIDevice *pci_dev, uint8_t offset)
 {
-    Error *err = NULL;
-    int ret;
-
-    ret = pci_add_capability(pci_dev, PCI_CAP_ID_PM, offset,
-                             PCI_PM_SIZEOF, &err);
-    if (err) {
-        error_report_err(err);
-        return ret;
-    }
+    pci_add_capability(pci_dev, PCI_CAP_ID_PM, offset, PCI_PM_SIZEOF);
 
     pci_set_word(pci_dev->config + offset + PCI_PM_PMC,
                  PCI_PM_CAP_VER_1_2);
@@ -7343,8 +7335,6 @@ static int nvme_add_pm_capability(PCIDevice *pci_dev, 
uint8_t offset)
                  PCI_PM_CTRL_NO_SOFT_RESET);
     pci_set_word(pci_dev->wmask + offset + PCI_PM_CTRL,
                  PCI_PM_CTRL_STATE_MASK);
-
-    return 0;
 }
 
 static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
-- 
2.38.1