[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 29/41] hw/intc/arm_gicv3_redist: Recalculate hppvlpi on VPENDBASE
From: |
Peter Maydell |
Subject: |
[PATCH 29/41] hw/intc/arm_gicv3_redist: Recalculate hppvlpi on VPENDBASER writes |
Date: |
Fri, 8 Apr 2022 15:15:38 +0100 |
The guest uses GICR_VPENDBASER to tell the redistributor when it is
scheduling or descheduling a vCPU. When it writes and changes the
VALID bit from 0 to 1, it is scheduling a vCPU, and we must update
our view of the current highest priority pending vLPI from the new
Pending and Configuration tables. When it writes and changes the
VALID bit from 1 to 0, it is descheduling, which means that there is
no longer a highest priority pending vLPI.
The specification allows the implementation to use part of the vLPI
Pending table as an IMPDEF area where it can cache information when a
vCPU is descheduled, so that it can avoid having to do a full rescan
of the tables when the vCPU is scheduled again. For now, we don't
take advantage of this, and simply do a complete rescan.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/arm_gicv3_redist.c | 87 ++++++++++++++++++++++++++++++++++++--
1 file changed, 84 insertions(+), 3 deletions(-)
diff --git a/hw/intc/arm_gicv3_redist.c b/hw/intc/arm_gicv3_redist.c
index 2379389d14e..bfdde36a206 100644
--- a/hw/intc/arm_gicv3_redist.c
+++ b/hw/intc/arm_gicv3_redist.c
@@ -185,6 +185,87 @@ static void gicr_write_ipriorityr(GICv3CPUState *cs,
MemTxAttrs attrs, int irq,
cs->gicr_ipriorityr[irq] = value;
}
+static void gicv3_redist_update_vlpi_only(GICv3CPUState *cs)
+{
+ uint64_t ptbase, ctbase, idbits;
+
+ if (!FIELD_EX64(cs->gicr_vpendbaser, GICR_VPENDBASER, VALID)) {
+ cs->hppvlpi.prio = 0xff;
+ return;
+ }
+
+ ptbase = cs->gicr_vpendbaser & R_GICR_VPENDBASER_PHYADDR_MASK;
+ ctbase = cs->gicr_vpropbaser & R_GICR_VPROPBASER_PHYADDR_MASK;
+ idbits = FIELD_EX64(cs->gicr_vpropbaser, GICR_VPROPBASER, IDBITS);
+
+ update_for_all_lpis(cs, ptbase, ctbase, idbits, true, &cs->hppvlpi);
+}
+
+static void gicv3_redist_update_vlpi(GICv3CPUState *cs)
+{
+ gicv3_redist_update_vlpi_only(cs);
+ gicv3_cpuif_virt_irq_fiq_update(cs);
+}
+
+static void gicr_write_vpendbaser(GICv3CPUState *cs, uint64_t newval)
+{
+ /* Write @newval to GICR_VPENDBASER, handling its effects */
+ bool oldvalid = FIELD_EX64(cs->gicr_vpendbaser, GICR_VPENDBASER, VALID);
+ bool newvalid = FIELD_EX64(newval, GICR_VPENDBASER, VALID);
+ bool pendinglast;
+
+ /*
+ * The DIRTY bit is read-only and for us is always zero;
+ * other fields are writeable.
+ */
+ newval &= R_GICR_VPENDBASER_INNERCACHE_MASK |
+ R_GICR_VPENDBASER_SHAREABILITY_MASK |
+ R_GICR_VPENDBASER_PHYADDR_MASK |
+ R_GICR_VPENDBASER_OUTERCACHE_MASK |
+ R_GICR_VPENDBASER_PENDINGLAST_MASK |
+ R_GICR_VPENDBASER_IDAI_MASK |
+ R_GICR_VPENDBASER_VALID_MASK;
+
+ if (oldvalid && newvalid) {
+ /*
+ * Changing other fields while VALID is 1 is UNPREDICTABLE;
+ * we choose to log and ignore the write.
