[PULL 01/19] hw: aspeed_scu: Add AST2600 apb_freq and hpll calculation function

[Cédric Le Goater]

From: Steven Lee <steven_lee@aspeedtech.com>

AST2600's HPLL register offset and bit definition are different from
AST2500. Add a hpll calculation function and an apb frequency calculation
function based on SCU200 register description in ast2600v11.pdf.

Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: checkpatch fixes ]
Message-Id: <20220315075753.8591-2-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 include/hw/misc/aspeed_scu.h | 19 ++++++++++++++++++
 hw/misc/aspeed_scu.c         | 39 +++++++++++++++++++++++++++++++++++-
 2 files changed, 57 insertions(+), 1 deletion(-)

diff --git a/include/hw/misc/aspeed_scu.h b/include/hw/misc/aspeed_scu.h
index c14aff2bcbb5..8c4c8c8d5cbb 100644
--- a/include/hw/misc/aspeed_scu.h
+++ b/include/hw/misc/aspeed_scu.h
@@ -56,6 +56,7 @@ struct AspeedSCUClass {
 
     const uint32_t *resets;
     uint32_t (*calc_hpll)(AspeedSCUState *s, uint32_t hpll_reg);
+    uint32_t (*get_apb)(AspeedSCUState *s);
     uint32_t apb_divider;
     uint32_t nr_regs;
     const MemoryRegionOps *ops;
@@ -316,4 +317,22 @@ uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s);
         SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) |                       \
         SCU_AST2500_HW_STRAP_RESERVED1)
 
+/*
+ * SCU200   H-PLL Parameter Register (for Aspeed AST2600 SOC)
+ *
+ *  28:26  H-PLL Parameters
+ *  25     Enable H-PLL reset
+ *  24     Enable H-PLL bypass mode
+ *  23     Turn off H-PLL
+ *  22:19  H-PLL Post Divider (P)
+ *  18:13  H-PLL Numerator (M)
+ *  12:0   H-PLL Denumerator (N)
+ *
+ *  (Output frequency) = CLKIN(25MHz) * [(M+1) / (N+1)] / (P+1)
+ *
+ * The default frequency is 1200Mhz when CLKIN = 25MHz
+ */
+#define SCU_AST2600_H_PLL_BYPASS_EN                        (0x1 << 24)
+#define SCU_AST2600_H_PLL_OFF                              (0x1 << 23)
+
 #endif /* ASPEED_SCU_H */
diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c
index d06e179a6e65..d65f86df3d12 100644
--- a/hw/misc/aspeed_scu.c
+++ b/hw/misc/aspeed_scu.c
@@ -213,6 +213,11 @@ static uint32_t aspeed_scu_get_random(void)
 }
 
 uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s)
+{
+    return ASPEED_SCU_GET_CLASS(s)->get_apb(s);
+}
+
+static uint32_t aspeed_2400_scu_get_apb_freq(AspeedSCUState *s)
 {
     AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s);
     uint32_t hpll = asc->calc_hpll(s, s->regs[HPLL_PARAM]);
@@ -221,6 +226,15 @@ uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s)
         / asc->apb_divider;
 }
 
+static uint32_t aspeed_2600_scu_get_apb_freq(AspeedSCUState *s)
+{
+    AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s);
+    uint32_t hpll = asc->calc_hpll(s, s->regs[AST2600_HPLL_PARAM]);
+
+    return hpll / (SCU_CLK_GET_PCLK_DIV(s->regs[AST2600_CLK_SEL]) + 1)
+        / asc->apb_divider;
+}
+
 static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size)
 {
     AspeedSCUState *s = ASPEED_SCU(opaque);
@@ -426,6 +440,26 @@ static uint32_t aspeed_2500_scu_calc_hpll(AspeedSCUState 
*s, uint32_t hpll_reg)
     return clkin * multiplier;
 }
 
+static uint32_t aspeed_2600_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg)
+{
+    uint32_t multiplier = 1;
+    uint32_t clkin = aspeed_scu_get_clkin(s);
+
+    if (hpll_reg & SCU_AST2600_H_PLL_OFF) {
+        return 0;
+    }
+
+    if (!(hpll_reg & SCU_AST2600_H_PLL_BYPASS_EN)) {
+        uint32_t p = (hpll_reg >> 19) & 0xf;
+        uint32_t n = (hpll_reg >> 13) & 0x3f;
+        uint32_t m = hpll_reg & 0x1fff;
+
+        multiplier = ((m + 1) / (n + 1)) / (p + 1);
+    }
+
+    return clkin * multiplier;
+}
+
 static void aspeed_scu_reset(DeviceState *dev)
 {
     AspeedSCUState *s = ASPEED_SCU(dev);
@@ -525,6 +559,7 @@ static void aspeed_2400_scu_class_init(ObjectClass *klass, 
void *data)
     dc->desc = "ASPEED 2400 System Control Unit";
     asc->resets = ast2400_a0_resets;
     asc->calc_hpll = aspeed_2400_scu_calc_hpll;
+    asc->get_apb = aspeed_2400_scu_get_apb_freq;
     asc->apb_divider = 2;
     asc->nr_regs = ASPEED_SCU_NR_REGS;
     asc->ops = &aspeed_ast2400_scu_ops;
@@ -545,6 +580,7 @@ static void aspeed_2500_scu_class_init(ObjectClass *klass, 
void *data)
     dc->desc = "ASPEED 2500 System Control Unit";
     asc->resets = ast2500_a1_resets;
     asc->calc_hpll = aspeed_2500_scu_calc_hpll;
+    asc->get_apb = aspeed_2400_scu_get_apb_freq;
     asc->apb_divider = 4;
     asc->nr_regs = ASPEED_SCU_NR_REGS;
     asc->ops = &aspeed_ast2500_scu_ops;
@@ -716,7 +752,8 @@ static void aspeed_2600_scu_class_init(ObjectClass *klass, 
void *data)
     dc->desc = "ASPEED 2600 System Control Unit";
     dc->reset = aspeed_ast2600_scu_reset;
     asc->resets = ast2600_a3_resets;
-    asc->calc_hpll = aspeed_2500_scu_calc_hpll; /* No change since AST2500 */
+    asc->calc_hpll = aspeed_2600_scu_calc_hpll;
+    asc->get_apb = aspeed_2600_scu_get_apb_freq;
     asc->apb_divider = 4;
     asc->nr_regs = ASPEED_AST2600_SCU_NR_REGS;
     asc->ops = &aspeed_ast2600_scu_ops;
-- 
2.35.1