Re: [PATCH v3 0/9] Add support for AST1030 SoC

[Jamin Lin]

The 04/01/2022 03:04, Jamin Lin wrote:
Please ignore this patch series, I lost to drop
ASPEED_SMC_FEATURE_WDT_CONTROL flag.
will resend v4 patch
Thanks-Jamin
> Changes from v3:
> - remove AspeedMiniBmcMachineState state structure and
>   AspeedMiniBmcMachineClass class
> - remove redundant new line in hw/arm/aspeed_ast10xx.c
> - drop the ASPEED_SMC_FEATURE_WDT_CONTROL flag in hw/ssi/aspeed_smc.c
> 
> Changes from v2:
> - replace aspeed_ast1030.c with aspeed_ast10xx.c for minibmc SOCs family 
> support
> - Add "ast1030-evb" machine in aspeed.c and removes aspeed_minibmc.c
> 
> Changes from v1:
> The patch series supports ADC, SCU, SMC, TIMER, and WDT for AST1030 SoC.
> Add avocado test case for "ast1030-evb" machine.
> 
> Test steps:
> 1. Download image from
>    
> https://github.com/AspeedTech-BMC/zephyr/releases/download/v00.01.04/ast1030-evb-demo.zip
> 2. Extract the zip file to obtain zephyr.elf
> 3. Run ./qemu-system-arm -M ast1030-evb -kernel $PATH/zephyr.elf -nographic
> 4. Test IO by Zephyr command line, commands are refer to Aspeed Zephyr
>    SDK User Guide below
>    
> https://github.com/AspeedTech-BMC/zephyr/releases/download/v00.01.04/Aspeed_Zephy_SDK_User_Guide_v00.01.04.pdf
>    - ADC(channel 0):
>        uart:~$ adc ADC0 resolution 10
>        uart:~$ adc ADC0 calibrate 1
>        uart:~$ adc ADC0 read_format 1
>        uart:~$ adc ADC0 read 0
>        [Result]
>        read: 1416mv
> 
>    - SCU
>        uart:~$ md 7e6e2040
>        uart:~$ md 7e6e2080
>        uart:~$ md 7e6e20d0
>        uart:~$ md 7e6e2200
>        uart:~$ md 7e6e2300
>        uart:~$ md 7e6e25b0
>        [Result]
>        The register value should match the value of ast1030_a1_resets
>        in aspeed_scu.c
> 
>    - Flash(fmc_cs0):
>        uart:~$ flash write fmc_cs0 0 0x12345678 0x87654321 0x34127856 
> 0x78563412
>        uart:~$ flash read fmc_cs0 0 10
>        [Result]
>        00000000: 78 56 34 12 21 43 65 87  56 78 12 34 12 34 56 78 |xV4.!Ce. 
> Vx.4.4Vx|
> 
>        uart:~$ flash erase fmc_cs0 0
>        uart:~$ flash read fmc_cs0 0 10
>        [Result]
>        00000000: ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff |........ 
> ........|
> 
>    - Timer(TIMER0):
>        uart:~$ timer start TIMER0 -p 2000 -t 0
>        TIMER0: period 20000 ms, type 0
>        [Result]
>        timer expired after 2 seconds
> 
>    - Watchdog(WDT1):
>        uart:~$ mw 7e785008 4755
>        uart:~$ mw 7e78500c 1
>        [Result]
>        soc reset after 22 seconds
> 
> Based-on: 20220315075753.8591-3-steven_lee@aspeedtech.com
> ([v2,2/2] hw: aspeed_scu: Introduce clkin_25Mhz attribute)
> 
> 
> Jamin Lin (2):
>   aspeed: Add an AST1030 eval board
>   test/avocado/machine_aspeed.py: Add ast1030 test case
> 
> Steven Lee (7):
>   aspeed/adc: Add AST1030 support
>   aspeed/smc: Add AST1030 support
>   aspeed/wdt: Fix ast2500/ast2600 default reload value.
>   aspeed/wdt: Add AST1030 support
>   aspeed/timer: Add AST1030 support
>   aspeed/scu: Add AST1030 support
>   aspeed/soc : Add AST1030 support
> 
>  hw/adc/aspeed_adc.c              |  16 ++
>  hw/arm/aspeed.c                  |  97 ++++++++++
>  hw/arm/aspeed_ast10xx.c          | 299 +++++++++++++++++++++++++++++++
>  hw/arm/meson.build               |   6 +-
>  hw/misc/aspeed_scu.c             |  63 +++++++
>  hw/ssi/aspeed_smc.c              | 159 ++++++++++++++++
>  hw/timer/aspeed_timer.c          |  17 ++
>  hw/watchdog/wdt_aspeed.c         |  34 +++-
>  include/hw/adc/aspeed_adc.h      |   1 +
>  include/hw/arm/aspeed.h          |   6 +-
>  include/hw/arm/aspeed_soc.h      |   3 +
>  include/hw/misc/aspeed_scu.h     |  25 +++
>  include/hw/timer/aspeed_timer.h  |   1 +
>  include/hw/watchdog/wdt_aspeed.h |   3 +
>  tests/avocado/machine_aspeed.py  |  36 ++++
>  15 files changed, 760 insertions(+), 6 deletions(-)
>  create mode 100644 hw/arm/aspeed_ast10xx.c
>  create mode 100644 tests/avocado/machine_aspeed.py
> 
> -- 
> 2.17.1
>