+ */
+ if (cs->gicr_vpendbaser ^ newval) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Changing GICR_VPENDBASER when VALID=1 "
+ "is UNPREDICTABLE\n", __func__);
+ }
+ return;
+ }
+ if (!oldvalid && !newvalid) {
+ cs->gicr_vpendbaser = newval;
+ return;
+ }
+
+ if (newvalid) {
+ /*
+ * Valid going from 0 to 1: update hppvlpi from tables.
+ * If IDAI is 0 we are allowed to use the info we cached in
+ * the IMPDEF area of the table.
+ * PendingLast is RES1 when we make this transition.
+ */
+ pendinglast = true;
+ } else {
+ /*
+ * Valid going from 1 to 0:
+ * Set PendingLast if there was a pending enabled interrupt
+ * for the vPE that was just descheduled.
+ * If we cache info in the IMPDEF area, write it out here.
+ */
+ pendinglast = cs->hppvlpi.prio != 0xff;
+ }
+
+ newval = FIELD_DP64(newval, GICR_VPENDBASER, PENDINGLAST, pendinglast);
+ cs->gicr_vpendbaser = newval;
+ gicv3_redist_update_vlpi(cs);
+}
+
static MemTxResult gicr_readb(GICv3CPUState *cs, hwaddr offset,
uint64_t *data, MemTxAttrs attrs)
{
@@ -493,10 +574,10 @@ static MemTxResult gicr_writel(GICv3CPUState *cs, hwaddr
offset,
cs->gicr_vpropbaser = deposit64(cs->gicr_vpropbaser, 32, 32, value);
return MEMTX_OK;
case GICR_VPENDBASER:
- cs->gicr_vpendbaser = deposit64(cs->gicr_vpendbaser, 0, 32, value);
+ gicr_write_vpendbaser(cs, deposit64(cs->gicr_vpendbaser, 0, 32,
value));
return MEMTX_OK;
case GICR_VPENDBASER + 4:
- cs->gicr_vpendbaser = deposit64(cs->gicr_vpendbaser, 32, 32, value);
+ gicr_write_vpendbaser(cs, deposit64(cs->gicr_vpendbaser, 32, 32,
value));
return MEMTX_OK;
default:
return MEMTX_ERROR;
@@ -557,7 +638,7 @@ static MemTxResult gicr_writell(GICv3CPUState *cs, hwaddr
offset,
cs->gicr_vpropbaser = value;
return MEMTX_OK;
case GICR_VPENDBASER:
- cs->gicr_vpendbaser = value;
+ gicr_write_vpendbaser(cs, value);
return MEMTX_OK;
default:
return MEMTX_ERROR;
--
2.25.1
- Re: [PATCH 19/41] hw/intc/arm_gicv3_its: Implement INV for virtual interrupts, (continued)
- [PATCH 20/41] hw/intc/arm_gicv3_its: Implement VMOVI, Peter Maydell, 2022/04/08
- [PATCH 22/41] hw/intc/arm_gicv3: Implement GICv4's new redistributor frame, Peter Maydell, 2022/04/08
- [PATCH 24/41] hw/intc/arm_gicv3_cpuif: Split "update vIRQ/vFIQ" from gicv3_cpuif_virt_update(), Peter Maydell, 2022/04/08
- [PATCH 27/41] hw/intc/arm_gicv3_redist: Factor out "update hpplpi for one LPI" logic, Peter Maydell, 2022/04/08
- [PATCH 29/41] hw/intc/arm_gicv3_redist: Recalculate hppvlpi on VPENDBASER writes,
Peter Maydell <=
- [PATCH 31/41] hw/intc/arm_gicv3_redist: Implement gicv3_redist_process_vlpi(), Peter Maydell, 2022/04/08
- [PATCH 34/41] hw/intc/arm_gicv3_redist: Implement gicv3_redist_mov_vlpi(), Peter Maydell, 2022/04/08
- [PATCH 35/41] hw/intc/arm_gicv3_redist: Implement gicv3_redist_vinvall(), Peter Maydell, 2022/04/08
- [PATCH 38/41] hw/intc/arm_gicv3: Allow 'revision' property to be set to 4, Peter Maydell, 2022/04/08